Description
The Pacemaker Triplex Pump design has evolved over the years since it was first designed and manufactured. Significant changes were made towards a continuous design improvement. Listed below is a summary of the different types of design and corresponding features of each type.
Type I—this was the original design of the complete pump assembly. This is now obsolete.
Original design power end frame (a welded frame was utilized in the past)
Power end utilized a cast steel crankshaft
Original design of fluid end cylinder utilized line pipe threads on the gauge ports
Fluid End utilized a horizontal suction valve design
Original style packing utilized springs
Type II—this is an improved design that incorporates stronger components
Power end frame is made from high strength cast alloy steel
Power end utilizes a forged steel crankshaft
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid End utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
The same (STD) fluid end cylinder is utilized for fluid end assemblies with 3.5-in., 4.0-in., 4.5-in., and 5.0-in. plunger and packing assemblies
Fluid end assembly utilized hollow plungers
Type II will become Type V when the hollow plungers are replaced with solid plungers
Type III—this type was never released (top level drawings not made). This may have been reserved for a pump assembly with small (2.0-in., 2.5-in., and 3.0-in.) fluid ends.
Type IV—this is a pump assembly with large, valve-over-valve fluid ends
Power end assembly is the same as a Type II power end
Fluid end assembly utilizes a large (5.0-in., 5.5-in., and 6.0-in.) valve-over-valve fluid ends
Type V—this is a new (improved) design of a standard Pacemaker Pump Assembly
Pump assembly is not certified by any third party
Power end utilizes a forged steel crankshaft and is the same as a Type II power end
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid end utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
Fluid end assembly utilizes solid plungers
Type VI—this is a new (improved) design of a Third Party Certified Pacemaker Pump Assembly
Pump assembly is ABS/DNV/CE certified
Power end utilizes a forged steel crankshaft
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid end utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
The same (STD) fluid end cylinder is utilized for fluid end assemblies with 3.5-in., 4.0-in., 4.5-in., and 5.0-in. plunger and packing assemblies
Fluid end assembly utilizes solid plungers
Pressure retaining and load bearing parts utilize material certified to PED
Part Number or Drawing Number Description QTY
86839Pacemaker 3.5RH/CW Pump Assembly
L120270-5 PMP, FLUID END ASSY 3.5 LESS DISCH CONN 1
L114501RH-1PMP, PWR END RIGHT HAND 4.06 CW 1810
L11282012 PMP, DISCH CONN 2.0-1502 W/ BUSHING 1
L11282014 CONN ASSY, DISCH 2.0-1502 OPEN BORE 1
L600180-1 PMP, SHIPPING SKID 1
