YAN CHENG SANYI WELL CONTROL EQUIPMENT AND PARTS
Standpipe manifold
1 Standpipe Manifold “H” Assembly
2 Standpipe Manifold Skid
3 5″ Stand Pipe Assembly
BOP RAMS
1 95/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi
2 51/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi
3 27/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi
4 5″ pipe ram for Cameron double ram BOP 135/8″ 10000psi
5 Blind ram for Cameron double ram BOP 135/8″ 10000psi
CHOKE MANIFOLD
1 Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet)
2 Control panel for Choke manifold with stroke counter
3 4 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT
4 Choke Manifold, 21/16” 5000psi, see drawing
5 Choke & kill manifold:
Consist of equipment as following
– Mounted on oil field skid
– Pressure rating 10,000psi
– Kill and choke manifolds are anti H2S
– The bore diameter of two side in choke manifold is 4-1/16″
Including
– 0 – 15000 psi range pressure gauge (1) no
– Hydraulic actuated choke valve (1) no
– Manual operated choke valve (2) nos
– 4-1/16″ Manual gate valve (12) nos
– 4-1/16″ Hydraulic gate valve (1) no
– Remote control panel at drilling rig floor (1) no
(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.) 1 EA
Kill manifold
1 Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet) 89,895.00
KOOMEY TEST PUMP & ACCESSORIES
1 0 – 10000psi with fill & feed pump, test pump, test pressure gauge
2 Koomey Unit to suit the 11” BOP (type FKQ640-6)
3 Koomey Unit to suit the 7 1/16” BOP.
4 BOP CONTROL UNIT (KOOMY)
Production model: FK125-3 control device
The assembly consist of : remote control console, common enclosure and explosion-proof electric instrument
- Controlled object: annulus, blind and semi-enclosed
- Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear
- VOLUME of oil reservoir: 440L
- Motor power: 7.5kw
- System working pressure: 21MPa set
CROSS OVER SUB
1 6-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs
2 4” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs
3 6-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection
4 6-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections
5 8” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub
6 4-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub
7 Double pin sub of undernoted connection with appropriate OD x ID
a) 4” IF x 4-1/2” API Reg
8 Double pin sub of undernoted connection with appropriate OD x ID
b) 6-5/8” R
9 Double pin sub of undernoted connection with appropriate OD x ID
c) 6-5/8” R – 7-5/8” R
WELL CONTROL ACCESSORIES
1 One no. Kelly cock suitable for 41/2″ IF drill pipe connection
2 Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections
3 Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections
4 5″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connections
Kelly cock and valve
1 Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″
2 Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″
3 Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″
4 Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″
5 Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″
6 Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″
7 Test Pump 15000PSI with Chart Recorder
8 Plug Valve Repair Kit;2”X5000psi
9 Plug Valve Repair Kit;2”X10000psi
10 Plug Valve Repair Kit;2”X15000psi
11 Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI
12 Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI
13 Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSI
BOP
1 71/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
2 71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set
3 71/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-3,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
4 71/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-10,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set
5 71/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
6 71/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set
7 11″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
8 11″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
9 11″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
10 11″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
11 11″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
12 11″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
13 135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
14 135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
15 135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
16 135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
17 135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
