AOT MG (100 TON) BOTTLENECK ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E30157 2 3/8” – 3 1/2” 1 3/4” – 2 3/4” 308-296
REPLACEMENT PARTS FOR MG ELEVATORS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E26813 1 HINGE PIN * 1 4.85
E11763 2 LATCH 1 9.25
E26814 3 LATCH PIN * 1 .50
E11766 4 LATCH SPRING 2 1 .25
E11581 5 LATCH CAM 1 1 .75
E11764 6 LATCH LOCK * 1 3.00
E11759 7 LATCH LOCK PIN 1 1 .75
E12529 8 DOOR LUG PIN 1 .25
E8156 9 LATCH PIN RETAINER 1 1 .25
E26817 10 LINK BLOCK 2 3.50
E8151 11 UPPER LINK BLOCK BOLT, NUT, & COT, 2 .45
E8145-2 12 LOWER LINK BLOCK BOLT & NUT, & COT. 2 2 .75
E939672-18 13 COTTER PIN 2 3 .10
E940308-1 14 GREASE FITTING 1 .10
E940308-8 15 GREASE FITTING 1 .10
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT RG (150 TON) BOTTLENECK ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E30156 2 3/8” – 3 1/2” 1 3/4” – 2 3/4” 308-296
REPLACEMENT PARTS FOR RG ELEVATORS
AOT# ITEM # DESCRIPTION SPARES # REQ. WT.
E23569 1 HINGE PIN * 1 8.13
E23543 2 LATCH 1 1 33.00
E23544 3 LATCH PIN * 1 3.90
E23546 4 LATCH SPRING 2 1 .75
E23548 5 LATCH SPRING STOP 1 1 .88
E23729 6 LATCH LOCK * 1 4.00
E23553 7 LATCH LOCK BOLT 1 1 1.13
E939484-8 8 LATCH LOCK BOLT NUT 1 1 .20
E13188 9 LATCH LOCK SPRING 2 1 .30
E23547 10 DOOR LUG PIN 1 .25
E8156 11 LATCH PIN RETAINER 2 1 .25
E9519 12 LINK BLOCK 2 5.50
E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 2 .50
E8145-2 12 LOWER LINK BLOCK BOLT & NUT & COT. 2 2 .75
E939672-18 13 COTTER PIN 3 .10
E940308-1 14 GREASE FITTING 1 .10
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT MGG (250 TON) BOTTLENECK ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E35005 3 1/2” – 5 1/2” 2 1/4” – 3 1/2” 600.00
REPLACEMENT PARTS FOR MGG ELEVATORS
AOT# ITEM # DESCRIPTION SPARES # REQ. WT.
E34908 1 HINGE PIN * 1 15.50
E34906 2 LATCH 1 57.00
E34907 3 LATCH PIN * 1 7.31
E34909 4 LATCH SPRING 2 1 2.50
E13185 5 LATCH SPRING STOP 1 1 .94
E13152 6 LATCH LOCK * 1 4.00
E15101 7 LATCH LOCK BOLT 2 1 1.30
E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20
E13188 9 LATCH LOCK SPRING 2 1 .30
E13190 10 DOOR LUG PIN 1 .32
E34911 11 LATCH PIN RETAINER 2 1 .13
E12732 n/p DOOR CATCH ARM 1 1.50
E12916 n/p DOOR CATCH ARM PIN 1 .13
E9561 n/p DOOR CATCH SPRING * 1 .13
E12734 n/p ROLLER 1 .50
E12735 n/p ROLLER PIN 1 .25
E9519 12 LINK BLOCK 2 5.50
E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50
E8145-2 14 LOWER LINK BLOCK BOLT & NUT 2 2 .75
E939672-19 15 COTTER PIN 3 .06
E940308-1 16 GREASE FITTING 1 .10
E34910 17 HINGE PIN RETAINER 1 .19
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT GG (350 TON) BOTTLENECK ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E31068 3 1/2” – 5 1/2” 2 1/4” – 3 1/2” 715.00
REPLACEMENT PARTS FOR GG ELEVATORS
AOT# ITEM # DESCRIPTION SPARES # REQ. WT.