L114501RH-3 PMP, PWR END RIGHT HAND 4.06 CW 1880 1
L18-0007SWVL, 2.0-1502F S-50 FXPMP
86840Pacemake 4.5 LH/CW Pump Assembly
120270-7 PMP, FLUID END ASSY 4.500 STD FRAC & ACID 1
114501LH-2PMP, POWER END LEFT HAND 4.06 CW 1810
11282012 PMP, DISCHARGE CONN 2.0-1502 W/ BUSHING 1
11282014 CONNECTION ASSY, DISCH 2.0-1502 OPEN BORE 1
600180-1 PMP, SHIPPING SKID 1
114501LH-4PMP, POWER END LEFT HAND 4.06 CW 1880
1202703.5-5.0 Standard Pacemaker Pump Fluid End Assembly
112814 PMP, RAM WASH & PKG LUBE CVR ASSY 1
112519 PMP, DISCHARGE COVER STANDARD FLUID END 3
36627BJ-1 VALVE ASSY, DISCH PACEMAKER PMP 3
112821-1 MANIFOLD, SUCTION PMP STANDARD FLUID END 1
112505-1 PMP, SUCTION COVER CASTING F/STD FE SUCT CVR 3
36585BJ-1 PMP, SUCTION VALVE ASSY FOR CEMENT 60# SPRING 3
120269-1 PMP, FLUID END MACHINED 3.5-4.0 -4.5-5.0″ 1
21715 PMP, FLUID END ADAPTER ASSY 2.0 1502F 2
18-0007 SWIVEL, 2.0-1502F S-50 FXPMP 1
11282012 PMP, DISCHARGE CONN 2.0-1502 W/ BUSHING 1
136542-1 PMP, PLUNGER PACKING ASSY 3.5 HEADER RING CYLINDRICAL 3
136543-1PMP, PLUNGER PACKING ASSY 4.0 HEADER RING CYLINDRICAL
136544-1PMP, PLUNGER PACKING ASSY 4.5 HEADER RING CYLINDRICAL
136545-1PMP, PLUNGER PACKING ASSY 5.0 HEADER RING CYLINDRICAL
XAS-429-02 O-RING, 429 NITRILE 90 DURO 3
118408 SCREW, CP 12PT 1.500-6NC X 12.000 8Z 12
940584-59 SCREW, SHOULDER SOC 0.625 X .500NC X 1.25 S 2
X24380 SCREW, CP HEX .375-16NC X .500 S CAD G5 2
939349-3 WASHER, LOCK H/S .375 REG S ZINC 2
943631-70 PIN, DOWEL .750DIA X 2.000 ASA B5.20 2
32022 O-RING, 439 NITRILE 70 DURO 3
XAS-433-01 O-RING, 433 NITRILE 70 DURO 3
32027 O-RING, 435 NITRILE 70 DURO 3
120531-50 PMP, BKUP RING 5.505 X 5.020 TF LN 3
112814Pacemaker Pump RAM Wash & packing Lube Cover Assembly
57720 ELL, 90°, 1/4 NPT 150# MI 2
X10020TUBING, SQUARE, 3/4 X .120 WALL STEEL TUBING
002107PIPE, 3/4 SCH 40 A53
X10021TUBING, SQUARE, 1 X .120 WALL 1018
X10022STEEL, SHEET, 10 GA, H/R 1020
001018ANGEL, 1 1/4 X 1 1/4 X 3/16 A36
118316 FTG, HOSE BARB, 1/8 MPS STRATOFLEX 3
31090HOSE, AIR, 1/4 ARQP #2566-4
118317 FTG, HOSE BARB, 1/4 FJS STRATOFLEX 3
118318 ELBOW, 90°, 04MS-04FP BRASS 3
X3803 CAP, PIPE, 3/4 NPT STD 1
118321 PLUG, PIPE SQ. HD, 1/4 NPT MI STD 2
118322HINGE, CONT, 1/8 X 2W X 1/8 PIN S/S
118323 LINKS, CHAIN CAMBELL, COIL LINK CHAIN #2/0 3/16 STRAIGHT 2
118324 BOLT, SNAP, NORTH & JUDD 229 1/4 1
26060601TUBING, COPPER, 1/4″ (3/8″ O.D.) X .035W TYPE K
31187 ELL, 90° ST, 06MJ X 04MP 3
42909 ELL, 90° ST, 3/4 NPT 150# MI-BLK 1
118328 VALVE, GLOBE, 3/4 WALWORTH W58 1
57611 NUT, TUBING, 3/8 O.D. ARQP FG2875-6 OR EQUIVALENT 3
57610 FERRULE, 3/8 O.D. ARQP FF9605-6 OR EQUIVALENT 3
36627BJPacemaker Pump Discharge Valve Assembly
40496 DISCHARGE VALVE SEAT WITH O-RING 1
40497 DISCHARGE VALVE WITH INSERT 1
112818 SPRING, COMPRESSION (75 LB/INCH SPRING RATE) 1
120004SPRING, COMPRESSION (125 LB/INCH SPRING RATE)
36629BJ DISCHARGE VALVE INSERT BJ 1
XAS-240-01 O-RING AS568-240 NTRL 70 DURO BJ 1