18 135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
19 71/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
20 71/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set
21 11″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
22 11″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
23 135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set
24 135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set
25 11” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20 set
26 135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20 set
27 7 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe rams set
28 7 1/16” 3000psi Annular BOP set
29 Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each. set
30 Control System for Surface Mounted BOP Stacks, FKQ840-8 set
31 DOUBLE RAM BOP
71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Studded 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set
32 Ram assembly
27/8” Ram sub assembly for 71/16″-5,000psi ram bop set
33 Ram assembly
31/2” Ram sub assembly for 71/16″-5,000psi ram bop set
34 ANNULAR BOP
71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20 set
ADAPTOR FLANGE
1 ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETS nos
2 ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETS nos
3 ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS nos
4 ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS nos
Blind flange
1 21 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″ nos 85,000.00
2 13 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″ nos
Choke lines and kill lines
1 COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 4-1/16” 10000psi HCR valve
– two (2) 4-1/16” 10000psi manual gate valve
– two (2) 4-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205
– six (6) ring gasket, BX-155 set
2 COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 2-1/16” 10000psi HCR valve
– two (2) 2-1/16” 10000psi manual gate valve
– two (2) 2-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 3/4” x 135
– six (6) ring gasket, BX-152 set
3 Choke line: Consists of (2) valves
– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no
– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no
– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos 1 set
4 Kill line: Consists of (3) valves
– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no
– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no
– Check valve (2-9/16″ x 10,000 psi) 1-no
– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos 1 set
Gate valve
1 Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. nos 12,000.00
2 Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated. nos 16,500.00
3 Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. nos 7,200.00
4 Gate valve, 2-1/16” 5000psi 1 nos 3,800.00
5 Gate valve, 2-9/16” 5000psi 1 nos 4,800.00
6 Gate valve, 3-1/8” 5000psi 1 nos
7 Gate valve, 4-1/16” 5000psi 1 nos
Others
1 Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet. nos
2 Studded cross Studded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. nos
3 Studded cross 4 x 41/16″ x 10000psi w.p. nos
4 Studded cross 4 x 41/16″ x 10000psi w.p. nos
5 Flanged spool Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mm nos
6 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mm nos
7 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded nos
8 41/16″ x 10000psi Blind flanged nos
9 DSA, 41/16″ 10000psi x 31/16″ x 10000psi nos
10 Ring gasket API BX-155 nos
11 Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
12 Ring gasket API BX-152 nos
13 Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
14 Ring gasket API BX-154 nos
15 Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
16 Needle valve, 1/2”NPT 10000psi, male x female nos
17 Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case nos
18 Fabricated skid base nos
19 Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections. nos
20 Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided. nos
21 Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connection nos
22 Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. nos
23 Studded cross 4 x 41/16″ x 10000psi w.p. nos
24 Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p. nos
25 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12” nos
26 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7” nos
27 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded nos
28 41/16″ x 10000psi Blind flanged nos
29 Ring gasket API BX-154 nos
30 Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
31 Ring gasket API BX-155 nos
32 Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
33 Ring gasket API BX-152 nos