E33998 1 HINGE PIN * 1 18.38
E31071 2 LATCH 1 50.00
E33999 3 LATCH PIN * 1 10.38
E18416 4 LATCH SPRING 2 1 2.25
E13185 5 LATCH SPRING STOP 2 1 .94
E13152 6 LATCH LOCK * 1 4.00
E15101 7 LATCH LOCK BOLT 2 1 1.30
E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20
E13188 9 LATCH LOCK SPRING 2 1 .30
E13190 10 DOOR LUG PIN 1 .32
E32892 11 LATCH PIN RETAINER 2 1 .04
E12732 n/p DOOR CATCH ARM 1 1.50
E12916 n/p DOOR CATCH ARM PIN 1 .13
E9561 n/p DOOR CATCH SPRING * 1 .13
E12734 n/p ROLLER 1 .50
E12735 n/p ROLLER PIN 1 .25
E9519 12 LINK BLOCK 2 5.50
E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50
E8145-2 14 LINK BLOCK BOLT & NUT 2 2 .75
E939672-19 15 COTTER PIN 3 .06
E940308-1 16 GREASE FITTING 1 .10
E31074 11 HINGE PIN RETAINER * 1 .50
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT HGG (350 TON) BOTTLENECK ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E70013 4” – 6 5/8” 4” – 6 5/8” 715.00
AOT# ITEM # DESCRIPTION SPARES # REQ. WT.
E30553 1 HINGE PIN * 1 18.38
E30460 2 LATCH 1 50.00
E30613 3 LATCH PIN * 1 10.38
E31228 4 LATCH SPRING 2 1 2.25
E31215 5 LATCH SPRING STOP 2 1 .94
E13152-1 6 LATCH LOCK * 1 4.00
E31138 7 LATCH LOCK BOLT 2 1 1.30
E939484-8 8 LATCH LOCK BOLT NUT 2 1 .20
E13188 9 LATCH LOCK SPRING 2 1 .30
E31216 10 DOOR LUG PIN 1 .32
E32892 11 LATCH PIN RETAINER 2 1 .04
E12732 n/p DOOR CATCH ARM 1 1.50
E12916 n/p DOOR CATCH ARM PIN 1 .13
E9561 n/p DOOR CATCH SPRING * 1 .13
E12734 n/p ROLLER 1 .50
E12735 n/p ROLLER PIN 1 .25
E30492 12 LINK BLOCK 2 5.50
E8151 13 UPPER LINK BLOCK BOLT, NUT & COT. 2 .50
E8145-2 14 LINK BLOCK BOLT & NUT 2 2 .75
E939672-19 15 COTTER PIN 3 .06
E940308-1 16 GREASE FITTING 1 .10
E30609 11 HINGE PIN RETAINER * 1 .50
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT TA-65 (65 TON) & TA-100 (100 TON) CENTER LATCH ELEVATORS
AOT# RANGE DESCRIPTION SIZE OF LINKS WT.
E32385 1.660 – 2 7/8” TA-65 C. L. ELEVATOR 1 3/4” – 2 3/4” 65.00
E32386 3 1/2” – 4 1/2” TA-65 C. L. ELEVATOR 1 3/4” – 2 3/4” 83.00
E32383 2 3/8” – 2 7/8” TA-100 C. L. ELEVATOR 1 3/4” – 2 3/4” 119.00
E32384 3 1/2” – 4 1/2” TA-100 C丄.ELEVATOR 1 3/4” – 2 3/4” 158.00
REPLACEMENT PARTS FOR TA-65 & TA-100 ELEVATORS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E32916 3 HINGE PIN (FRAME 32385) 1 5.00
E32915 3 HINGE PIN (FRAME 32386 & 32383) 1 6.00
E32919 3 HINGE PIN (FRAME 32384) 1 3.00
E32380 4 LATCH 1 5.50
E32424-3 5 LATCH PIN (FRAME 32385) 1 1 .75
E50713 5 LATCH PIN (FRAME 32386 & 32383) 1 1 1.00
E32424-1 5 LATCH PIN (FRAME 32384) 1 1 1.13
E32470 6 LATCH SPRING 2 1 .19
E32381-1 7 LATCH LOCK 1 2.75
E36208 8 LATCH LOCK PIN 2 1 .25
E32469 9 LATCH LOCK SPRING 2 1 .19
E32382 N/P LATCH LOCK ASSY. 1 8.69
E32892 10 HINGE PIN RETAINER (FRAME 32385, 32386 & 32383) 1 .04
E32920 10 HINGE PIN RETAINER 1 .06
E32430 11 LINK BLOCK 2 2.19
E29359 12 USE P/N E939099-65 2 .25
E939099-65 13 UPPER & LOWER LINK BLOCK BOLT, NUT & COTTTER 2 2 .40
E939484-7 14 LINK BLOCK NUT 2 2 .10
E939672-19 15 COTTER PIN 2 2 .06
E940308-1 16 GREASE FITTING 2 .10
E944048-15 17 EXPANSION PLUG (FRAME 32385) 1 .70
E944048-16 17 EXPANSION PLUG (FRAME 32386 & 32384) 1 .70
E944048-19 17 EXPANSION PLUG (FRAME 32383) 1 .70
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN
AOT MAA (175 TON) CENTER LATCH ELEVATOR
AOT# RANGE SIZE OF LINKS WT.