36585BJPacemaker Pump Suction Valve Assembly
40111 VALVE, SUCTION WITH INSERT 1
40110 SEAT, SUCTION VALVE WITH O-RING AND BACK-UP RING 1
120145 SUCTION VALVE GUIDE 1
115376 SUCTION VALVE GUIDE INSERT 1
112856 SPRING, COMPRESSION (60 LB/INCH SPRING RATE) 1
112512SPRING, COMPRESSION (120 LB/INCH SPRING RATE)
115823 SUCTION VALVE SPRING RETAINER 1
118488 NUT, HEX LOCK 1/2-20NF S 22UTB1220 1
36583BHI SUCTION VALVE INSERT BHI 1
120531-30 BACK-UP RING, TEFLON, BHI 1
XAS-352-02 O-RING AS568-352 NTRL 90 DURO BHI 1
123496-2SUCTION VALVE PULLER BHI P/N: 123496-2
112821Suction Manifold Standard Fluid End Pacemaker Pump
43628-4FLANGE, BUTTERFLY VALVE 5″ BJ
112821-2CCASING, STEEL PER BHI MATERIAL SPEC. 20A27
21715Assembly Fluid End Adapter 2″-1502 Thread Half Pacemaker Pump
21714-1 ADAPTOR, PACEMAKER PUMP FLUID END 1
21713-1 NUT, LOCK PMP FLUID END ADAPTER 1
XAS-226-02 O-RING, 568-226-02 P/BJ SPEC 128199 1
21740 RNG, BACKUP 8-226 PARKER PARBAK 1
31069 SEAL 2″ 1502 NITRILE 1
112820Pacemaker Pump Discharge Connection Assembly
LXAS-342-02 ORING, 342 NITRILE 90 DURO 1
LX309769BJ BUSH, WELCH H-6448 .5 X 1 X 3.0 1
L49418 UNION SEAL, 2.0 602/1002/1502 NTRL 1
L45841-1 PMP, ADPT, DISCH 2.0-1502 FEM X PMP INTEG 1
L136443 PMP, DISCH CONN INTEG NUT X 2.0 -1502 FEM 1
136542Pacemaker Pump Plunger Packing Assembly 3-1/2″ Header Ring-Cylindrical Seal
129508 PMP, GLAND PKG 3.5″ CHEVRON 1
88998-1 PLUNGER, PUMP 3.5000 PMP SOLID HARDMETAL COATED 1
112880PMP, PLUNGER 3.5″ STN STL HRD MTL
120002 PMP, CROSSHEAD SEAL COVER ASSY 3.5″ 1
128692 PMP, SEAL RING 3.5″ F/5″ FLUID END 1
13654103 RING, SPACER 3.50″ PL PKG 1
120251 PMP, RING BACK 3.5″ SLC PACK 1
112595 PMP, GASKET CROSSHEAD SEAL COVE R 1
120531-55 PMP, BKUP RING 5.688 X 5.353 TF LN 1
120531-46 PMP, BKUP RING 5.500 X 5.283 TF LN 1
XAS-356-02 O-RING, 356 NITRILE 90 DURO 1
XAS-252-02 O-RING, 252 NITRILE 90 DURO 1
939657-12 WASHER, LOCK STAR .750 INT S 1
118376 STUD, 0.750NC X 4.000 B7 A193 TAP END 3
939207-7 NUT, HEX 0.750-10NC S ZINC G8 1
31564 PLUG, PIPE 0.250NPT SOC HD FS 1
118318 ELL, 90 04MS-04FP BRASS 1
12949503 SEAL, ROD 3.50 PRKR 25003500-375 1
X304374 VALVE, CHECK ASSY W/CAP W/O SINTERED FILTER & STRAINER 1
118469 SEAL, OIL NATIONAL 415437 1
13654903 SEAL, PRES RG 3.50 X 4.50 UTEX 1067-01-0082-19 2
13654803 RING, HEADER 3.500 X 4.500 PL P KG UTEX IND 0783-01-0082-00 1
136543Pacemaker Pump Plunger Packing Assembly 4.0 Header Ring-Cylindrical Seal
L129509 PMP, GLND PKG 4.0″ CHEVRON 1
L88998-2 PLNGR, PUMP 4.0 PMP SOLID HARDMETAL COATED 1
L112588 PMP, CROSSHD SEAL CVR 1
L128429 PMP, RING SEAL 4.0″ F/5.0″ FE 1
L13654104 RING, SPCR 4.00″ PL PKG 1
L120262 PMP, RING BACK 4.0″ SLC PACK 1
L112595 PMP, GASKET CROSSHD SEAL COVER 1
L120531-55 PMP, BKUP RING 5.688 X 5.353 TF LN 1
L120531-46 PMP, BKUP RING 5.500 X 5.283 TF LN 1
LXAS-356-02 ORING, 356 NITRILE 90 DURO 1
LXAS-252-02 ORING, 252 NITRILE 90 DURO 1
L31564 PLUG, PIPE 0.250NPT SOC HD FS 1