34 Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos
35 Lengthen flanged 31/16” x 10000psi. nos
36 Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case nos
37 Fabricated skid base nos
38 50mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIAL nos
39 Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi） nos
40 13-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line. nos
41 Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight. nos
42 Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5M nos
43 Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft long nos
44 3″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502 nos
Standpipe manifold
1 Standpipe Manifold “H” Assembly 27,400.00
2 Standpipe Manifold Skid 2,500.00
3 5″ Stand Pipe Assembly 74,000.00
BOP RAMS
1 95/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi 25,000.00
2 51/2″ pipe ram for Cameron double ram BOP 135/8″ 10000psi 25,000.00
3 27/8″ pipe ram for Cameron double ram BOP 135/8″ 10000psi 25,000.00
4 5″ pipe ram for Cameron double ram BOP 135/8″ 10000psi 25,000.00
5 Blind ram for Cameron double ram BOP 135/8″ 10000psi 25,000.00
CHOKE MANIFOLD
1 Choke manifold 31/16″ 10000psi w.p. (see Choke Manifold sheet) 240,990.00
2 Control panel for Choke manifold with stroke counter 57,000.00
3 4 1/16“10,000PSI CAMERON CHOKE MANIFOLD WITH 2*HYDRAULIC SUPERCHOKES PER UNIT 344,840.00
4 Choke Manifold, 21/16” 5000psi, see drawing 58,000.00
5 Choke & kill manifold:
Consist of equipment as following
– Mounted on oil field skid
– Pressure rating 10,000psi
– Kill and choke manifolds are anti H2S
– The bore diameter of two side in choke manifold is 4-1/16″
Including
– 0 – 15000 psi range pressure gauge (1) no
– Hydraulic actuated choke valve (1) no
– Manual operated choke valve (2) nos
– 4-1/16″ Manual gate valve (12) nos
– 4-1/16″ Hydraulic gate valve (1) no
– Remote control panel at drilling rig floor (1) no
(Complete with hydraulic pump assembly, hydraulic choke with position indicator, pump stroke counter, pressure gauges and fitting accessories.) 1 EA 566,000.00
Kill manifold
1 Kill manifold 31/16″ 10000psi w.p. (see Kill Manifold sheet) 89,895.00
KOOMEY TEST PUMP & ACCESSORIES
1 0 – 10000psi with fill & feed pump, test pump, test pressure gauge 77,000.00
2 Koomey Unit to suit the 11” BOP (type FKQ640-6) 290,000.00
3 Koomey Unit to suit the 7 1/16” BOP. 130,000.00
4 BOP CONTROL UNIT (KOOMY)
Production model: FK125-3 control device
The assembly consist of : remote control console, common enclosure and explosion-proof electric instrument
- Controlled object: annulus, blind and semi-enclosed
- Accumulator sets: 25L X 5=125L nominal volume, 62.5L available liquid, alignment on rear
- VOLUME of oil reservoir: 440L
- Motor power: 7.5kw
- System working pressure: 21MPa set 125,000.00
CROSS OVER SUB
1 6-1/2” OD x 4” IF box up, 9-1/2” OD x 7-5/8” API regular pin down cross over subs 3,850.00
2 4” IF box up x 6-5/8” API Regular pin down crossover bottle neck subs 2,700.00
3 6-1/2” OD cross over sub with 4-1/2” API IF Box up x 4” API IF Pin Down connection 2,700.00
4 6-1/2” OD cross over subs with 4-1/2” API regular pin down and 4-1/2” IF box up connections 2,700.00
5 8” OD x 6-5/8” API regular box up and 9-1/2” OD x 7-5/8” API regular pin down cross over sub 3,200.00
6 4-1/2” IF Box up x 6-5/8” API Reg. Pin down bottle neck sub 2,700.00
7 Double pin sub of undernoted connection with appropriate OD x ID
a) 4” IF x 4-1/2” API Reg 2,700.00
8 Double pin sub of undernoted connection with appropriate OD x ID
b) 6-5/8” R 2,700.00
9 Double pin sub of undernoted connection with appropriate OD x ID
c) 6-5/8” R – 7-5/8” R 2,700.00
WELL CONTROL ACCESSORIES
1 One no. Kelly cock suitable for 41/2″ IF drill pipe connection 12,500.00
2 Dropin type back pressure valve complete with landing sub, 6 5/8″ API reg. connections 11,000.00
3 Dropin type back pressure valve complete with landing sub, 4 1/2″ API IF. connections 8,500.00
4 5″ insid BOP for making up with drill pipe, having ratings to suit BOP stack rating and with matching thread connections 7,700.00
Kelly cock and valve
1 Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 24″ 9,500.00
2 Mud Check Kelly valve, 51/4″ IF 10000psi wp, Length 36″ 13,000.00
3 Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ 12,000.00
4 Upper Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ 15,000.00
5 Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 24″ 12,000.00
6 Lower Kelly Cock, Pressure rating 51/4″ IF 10000psi wp, Length 36″ 15,000.00
7 Test Pump 15000PSI with Chart Recorder 75,000.00
8 Plug Valve Repair Kit;2”X5000psi 2,280.00
9 Plug Valve Repair Kit;2”X10000psi 2,580.00