E12526 2 3/8，，- 3 1/2” 2 1/4”-3 1/2” 88.00
REPLACEMENT PARTS FOR MAA ELEVATORS
AOT # ITEM # DESCRIPTION **SPARES # REQ. WT.
E12704 1 HINGE PIN 1 5.00
E11763 2 LATCH 1 9.25
E11758 3 LATCH PIN 1 2.13
E11766 4 LATCH SPRING 2 1 .50
E11581 5 LATCH CAM 1 1 1.00
E11764 6 LATCH LOCK 1 3.00
E11759 7 LATCH LOCK PIN 2 1 .57
E12529 8 DOOR LUG PIN 1 .19
E8156 9 LATCH RETAINER PIN 2 1 .06
E9519 10 LINK BLOCK 2 5.50
E8151 11 UPPER LINK BLOCK BOLT, NUT , & COTTER 2 2 .50
E8145-2 12 LINK BLOCK BOLT 2 2 .80
E8150 N/P LINK BLOCK NUT 2 2 .39
E9519-1 N/P LINK BLOCK ASSY. 2 7.00
E8145-2 N/P LINK BLOCK BOLT ASSY. 2 1.19
E939672-18 13 COTTER PIN 2 2 .10
E940308-1 14 GREASE FITTING 1 .10
E940308-8 15 GREASE FITTING 1 .10
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN
AOT MRA (150 TON) SQUARE SHOULDER ELEVATOR
AOT # RANGE SIZE OF LINKS WT.
E30158 2 3/8” – 5” 1 3/4” – 2 3/4” 210-185
REPLACEMENT PARTS FOR MRA ELEVATORS
AOT # ITEM # DESCRIPTION ^”SPARES # REQ. WT.
E26813 1 HINGE PIN * 1 4.85
E11763 2 LATCH 1 9.25
E26814 3 LATCH PIN * 1 .50
E11766 4 LATCH SPRING 2 1 .25
E11581 5 LATCH CAM 1 1 .75
E11764 6 LATCH LOCK * 1 3.00
E11759 7 LATCH LOCK PIN 1 1 .75
E12529 8 DOOR LUG PIN 1 .25
E8156 9 LATCH PIN RETAINER 1 1 .25
E26817 10 LINK BLOCK 2 3.50
E8031 11 LINK BLOCK PIN 2 .45
E8145-2 12 LINK BLOCK BOLT, & NUT & 2 2 .75
E939672-18 13 COTTER PIN 2 3 .10
E940308-1 14 GREASE FITTING 1 .10
E940308-8 15 GREASE FITTING 1 .10
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * ^ THESE ITEMS
AOT SINGLE JOINT ELEVATORS
AOT# RANGE WT.
E39-039 2 3/8” – 5 1/2” 51.00
E39-200 2 3/8” – 3 1/2” 63.00
E39-210 4” – 5 3/4” 63.00
E39-040 5 3/4” – 7 5/8” 69.00
E39-041 8” – 10 3/4” 98.00
E39-042 11 3/4” – 13 3/8” 130.00
E39-043 14” – 20” 213.00
REPLACEMENT PARTS FOR SINGLE JOINT ELEVATORS
AOT # ITEM # DESCRIPTION **SPARES # REQ. WT.