L118318 ELL, 90 04MS-04FP BRASS 1
L12949504 SEAL, ROD 4.00 PRKR 25004000-375 1
LX304374 VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR 1
L118465 SEAL, OIL NATL 417509 1
13654804 RING, PRESSURE UTEX P/N 1067-01-0103-81(HARD) 2
L13654804 RING, HDER 4.0 X 5.0 PL PKG 1
10312288ROD, ALL-THD 0.750-10NC X 3.50 A193 B7
L939207-7NUT, HEX 0.750-10NC S ZINC G8
L939657-12WASHER, LOCK STAR .750 INT S
136544Pacemaker Pump Plunger Packing Assembly 4.5 Header Ring-Cylindrical Seal
L129510 PMP, GLND PKG 4.5″ CHEVRON 1
L88998-3 PLNGR, PUMP 4.5 PMP SOLID HARDMETAL COATED 1
L112588 PMP, CROSSHD SEAL CVR 1
L120420 PMP, RING SEAL 4.5″ SLC CS 1
L13654105 RING, SPCR 4.50″ PL PKG 1
L120298 PMP, RING BACK 4.5″ SLC 1
L112595 PMP, GASKET CROSSHD SEAL COVER 1
L120531-45 PMP, BKUP RING 6.250 X 5.915 TF LN 1
L120531-46 PMP, BKUP RING 5.500 X 5.283 TF LN 1
LXAS-360-02 ORING, 360 NITRILE 90 DURO 1
LXAS-252-02 ORING, 252 NITRILE 90 DURO 1
L31584 PLUG, PIPE 0.250NPT SOC HD FS 1
L118318 ELL, 90 04MS-04FP BRASS 1
L12949505 SEAL, ROD 4.50 PRKR 25004500-375 1
LX304374 VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR 1
L118461 SEAL, OIL NATL 416154 1
L13654905 RING, PRESS 4.500 X 5.500 2
L13654805 RING, HDER 4.500 X 5.500 PL PKG 1
10312288ROD, ALL-THD 0.750-10NC X 3.50 A193 B7
L939207-7NUT, HEX 0.750-10NC S ZINC G8
L939657-12WASHER, LOCK STAR .750 INT S
136545Pacemaker Pump Plunger Packing Assembly 5.0 Header Ring-Cylindrical Seal
L129511 PMP, GLND PKG 5.0″ CHEVRON 1
L88998-4 PLNGR, PUMP 5.0 PMP SOLID HARDMETAL COATED 1
L112588 PMP, CROSSHD SEAL CVR 1
L120312 PMP, RING SEAL 5.0″ SFE 1
L13654106 RING, SPCR 5.00″ PL PKG 1
L120376 PMP, RING BACK 5.0″ SLC PACK SS 1
L112595 PMP, GASKET CROSSHD SEAL COVER 1
L120531-45 PMP, BKUP RING 6.250 X 5.915 TF LN 1
L120531-46 PMP, BKUP RING 5.500 X 5.283 TF LN 1
LXAS-360-02 ORING, 360 NITRILE 90 DURO 1
LXAS-252-02 ORING, 252 NITRILE 90 DURO 1
L31564 PLUG, PIPE 0.250NPT SOC HD FS 1
L118318 ELL, 90 04MS-04FP BRASS 1
L12949506 SEAL, ROD 5.00 PRKR 25005000-375 1
LX304374 VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR 1
L118468 SEAL, OIL NATL 415725 1
L13654906 RING, PRESS 5.0 X 6.0 2
L13654806 RING, HDER 5.0 X 6.0 PL P KG 1
10312288ROD, ALL-THD 0.750-10NC X 3.50 A193 B7
L939207-7NUT, HEX 0.750-10NC S ZINC G8
L939657-12WASHER, LOCK STAR .750 INT S
114501Pacemaker II Pump Power End Assembly
L118223 PMP, PWR FRAME CASTING-MACH 1
L112846 PMP, STROKE CNTR DRV ASSY 1
L112802 PMP, DRVLNE ADPT SPICER 1800 FLG 1
L118074PMP, DRVLNE ADPT SPICER 1880 1910 FLG
L112592 PMP, CROSSHD SLV 3
L112585 PMP, PINION GEAR CVR 1
L112557-3PMP, CRANKSHAFT ASSY “A” 3.13:1 RATIO
L112557-1 PMP, CRANKSHAFT ASSY “A” 4.06:1 RATIO 1
L112583 PMP, CNTR SHAFT-SNGL END 1
L118229 PMP, LUBE ASSY PWR END 1
L112580 PMP, CONROD & CROSSHD ASSY 3
L114529-1 CVR INSTL/ASSY, PWR END PMP(STD) 1
L112593 PMP, SPCR SET, CNTRSHAFT 2
L112586 PMP, CNTRSHAFT BRG 2