10 Plug Valve Repair Kit;2”X15000psi 2,860.00
11 Tubing Cock Valve Repair kit;2 7/8” UPTBG X 5000PSI 2,850.00
12 Lower Kelly Valve Service Kit;3 1/2” IFX10000PSI 2,850.00
13 Upper Kelly Valve Service Kit;6 5/8” REG LH X 10000PSI 3,250.00
BOP
1 71/16″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd18000
2 71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set usd30670
3 71/16″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-3,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd20500
4 71/16″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-10,000psi wp BX-156
– Bottom connection: Flanged 71/16″-10,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set usd36000
5 71/16″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd25300
6 71/16″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-15,000psi wp BX-156
– Bottom connection: Flanged 71/16″-15,000psi wp BX-156
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set usd42670
7 11″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd24000
8 11″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd33500
9 11″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd32500
10 11″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-10,000psi wp BX-158
– Bottom connection: Flanged 11″-10,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd49500
11 11″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd173300
12 11″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-15,000psi wp BX-158
– Bottom connection: Flanged 11″-15,000psi wp BX-158
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 280000
13 135/8″-5,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 40000
14 135/8″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 66700
15 135/8″-10,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 56000
16 135/8″-10,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-10,000psi wp BX-159
– Bottom connection: Flanged 135/8″-10,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 10,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 94600
17 135/8″-15,000psi Single ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″”-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 266700
18 135/8″-15,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-15,000psi wp BX-159
– Bottom connection: Flanged 135/8″-15,000psi wp BX-159
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 15,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 446700
19 71/16″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 15000
20 71/16″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set 24,500.00
21 11″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 24000
22 11″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 11″-5,000psi wp R-54
– Bottom connection: Flanged 11″-5,000psi wp R-54
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 31/8″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 40000
23 135/8″-5,000psi Single ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″”-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 2 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram set usd 32000
24 135/8″-5,000psi Double ram bop, Shaffer type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Flanged 135/8″-5,000psi wp BX-160
– Bottom connection: Flanged 135/8″-5,000psi wp BX-160
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 41/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind pipe ram set usd 53300
25 11” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 11” x 5,000psi Studded top x 11” x 5,000psi Flanged bottom. Temperature class: T-20 set usd 25000
26 135/8″” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 135/8” Vertical Bore. 135/8″” x 5,000psi Studded top x 135/8″” x 5,000psi Flanged bottom. Temperature class: T-20 set usd 27500
27 7 1/16” 3000psi double gate BOP complete with blind and 3 ½” pipe rams set usd 240000
28 7 1/16” 3000psi Annular BOP set usd 180000
29 Cameron Double BOP 71/16″ 10000psi having top and bottom connection of 71/16″ 10000psi flange, with side outlets (4 Nos.) complete with ring joints gasket, studs & nuts and with 27/8″ and blind rams, one pair each. set usd 230000
30 Control System for Surface Mounted BOP Stacks, FKQ840-8 set usd420000
31 DOUBLE RAM BOP
71/16″-5,000psi Double ram bop, Cameron type with standard bonnet bolts Manufactured in accordance with API Specification 16A. Third Edition, June 2004 and NACE MR0175 per API Specification 16A.
– Top connection: Studded 71/16″-5,000psi wp R-46
– Bottom connection: Flanged 71/16″-5,000psi wp R-46
– Stainless Steel Lay: Top and Bottom connections and all side outlets.