E39-034 1 2 3/8” – 20” LATCH SPRING 2 1 .08
E39-035 2 2 3/8” – 13 3/8” LATCH 1 5.50
E39-050 3 2 3/8” – 20” LATCH PIN 1 .35
E39-051 4 2 3/8” – 20” LATCH RET PIN ASSY. 1 1 .65
E39-052 5 2 3/8” – 13 3/8” HINGE PIN 1 .75
E39-054 2 14” – 20” LATCH 1 7.00
E39-053 5 14” – 20” HINGE PIN 1 1.00
E39-055 6 2 3/8” – 20” HINGE PIN RETAINING PIN 1 .08
E34568 N/P SWIVEL SUSPENSION ASSEMBLY 1 19.00
AOT SLX – 65 TON SIDE DOOR ELEVATOR
AOT# RANGE WT.
E38-045 3 1/2” – 5 1/2” 160.00
E38-067 5 3/4” – 8 5/8” 190.00
E38-809 9” – 10 3/4” 218.00
E38-137 11” – 14 1/4” 275.00
© 0 0
REPLACEMENT PARTS FOR SLX- 65 ELEVATORS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E33812 1 LATCH LOCK (3 1/2” – 5 1/2”） 1 3.38
E33813 2 LATCH (3 1/2” – 5 1/2”） 1 3.44
E33816 3 LATCH LOCK SPRING (3 1/2” – 5 1/2”） 2 1 .25
E34612 4 HINGE PIN (3 1/2” – 8 5/8”） 1 2.00
E29980-3 5 LATCH PIN (3 1/2” – 5 1/2”） 1 .83
E29980-3 9 LATCH LOCK PIN (3 1/2” – 5 1/2”） 1 .83
E33818 6 LATCH SPRING (3 1/2” – 5 1/2”） 2 1 .19
E33817 7 ROLLER 1 .25
E31584 8 ROLLER PIN 1 .10
E34X6 10 LINK BLOCK BOLT (3 1/2” – 5 1/2”） 2 2 .75
E53201 11 GREASE FITTING 2 .10
E31332 1 LATCH LOCK (5 3/4” – 14 1/4”） 1 3.50
E31331 2 LATCH (5 3/4” – 14 1/4”） 1 4.50
E34611 4 HINGE PIN (9 5/8” – 14 1/4”） 1 2.00
E32424-3 5 LATCH PIN (5 3/4” – 14 1/4”） 1 .83
E29980-4 9 LATCH LOCK PIN (5 3/4” – 14 1/4”） 1 .50
E31383 6 LATCH SPRING (5 3/4” – 14 1/4”） 2 1 .45
E31404 3 LATCH LOCK SPRING ( 5 3/4” – 14 1/4”） 2 1 .19
E34X7 10 LINK BLOCK BOLT (5 3/4”-14 1/4”） 2 2 1.00
E34614 12 HINGE PIN RETAINER 1 .06
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT SLX – 150 (150 TON) SIDE DOOR ELEVATORS
AOT# RANGE WT.
E31239 5 1/2” – 8 5/8” 300.00
E33950 9 5/8” – 10 3/4” 420.00
E33982 11 3/4” – 13 3/8” 475.00
E33632 16” – 20” 720.00
REPLACEMENT PARTS FOR SLX-150 ELEVATORS
AOT # ITEM # DESCRIPTION **SPARES # REQ. WT.