L112566 PMP, CNTRSHAFT BRG 2
L120061 PMP, OIL PAN II & IV 1
L112596 PMP, BOLT LOCKING FLUID END 2
L112854 PMP, GASKET OIL PAN 2
L112574 PMP, BRG CONNECTING ROD 3
L112801 PMP, BRG RTNR PIN 4
L112573 PMP, BRG INSERT CTR MAIN 2
L112575 PMP, BRG OUTER MAIN 2
L112584 PMP, PINION GEAR CVR 1
L112594 PMP, CNTRSHAFT WASHER 1
L112568-1 PMP, PINION GEAR-A 4.06:1, LEFT 1
L112568-2 PMP, PINION GEAR-A 4.06:1, RIGHT 1
L112570-1PMP, PINION GEAR “C” RATIO 3.13:1 LEFT
L112570-2PMP, PINION GEAR “C” RATIO 3.13:1 RIGHT
L112576 PMP, PINION GEAR CVR GASKET 2
L112587 PMP, CNTRSHAFT THRUST PLT 2
L50758-1 IND, SIGHT GLASS LUBE 2
L118331 SEAL, OIL GARLOCK 53X2798 1
L114595 PMP, CNTRSHAFT SEAL WASHER 1
L940251-4 PLUG, PIPE 0.500NPT SQ HD FS CI 2
LX5051 NIP, 0.125NPT X 3.0 SCH40 S 2
L941288-49 SCR, CP SOC .375-16NC X .750 NYLOK 16
L940251-5 PLUG, PIPE 0.750NPT SQ HD CI 1
LX22049 PIN, ROLL .250 DIA X .625 2
L26028506 SCR, CP HEX .375-16NCX0.75 S ZINC G5 4
L939349-3 WASHER, LOCK H/S .375 REG S ZINC 8
L939282-4 SCR, CP HEX .437-20NFX0.75 S ZINC G5 2
L939369-11 WASHER, FLAT .500 STD S ZINC 2
L939349-61 WASHER, LOCK H/S .437 REG S ZIN C 2
L118334 SCREEN, DRAIN PAUL MONROE FB-S- C16 4
L939282-2 SCR, CP HEX .312-24NF X .750 S ZINC G5 24
L939370-8 WASHER, FLAT .312 STD S ZINC 20
LX14305 WASHER, FNDR .312 ID X 1.50 OD S ZINC 4
LX14835 SEAL, HOLE HFMN A-S075 1
L57371 NUT, HEX LOCK 10-32 S ZINC G5 1
L56835 PLUG, PIPE 1.0NPT SQ HD CI 1
LX23859 PLUG, DRUM 2.0 MMC 8983T11 2
L118352 PMP, SCR CAP 12PT 11/2-6C-2AX5 12
L118333 BRTHR, AIR LHA DPS-40N06 .375 1
LX307069 NUT, HEX LOCK BEAR HUG BH-16 2
L118184 PMP, DRAIN SCREENMTG PLT 2
L118339 RING, QUAD MINN-RBR 14338 CO MP 1
L940237-8 CAP, SCRD 1.50 150# MI BLK 1
118223Cast Machine Drawing Pacemaker Pump Power End Frame
L118352 PMP, SCREW CAP 12PT 11/2-6C-2AX5 12
L118222 PMP, FRAME/GEAR COVER WELD ASSY 1
L112554 PMP, BEARING CAP-CENTER MAIN 2
L112553 PMP, BEARING CAP-OUTER MAIN 2
L943631-36 PIN, DIAMOND NOSE 0.500 CARR LANE CL-5-DP-Z 4
L943631-35 PIN, BULLET NOSE 0.500 CARR LANE CL4-BND 4
112846Stroke Counter Drive Assembly Pacemaker Pump
112848-1DRIVE SHAFT, STROKE COUNTER, PACEMAKER PUMP
112847-1CONNECTOR, STROKE COUNTER, PACEMAKER PUMP
X11150CAP, SPEEDOMETER CONNECTOR S-W 63121
939259-9NUT, HEX JAM, 1-14NF S G2
118301SEAL, FASTENER, 1″ PARKER STAT-O-SEAL
112557Crankshaft Assembly Pacemaker Pump
112558 CRANKSHAFT, POWER END, PACEMAKER PUMP 1
112811 KEY, CRANKSHAFT, PACEMAKER PUMP 2
939291-125 SCREW, CAP HEX HD, 1/2-20NF X 3 1/4 S G8 6
118488 NUT, HEX LOCK, 1/2-20NF S 22UTB1220 6
X3779 PLUG, PIPE SOC HD, 1 NPT FS 2
943732-74 PIN, ROLL 1/4 DIA X 1 LG 2
941309-183 SCREW, CAP SOCKET HD, 1/2-20NF X 3 1/2 LG 12
118416 THREAD-LOC LOCTITE #242 50ML OR EQUIVALENT 1
112559-1 GEAR, BULL LEFT HAND RATIO 4.06:1 1
112559-2 GEAR, BULL RIGHT HAND RATIO 4.06:1 1
112560-1GEAR, BULL LEFT HAND RATIO 3.55:1
112560-2GEAR, BULL RIGHT HAND RATIO 3.55:1