– Side outlets: Qty 4 studded 21/16″ x 5,000psi wp
– Temperature Class:T-20
– Ram sub assy, Upper 23/8″ pipe ram, Lower blind ram set usd 230000
32 Ram assembly
27/8” Ram sub assembly for 71/16″-5,000psi ram bop set 4,000.00
33 Ram assembly
31/2” Ram sub assembly for 71/16″-5,000psi ram bop set 4,000.00
34 ANNULAR BOP
71/16” x 5,000psi WP Hydraulic operated Annular BOP, SHAFFER type, According to API 16A. Latest edition. 11” Vertical Bore. 71/16” x 5,000psi Studded top x 71/16” x 5,000psi Flanged bottom. Temperature class: T-20 set 95,000.00
ADAPTOR FLANGE
1 ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 5K (R-27) X 3 1/16” 10K (BX154), COMPLETE WITH STUDS, NUTS& RING GASKETS nos 3,000.00
2 ADAPTOR FLANGE, DOUBLE STUDDED, 3 1/8” 5K (R-35) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS& RING GASKETS nos 3,100.00
3 ADAPTOR FLANGE, DOUBLE STUDDED, 4 1/16” 5K (R-39) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS nos 3,300.00
4 ADAPTOR FLANGE, DOUBLE STUDDED, 2 9/16” 10K (BX153) X 3 1/16” 10K (BX154) COMPLETE WITH STUDS, NUTS&RING GASKETS nos 3,000.00
Blind flange
1 21 1/4″ BLIND FLANGE 2000PSI WITH 1″ PORT TEST, RING GASKET RX-73 N/BOLT24-1 5/8″ nos 85,000.00
2 13 5/8″ BLIND FLANGE 5000PSI WITH 1″ PORT TEST, RING GASKET RX-160 N/BOLT16-1 5/8″ nos 60,000.00
Choke lines and kill lines
1 COMPLETE 4 1/16″10,000PSI CHOKE LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 4-1/16” 10000psi HCR valve
– two (2) 4-1/16” 10000psi manual gate valve
– two (2) 4-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 1-1/8”x205
– six (6) ring gasket, BX-155 set 69,000.00
2 COMPLETE 2 1/16″10,000PSI KILL LINES WITH 1 HCR&2 MANUAL PER SET CONSISTING OF:
– one (1) 2-1/16” 10000psi HCR valve
– two (2) 2-1/16” 10000psi manual gate valve
– two (2) 2-1/16” 10000psi flanged spool, 3m length
– forty eight (48) stud & ninety six (96) nut, 3/4” x 135
– six (6) ring gasket, BX-152 set 38,000.00
3 Choke line: Consists of (2) valves
– Gate valve (4-1/16″ x 10,000psi) Manual operated (1) no
– Gate valve (4-1/16″ x 10,000psi) Hydraulic operated (1) no
– 4″ high pressure hose, 10,000psi, 35-ft with 4-1/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 4-1/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos 1 set 108,000.00
4 Kill line: Consists of (3) valves
– Gate valve (2-9/16″ x 10,000 psi) Manual operated (1) no
– Gate valve (2-9/16″ x 10,000 psi) Hydraulic operated (1) no
– Check valve (2-9/16″ x 10,000 psi) 1-no
– 2″ high pressure hose, 10,000 psi, 30-ft with 2-9/16″ x 10,000 flange at both ends with stud bolts and nuts complete set (1) no
– 2-9/16″ x 10,000 by 2-1/16″ x 10,000 adaptor flange complete with Ring joint gasket, stud bolts and nuts (2) nos 1 set 7,000.00
Gate valve
1 Gate valves 31/16″ x 10000psi w.p. flanged ends type BX-154, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. nos 12,000.00
2 Gate valves 41/16″ x 10000psi w.p. flanged ends type BX-155, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats , hand wheel operated. nos 16,500.00
3 Gate valves 21/16″ x 10000psi w.p. flanged ends type BX-152, full bore through conduit non-rising stem, metal to metal seal between gate and seat and between seats, hand wheel operated. nos 7,200.00
4 Gate valve, 2-1/16” 5000psi 1 nos 3,800.00
5 Gate valve, 2-9/16” 5000psi 1 nos 4,800.00
6 Gate valve, 3-1/8” 5000psi 1 nos 6,500.00
7 Gate valve, 4-1/16” 5000psi 1 nos 7,500.00
Others