E34611 3 HINGE PIN ( 5 1/2” – 8 5/8”） 1 4.44
E33953 3 HINGE PIN ( 9 5/8” – 10 3/4”） 1 6.25
E33985 3 HINGE PIN ( 11 3/4” – 13 3/8”） 1 8.50
E33646 3 HINGE PIN (16” – 20”） 1 10.00
E31331 4 LATCH (5 1/2” – 13 3/8”） 1 4.50
E33634 4 LATCH ( 16” – 20”） 1 6.00
E32424-3 5 LATCH PIN (5 1/2” – 13 3/8”） 1 1 .75
E33645 5 LATCH PIN (16” – 20”） 1 1 2.00
E31383 6 LATCH SPRING (5 1/2” – 13 3/8”） 2 1 .44
E33657 6 LATCH SPRING (16” – 20”） 2 1 .50
E31332 7 LATCH LOCK (5 1/2” – 13 3/8”） 1 3.50
E33635 7 LATCH LOCK (16” – 20”） 1 5.00
E29980-4 8 LATCH LOCK PIN (5 1/2” – 13 3/8”） 1 1 .50
E50713 8 LATCH LOCK PIN (16” – 20”） 1 1 1.00
E31404 9 LATCH LOCK SPRING (5 1/2” – 13 3/8”） 2 1 .19
E33658 9 LATCH LOCK SPRING (16” – 20”） 2 1 .50
E31407 10 ROLLER 1 .38
E31584 11 ROLLER PIN 1 .13
E34614 12 HINGE PIN RETAINER (5 1/2” – 8 5/8”） 1 .06
E32918 12 HINGE PIN RETAINER (9 5/8” – 10 3/4”） 1 .06
E32892 12 HINGE PIN RETAINER (11 3 /4” – 20”） 1 .04
E9519 13 LINK BLOCK 2 5.50
E8151 14 LINK BLOCK PIN 2 2 .50
E8145 15 LINK BLOCK BOLT 2 2 .50
E8150 16 LINK BLOCK NUT 2 2 .13
E939672-20 17 COTTER PIN 2 2 .06
E940308-1 18 GREASE FITTING .10
L ACCESS
AOT 3-1/2” “TS-100” MANUAL TUBING SPIDER
The 3-1/2” TS-100 tubing spider and slip assembly can handle
tubing sizes 3/4” thru 3-1/2” O.D. by changing 9 removable
inserts. The spider and slip are made of alloy steel and heat
treated for strength. All come with full certification and data
books are available upon request.
AOT# ITEM # DESCRIPTION REF# *SPARES # REQ.
17-300 3-1/2” SPIDER COMPLETE LESS INSERTS N/A 1
17-301 SLIP ASSY. LESS INSERTS 7502-104 1
17-302 3-1/2” TS-100 BOWL ONLY 7502-100 1
17-101 3 RIGHT HAND SEGMENT 7502-C-217 1
17-102 4 CENTER SEGMENT 7502-B-217 1
17-103 5 LEFT HAND SEGMENT 7502-A-217 1
17-104 6 LATCH HANDLE 7502-A-214 1
17-105 LATCH 7502-A-207 1
17-108 8 LATCH PIN W/COTTER 7502-B-207 2 1
17-109 9 LATCH SPRING 7502-C-207 2 1
17-110 10 HINGE PIN F/SLIP W/COTTER 7502-A-216 2
17-111 11 LINE KEEPER W/COTTER 7502-B-216 6 3
17-112 12 HINGE PIN F/BOWL 7502-A-202 1
17-113 13 LOCK PIN W/BAIL & CHAIN 7502-D-203 1
17-114 14 SNAP RING 7502-103-X 1 1
* RECOMMENDED SPARE PARTS F/1 YEAR OPERATION
INSERTS FOR 3-1/2” “TS-100” SPIDER
AOT# DESCRIPTION REF# # REQ.
21-101 3-1/2” X 3-1/2” 7502-A-5069 9
21-110 3-1/2” X 3-3/8” N/A 9
21-102 3-1/2” X 3-1/8” N/A 9
21-103 3-1/2” X 2-7/8” 7502-A-5070 9
21-104 3-1/2” X 2-3/8” 7502-A-5071 9
21-105 3-1/2” X 2-1/16” 7502-A-5072 9
21-111 3-1/2” X 2” N/A 9
21-106 3-1/2” X 1-1/2” 7502-A-5074 9
21-107 3-1/2” X 1-1/4” 7502-A-5075 9
21-108 3-1/2” X 1” 7502-A-5076 9
21-109 3-1/2” X 3/4” 7502-A-5077 9
AOT 4-1/2” & 5-1/2” “TS-100” MANUAL SPIDER
The 4-1/2” spider and slip uses the 4-1/2” “DU” rotary slip
insert and has a range of 1.660” thru 4-1/2” O.D. by changing
the 12 inserts. The 5-1/2” spider and slip uses the 5-1/2” “D”U
rotary slip insert and has a range of 2-7/8” thru 5-1/2” O.D. by
changing the 12 inserts. The 5-1/2” spider is specifically
designed to run the Reda or Kobe cable. Both spiders and slip
assemblies are designed for heavy duty use. Both are made of
alloy steel and heat treated for strength and wear resistance.