112561-1GEAR, BULL LEFT HAND RATIO 3.13:1
112561-2GEAR, BULL RIGHT HAND RATIO 3.13:1
112562-1GEAR, BULL LEFT HAND RATIO 2.64:1
112562-2GEAR, BULL RIGHT HAND RATIO 2.64:1
112563-1GEAR, BULL LEFT HAND RATIO 2.13:1
112563-2GEAR, BULL RIGHT HAND RATIO 2.13:1
112812WEIGHT, BALANCE PACEMAKER PUMP
112813WEIGHT, BALANCE PACEMAKER PUMP
112558RWCRANKSHAFT, POWER END, PACEMAKER PUMP(REWORKED)
112583Counter Shaft Pacemaker Pump
L505845 1/2 O.D. X 1/2 WALL 1020 SMLS
LX257214 3/4 O.D. 4130 ANNEALED
118229Lube Lines Power End Pacemaker Pump Tubing Installation/Assembly
L118343 ELL, 90 TBG PARKER 169HD-6-4 8
L118345 ELL, 90 TBG PARKER 169HD-5-4 3
L118470 ELL, 90 TBG PARKER 169HD-5-2 3
L118348 ELL, 90 TBG PARKER 169HD-3-2 2
L31466 ADAPTER, HEX NIPPLE 04MP-02MP STEEL 2
L31564 PLUG, PIPE .250NPT SOC HD FS 2
LX3779 PLUG, PIPE 1.000NPT SOC HD FS 1
L127922 PMP, LUBE LINE “A” 2
L127924 PMP, LUBE LINE “C” 4
L127929 PMP, LUBE LINE “D” 2
L326448-1 PMP, LUBE LINE “E” 1
112580Pacemaker Pump Connecting Rod and Crosshead Assembly
112599 CONNECTING ROD ASSY, PACEMAKER PUMP 1
112578 CROSSHEAD, PACEMAKER PUMP 1
112579 PIN, WRIST PACEMAKER PUMP 1
114538 BEARING, INSERT WRIST PIN, PACEMAKER PUMP 1
945251-98 SCREW, SET SOCKET, 5/8-18NF X 5/8 LG HFDP 1
939560-65 SCREW, SET SOCKET, 1/2-13NC X 1/2 LG HFDP 1
114520Cover Installation/Assembly Power End Pacemaker Pump (Standard/CE Certified)
135805 COVER ASSY, POWER END PMP 1
134080 LATCH ASSY, COVER PACEMAKER PUMP WELDED STANDARD 4
321817-1RETAINER, COVER LATCH PACEMAKER PUMP
194627 CAPSCREW, HEX SOC HD, 1/4-28 UNF X 3/8 IN 8
26007201 WASHER, LOCK H/S .250 REG S ZINC 8
Series 350 Cylindrical Seal PACEMAKER PUMP
D120270Fluid End Assembly
D112814 Ram Wash, Packing Lube & Cover Assy 1
C112519 Discharge Cover 3
D112820- Discharge Connection ASSY 2
D120177- Discharge Valve Assy 3
D112821 Suction Manifold 1
C112505 Suction Cover 3
D120178- Suction Valve ASSY 350 Series 3
A120531-50 Back-up Ring Teflon Solid 3
D120269 Fluid End-3 1/2″, 4″, 4 1/2″, 5″ 1
D129517 Plunger Packing, Assy 3 1/2″ SLC 3
D129518 Plunger Packing, Assy 4″ SLC 3
D129519 Plunger Packing, Assy 4 1/2″ SLC 3
D129520 Plunger Packing, Assy 5″ SLC 3
C128696 Plunger Packing Assy 3 1/2″ Style J842 Phenolic 3
C128754 Plunger Packing Assy 4″ Style J842 Phenolic 3
C128749 Plunger Packing Assy 4 1/2″ Style J842 Phenolic 3
D136544
D136545
D136542
D136543
C-21715ASSY, FLUID END ADAPTR 2″ THD HALF
C118408SCREW, CAP
H40584-59SCREW, SHOULDER-SOCKET HD
XAS-435-01O-RING PER BJ SPEC S128199
XAS-433-01O-RING PER BJ SPEC S128199
XAS-439-01O-RING PER BJ SPEC S128199
XAS-429-02O-RING PER BJ SPEC S128199
H43631-70PIN, DOWEL
H39349-3WASHER, LOCK
H39067-393SCREW, CAP
D132134Suction Valve Assembly
D132134-1 Suction Valve Assembly 1
D132134-2Suction Valve Assembly
D132134-3Suction Valve Assembly
D132134-4Suction Valve Assembly
D132134-5Suction Valve Assembly
D132134-6Suction Valve Assembly
A120500 Lock Nut 1
A118499 Lock Nut 1