1 Hydraulic super choke assemble, hydraulic operated with pneumatic position indicator 31/16″ x 10000psi w.p type BX-154 flanged inlet and outlet. nos 44,000.00
2 Studded cross Studded cross (5 way) 41/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. nos 9,800.00
3 Studded cross 4 x 41/16″ x 10000psi w.p. nos 9,800.00
4 Studded cross 4 x 41/16″ x 10000psi w.p. nos 16,500.00
5 Flanged spool Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 1515.5mm nos 8,600.00
6 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 300mm nos 6,100.00
7 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded nos 1,800.00
8 41/16″ x 10000psi Blind flanged nos 1,600.00
9 DSA, 41/16″ 10000psi x 31/16″ x 10000psi nos 2,500.00
10 Ring gasket API BX-155 nos 70.00
11 Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 580.00
12 Ring gasket API BX-152 nos 20.00
13 Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 330.00
14 Ring gasket API BX-154 nos 40.00
15 Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 480.00
16 Needle valve, 1/2”NPT 10000psi, male x female nos 250.00
17 Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case nos 400.00
18 Fabricated skid base nos 9,000.00
19 Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. for landing subs with 6-5/8” API reg. Connections. nos 9,600.00
20 Drop-in type back pressure valve complete with landing sub, check valve & retrieving tool etc. 4-1/2” API IF connection shall be provided. nos 9,200.00
21 Cup Tester Mandrel Assembly constiting of Mandrel along with Sub & ‘O’ ring for 5-1/2″ with 2-3/8″ IF Connection nos 8,500.00
22 Studded cross (5 way) 31/16″ x 31/16″ x 41/16″ x 41/16″ x 21/16″ x 10000psi w.p. nos 8,940.00
23 Studded cross 4 x 41/16″ x 10000psi w.p. nos 8,940.00
24 Studded cross 3 x 41/16″ x 31/16″ x 10000psi w.p. nos 8,940.00
25 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 12” nos 6,210.00
26 Flanged spool 41/16″ x 41/16″ x 10000psi w.p. length 48.7” nos 5,100.00
27 21/16″ x 10000psi Flanged pressures Transmitter, with 2” LP and 1/2” NPT threaded nos 1,800.00
28 41/16″ x 10000psi Blind flanged nos 1,600.00
29 Ring gasket API BX-154 nos 50.00
30 Set of 8 studs with two nuts 1″ x 6.7″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 360.00
31 Ring gasket API BX-155 nos 70.00
32 Set of 8 studs with two nuts 11/8″ x 8″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 580.00
33 Ring gasket API BX-152 nos 20.00
34 Set of 8 studs with two nuts 3/4″ x 5.2″ ASTM A 193 G-B7 studs and ASTM A194 G-2H nuts nos 330.00
35 Lengthen flanged 31/16” x 10000psi. nos 1,200.00
36 Pressure gauge 0-10000psi w.p 1/2” NPT male. 41/2” O.D face ST/STL Case nos 400.00
37 Fabricated skid base nos 9,000.00
38 50mm (2″) WECO STYLE PLUG VALVE, C/W 1502 MALE/FEMALE ENDS HAMMER UNION ENDS, 10,000PSI CWP, NACE 4140 BODY MATERIAL nos 7,500.00
39 Diverter / Diverter line 21-1/4″ nominal dia , 2000 psi WP diverter spool with 2 nos. 10″side outlets and 10″ dia. hydraulic valve（压力等级我已改为2000 psi，因为标准中我们只有2000 psi没有200 psi） nos 158,000.00
40 13-5/8″, 5000 psi WP Drilling spool with 3-1/16” X 5M flange, with S.S. groove line. nos 55,800.00
41 Adaptor spool / Double studded adaptor of 11″ 5000psi X 13-5/8″-5000 psi with ring joint gasket with 3-1/16″x 5M flange outlet,26″ hight. nos 59,800.00
42 Adaptor spool / double studed adaptor .13-5/8″x 3M /13-5/8″x 5M nos 18,000.00
43 Spacer spool 21-1/4″,2M X 20-3/4″, 3M , 4ft long nos 86,800.00
44 3″ ID x 5000 psi 45 ft long coflex hose flame proof with hammer union end connection fig 1502 nos 15,600.00