Both spiders are rated for 100 ton capacity.
COMPLETE SPIDER ASSEMBLIES
AOT# DESCRIPTION # REQ. WT.
18-450 4-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS 1 249.0
18-550 5-1/2” TS-100 SPIDER COMPLETE W/SLIPS LESS INSERTS 1 303.0
REPLACEMENT PARTS FOR 4-1/2” & 5-1/2” “TS-100” SPIDER
AOT# ITEM# DESCRIPTION *SPARES # REQ. WT.
18-451 1 4-1/2” BOWL ONLY 1 155.0
18-452 2 4-1/2” SLIP ASSY. COMPLETE LESS INSERTS 1 60.0
18-453 3 4-1/2” SLIP HANDLES ONLY (SET) 1 20.0
18-454 4 4-1/2” SLIP SEGMENTS EACH 1 6.80
18-457 7 4-1/2” HINGE PIN 1 3.50
18-458 8 4-1/2” REMOVEABLE HINGE PIN 1 3.75
18-455 5 4-1/2” & 5-1/2” INSERT RETAINER PIN 12 1 .20
18-456 6 4-1/2” & 5-1/2” SEGMENT RETAINER PIN 6 1 .25
18-551 1 5-1/2” BOWL ONLY 1 213.0
18-552 2 5-1/2” SLIP ASSY. COMPLETE LESS INSERTS 1 70.0
18-553 3 5-1/2” SLIP HANDLES ONLY (SET) 1 21.0
18-554 4 5-1/2” SLIP SEGMENTS EACH 2 8.00
18-557 7 5-1/2” HINGE PIN 3 4.00
18-558 8 5-1/2” REMOVABLE HINGE PIN 1 4.25
PSR 1.625_1 5/8″ EXTERNAL SNAP RING
RECOMMENDED SPARE PARTS F/1 YEAR OPERATION
INSERTS FOR 4-1/2” – 5-1/2” SPIDER ON PAGE 4
AOT 8-5/8” “API” BOWL
The AOT API BOWL has the same bore and taper (4” per ft.)
as the API #3 split bowl. All API drill collar, drill pipe & casing
slips can be used in this bowl. It has a range of 2-1/16” thru
10” F.J. and is rated for 100 tons.
AOT# DESCRIPTION # REQ. WT.
17-850 8-5/8” API BOWL 1 600.0
17-851 REMOVABLE HINGE PIN W/CHAIN 2 8.0
AOT 200 TON HINGED CASING SPIDERS
AOT# DESCRIPTION WT.
30-303 30” 200 TON HINGED CASING SPIDER 2200.00
30-203 20” 200 TON HINGED CASING SPIDER 1625.00
30-133 13-3/8” 200 TON HINGED CASING SPIDER 950.00
NOTE: AOT “CMS-3” SLIPS FIT & BAASH ROSS® UC-3 SLIPS FIT ABOVE SPIDERS
REDUCING BUSHINGS FOR 200 TON HINGED CASING SPIDERS
AOT# DESCRIPTION WT.
30-326 30” X 26” REDUCING BUSHING 610.00
30-324 30” X 24” REDUCING BUSHING 755.00
30-320 30” X 20” REDUCING BUSHING 905.00
30-216 20” X 16” REDUCING BUSHING 395.00
30-213 20” X13-3/8” REDUCING BUSHING 480.00
30-190 20” X 10-3/4” REDUCING BUSHING 525.00
30-195 13-3/8” X 10-3/4” REDUCING BUSHING 165.00
30-188 13-3/8” X 8-5/8” REDUCING BUSHING 265.00
30-201 REMOVABLE HINGE PIN W/CHAIN FOR ALL SPIDERS 18.00
30-202 BUSHING HANDLE 4.00
30-204 BUSHING RETAINER BOLTS & NUTS 1.00
AOT DUAL SPIDER
The AOT Dual Spider is designed to run dual strings of tubing at the same time or one at a time. The spider has
a 100 ton rating. It has a size range of 1”（1.050”）thru 2 7/8” by simply changing inserts.