XAS-352-02 O-Ring 1
A120531-30 Back Up Ring 1
120182-1 Valve Insert 1
120182-2Valve Insert
120182-3Valve Insert
B-115376 Guide Insert 1
C132125 Valve 1
A115823 Retainer 1
B120145 Guide 1
B132124 Valve Seat 1
B112856 Spring 1
A112512Spring
A120515Wrench, Open End
B120062Wrench
D120178Suction Valve Assembly
D120178-1 Suction Valve Assembly 1
D120178-2Suction Valve Assembly
D120178-3Suction Valve Assembly
D120178-4Suction Valve Assembly
D120178-5Suction Valve Assembly
D120178-6Suction Valve Assembly
A-120500 Lock Nut 1
A-118499 Lock Nut 1
XAS-352-02 O-Ring 1
A-120531-30 Back Up Ring 1
B-120210-1 Valve Insert 1
B-120210-2Valve Insert
B-120210-3Valve Insert
B-115376 Guide Insert 1
B-120214 Valve 1
A-115823 Retainer 1
B-120145 Guide 1
B-120170 Valve Seat 1
B-112856 Spring 1
B-112512Spring
D120178Discharge Valve Assembly
D120177-1 Discharge Valve Assembly 1
D120177-2Discharge Valve Assembly
D120177-3Discharge Valve Assembly
D120177-4Discharge Valve Assembly
D120177-5Discharge Valve Assembly
D120177-6Discharge Valve Assembly
A-120500 Locknut 1
XAS-240-01 O-Ring 1
A-120181 Valve 1
C-132193Valve Seat
C-120182-1 Valve Insert 1
C-120182-2Valve Insert
C-120182-3Valve Insert
A-112818 Spring 1
A-120004 Spring 1
A-118004 Spring Retainer 1
A-120515Required Tool
B112866Discharge Valve Seat Puller
D-112820Discharge Connection
B-112539 DISCH, CONN, NUT 1
B-114528Retaining Ring
C-112819DISCH, CONN
C-112861DISCH, CONN
C-120368DISCH, CONN
C-134117DISCH, CONN
C-120331DISCH, CONN
D-136443DISCH, CONN
A-126794Swivel Joint
41997Swivel Joint
A-118473
A-118426
XAS-342-02
D-112820-1DISCH, CONN
D-112820-2DISCH, CONN
D-112820-3DISCH, CONN
D-112820-4DISCH, CONN
D-112820-5DISCH, CONN
D-112820-6DISCH, CONN
D-112820-7DISCH, CONN
D-112820-8DISCH, CONN
D-112820-9DISCH, CONN
D-112820-10DISCH, CONN
D-112820-11DISCH, CONN
D-112820-12DISCH, CONN
D-112820-13DISCH, CONN
D-1295173 1/2″ Plunger Packing SPRING LOADED
D129508 GLAND, PACKING 1
C118173PLUNGER, HARD METAL COATED
C112880PLUNGER, STAINLESS HD. METAL COATED
C120002COVER ASSY, CROSSHEAD SEAL
B128602RING, SEAL
B120252RING, FRONT
B120251RING, BACK
B112595GASKET, CROSSHEAD COVER
A120531-55RING, BACK-UP
A120531-46RING, BACK-UP
XAS-354-02O-Ring PER BJ SPEC. S128199
XAS-252-02O-Ring PER BJ SPEC. S128199
H39657-12LOCK WASHER SHAKE PROOF INTERNAL
A118376STUD
H39207-7NUT, HEX
H40977-3PLUG, PIPE
A118318EBLOW
S129495-03SEAL, ROD
A118371VALVE
A118467SEAL, OIL
5131137-03SEAL, PRESS RING
5129496-03SEAL, PRESS RING
A118298SPRING, COMPRESSION
B120329SPANNER WRENCH
C112830TEE WRENCH
C120402-4PLUNGER PACKING LOADING AND REMOVAL TOOL ASSY
D114536-13PLUNGER PACKING DRIVER ASSY
D-1295173 1/2″ Plunger Packing HEADER RING
D129508 GLAND, PACKING 1
A120531-46RING, BACK-UP
A120531-55RING, BACK-UP
B112595GASKET, CROSSHEAD COVER
B120251RING, BACK
C120002
XAS-356-02O-RING
XAS-252-02O-RING
939657-12LOCK WASHER
118376STUD
939207-7NUT, HEX
940977-3PLUG, PIPE