The spider will run any two different sizes or the same two sizes at the same time.
AOT# DESCRIPTION # REQ. WT.
17-860 DUAL BOWL COMPLETE W/BUSHING & 2 SLIP ASSY/S，LESS INSERTS 1 864.00
17-861 DUAL BOWL COMPLETE W/BUSHING
LESS SLIP ASSY/S 1 794.00
17-862 DUAL BUSHING ONLY 1 194.00
17-863 SLIP ASSY. LESS INSERTS 2 35.00
17-864 RIGHT HAND SEGMENT F/DUAL SLIP 1 PER SLIP 11.00
17-865 CENTER SEGMENT F/DUAL SLIP 1 PER SLIP 13.00
17-866 LEFT HAND SEGMENT F/DUAL SLIP 1 PER SLIP 11.00
17-110 HINGE PIN F/SLIP W/COTTER 2 PER SLIP .25
17-111 LINER KEEPER W/COTTER 3 PER SLIP .12
17-851 REMOVABLE HINGE PIN W/CHAIN 2 8.00
17-867 BUSHING RETAINING BOLTS 4 .25
17-868 BUSHING LIFTING EYES 2 .40
INSERTS FOR DUAL SLIPS
(NOTE EACH SLIP TAKES 6EA. INSERTS
BELOW & 3 REGULAR 3 1/2” TS-100 INSERTS)
AOT# DESCRIPTION # REQ. WT.
21-103-D 2 7/8” X 2 7/8” INSERT F/DUAL SLIP 6 1.50
21-104-D 2 7/8” X 2 3/8” INSERT F/DUAL SLIP 6 1.75
21-105-D 2 7/8” X 2 1/16” INSERT F/DUAL SLIP 6 2.00
21-106-D 2 7/8” X 1 1/2”（1.900”）INSERT F/DUAL SLIP 6 2.25
21-107-D 2 7/8” X 1 1/4”（1.660”）INSERT F/DUAL SLIP 6 2.50
21-108-D 2 7/8” X 1”（1.315”）INSERT F/DUAL SLIP 6 2.75
21-109-D 2 7/8” X 3/4”（1.050”）INSERT F/DUAL SLIP 6 2.87
INSERTS (SETS) FOR DUAL BOWL
AOT# DESCRIPTION # REQ. WT.
21-103-DSET 2 7/8” X 2 7/8”（SET) INSERTS F/DUAL SLIP 1 PER SLIP 13.50
21-104-DSET 2 7/8” X 2 3/8”（SET) INSERTS F/DUAL SLIP 1 PER SLIP 15.75
21-105-DSET 2 7/8” X 2 1/16”（SET) INSERTS F/DUAL SLIP 1 PER SLIP 18.00
21-106-DSET 2 7/8” X 1 1/2”（1.900” SET) INSERTS F/DUAL SLIP 1 PER SLIP 20.25
21-107-DSET 2 7/8” X 1 1/4”（1.660” SET) INSERTS F/DUAL SLIP 1 PER SLIP 22.50
21-108-DSET 2 7/8” X 1”（1.315” SET) INSERTS F/DUAL SLIP 1 PER SLIP 24.75
21-109-DSET 2 7/8” X 3/4”（1.050” SET) INSERTS F/DUAL SLIP 1 PER SLIP 25.83
AOT HYDRAULIC & PNEUMATIC TUBING SPIDERS
The AOT 125 TON HYD/AIR tubing spider is designed for heavy duty use. It has a size range of 1.315” – 5 1/2” by
changing out slip bodies & inserts. It is made of high alloy heat treated steel for strength & resistance to wear.
The AOT 55 TON HYD/AIR tubing spider is designed for light to medium duty operations with a size range
1.315” – 3 1/2” by changing out the inserts.
AOT HYDRAULIC/PNEUMATIC SPIDERS
AOT # DESCRIPTION # REQ. WT.