118318ELBOW
12949503SEAL, ROD
118371VALVE, LINE
118469SEAL, OIL
13655003PRESS RINGS
13654903PRESS RINGS
13654803HEADER RING
B120329SPANNER WRENCH
C112830TEE WRENCH
C120002-4PLUNGER PACKING LOADING AND REMOVAL TOOL ASSY
D114536-13PLUNGER PACKING DRIVER ASSY
D-1295184″ Plunger Packing SPRING LOADED
D129509 GLAND, PACKING 1
C112881
C112588
B112538
B112528
B128429
B120261
B120262
B112595
A120531-55
A120531-46
Old Style Pump
C-115832-1Old Style Suction Valve Assembly
Available Mud Pump Models:
Gardner Denver 4″x5″ FF FXF Duplex Mud Pump 1FXF172
Gardner Denver 4.5″x5″ FF FXFM Duplex Mud Pump
Gardner Denver 4.5″x6″ FG FXG Duplex Mud Pump
Gardner Denver 5″x5″ FF AXFZ Duplex Mud Pump
Gardner Denver 5″x6″ FG FXG Duplex Mud Pump 1FXG172
Gardner Denver 5″x8″ FC FXX HIGH PRESSURE Duplex Mud Pump
Gardner Denver 5″x8″ FD FXX Duplex Mud Pump
Gardner Denver 5″x10″ FC FXD HIGH PRESSURE Duplex Mud Pump
Gardner Denver 5″x10″ FC FXO Duplex Mud Pump
Gardner Denver 5″x10″ FD FXD Duplex Mud Pump
Gardner Denver 5.5″x8″ FD FXX Duplex Mud Pump
Gardner Denver 5.5″x10″ FD FXD Duplex Mud Pump
Gardner Denver 6″x8″ FD FXX MODIFIED Duplex Mud Pump
Gardner Denver 6″x10″ FD FXD MODIFIED Duplex Mud Pump
Gardner Denver 7.25″x10″ FO FXO Duplex Mud Pump
Gardner Denver 7.25″x12″ FZ FXZ Duplex Mud Pump
Gardner Denver 7.25″x14″ FK FXK Duplex Mud Pump
Gardner Denver 7.25″x14″ FXN Duplex Mud Pump
Gardner Denver 7.5″x8″ FY FXX Duplex Mud Pump
Gardner Denver 7.5″x10″ FY FXD Duplex Mud Pump
Bomco: F-500, F-800/1000, F-1300/1600, F-1600HL, F-2200HL
HONGHUA: HHF-500, HHF-800, HHF-1000, HHF-1300, HHF-1600, HHF-1600HL, HHF-2200HL, 3NB-1300/1600F, 3NB-1600HL
Rongsheng: RS-F500, RS-F800/1000, RS-F1300/1600
Loadmaster: LSF-500, LSF-800, LSF-1000, LSF-1300, LSF-1600
RG: F-500, F-800, F-1000, F-1300, F-1600
Emsco: F-350, F-500, F-650, F-800, F-1000, FD-1000, FB-1300, FB-1600, FA-1600, FA-1300, FC-1600, FD-1600, FC-2200D-300/500
National: 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220, JWS-165-L, JWS-340, JWS-400
Oilwell: 350-PT, A-650P-T, A-850-PT, A-1100-PT, A-1400-PT, A-1700-PT
Ideco: T-500, T-800, T-1000, T-1300, T-1600, MM-450, MM-500-F, MM-600-A, MM-700-F, MM-1000
Gardner Denver: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11TGE, TGF, TGH, PAH-275
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
WEATHERFORD/Ellis Williams: MP-5, MP-8, MP-10, MP-13, MP-16, E-447, E-2200, W446, W440
Drillmec: 7TS-600, 8T-800, 9T1000, 10T-1300, 12T1600, 14T-2200
Upetrom: 3PN-1000, 3PN-1600, 3PN-1300, 3PN-2000
OPI: 30-D, 350-GD, 500-DC, 700-HDL, 1000-HDL
Lewco/Ewco: W-250-C, WH440, W446, W600, WH600, WH770, W1100, WH1312, W1612, W1712, W2000, W2214, W2215
American Block: K800, K1000, K1300, K1600, K2200
Soilmec: 7T500, 7T508, 8T650
TFI: BH-800, F-500, F-800, F-1000, F-1300, F-1600
TSC: WF-400, WF-450, WF-700, WFU-750, WF-1000, WF-1300, WF-1600, WF-2000, WF-2200
Whatsapp: +86 15315008951