34-550 55 TON ASSY. LESS SLIP, INSERTS, HOSES,FOOT CONTROL , AND AIR FILTER 1 217.00
34-551 125 TON ASSY. LESS SLIP, INSERTS, HOSES, FOOT CONTROL, AND AIR FILTER 1 345.00
34-121 3 1/2” SLIP ASSY. (1.315” – 3 1/2”）LESS INSERTS f/55 TON 1 12.00
34-122 3 1/2” SLIP ASSY. (1.315” – 3 1/2”）LESS INSERTS f/125 TON 1 12.00
34-123 4 1/2” SLIP ASSY. (3 1/2” – 4 1/2”）LESS INSERTS f/125 TON 1 11.00
34-125 5” SLIP ASSY. w/MILL CUT TEETH f/125 TON 1 12.00
34-126 5 1/2” SLIP ASSY. w/MILL CUT TEETH f/125 TON 1 11.00
34-127 AIR FILTER, PRESSURE REGULATOR, GAUGE ASSY. w/LUBRICATOR & QUICK CHANGE CONN 1 15.68
34-132 HYD. CONTROL VALVE ASSY. 1 25.00
34-134 HYD. FOOT VALVE ONLY 1 10.00
34-133 HYD. DUST PLUG 4 .25
34-128 HYD. PRESSURE REDUCER WITH GAUGE ASSY. 1 8.00
34-129 AIR CONTROL VALVE ASSY. FOOT OPERATED W/QUICK CHANGE COUPLING 1 25.00
34-130 25J AIR HOSE 2 5.00
34-131 25J AIR SUPPLY HOSE 2 5.00
34-135 25J HYD. HOSE ASSEMBLY 2 5.00
34-136 25J HYD. HOSE 2 5.00
FULL CIRCLE INSERTS
3 1/2” X 3 1/2” INSERTS (SET OF 4)
34-206 3 1/2” X 2 7/8” INSERTS (SET OF 4) 1 14.00
34-207 3 1/2” X 2 3/8” INSERTS (SET OF 4) 1 17.00
34-228 3 1/2” X 2 1/16” INSERTS (SET OF 4) 1 18.50
34-229 3 1/2” X 1 1/2”（1.900”）INSERTS (SET OF 4) 1 19.00
34-230 3 1/2” X 1 1/4”（1.660”）INSERTS (SET OF 4) 1 19.50
34-231 3 1/2” X 1”（1.315”）INSERTS (SET OF 4) 1 20.00
34-209 4 1/2” X 4 1/2” INSERTS (SET OF 4) 1 10.00
34-210 4 1/2” X 4” INSERTS (SET OF 4) 1 12.00
34-211 4 1/2” X 3 1/2” INSERTS (SET OF 4) 1 14.00
RECOMMENDED INSERTS FOR 1 YEAR ORDER 2 SETS FOR EACH SIZE TO BE RUN
SLIP REPLACEMENT PARTS
AOT# DESCRIPTION *SPARES # REQ. WT.
34-150 SLIP BOLT 4 4 .50
34-151 NUT F/SLIP 4 4 .13
34-152 INSERT RETAINER PIN 4 4 .20
34-153 COTTER F/SLIP RETAINER PIN 4 4 .13
REPLACEMENT PARTS FOR
55 TON & 125 TON AOT SPIDERS
AOT# 55 TON AOT# 125 TON DESCRIPTION WSPARES #REQ. WT.
34-501 34-601 BODY ONLY 1 283.00
34-502 34-602 GATE 1 44.00
34-503 34-603 LINK 1 5.50
34-504 34-604 SHAFT (LEFT HAND CRANK) 1 8.00
34-505 34-605 SHAFT (RIGHT HAND CRANK) 1 8.00
34-506 34-606 LIFTING ARM 1 3.50
34-607 34-607 YOKE 1 1 1.00
34-508 34-608 SAFETY GUARD 1 4.50
34-609 34-609 GREASE ZERT 2 2 .03
34-610 34-610 BOLT 1 1 3.30
34-611 34-611 BOLT 1 1 3.30
34-612 34-612 NUT 2 2 1.40
34-613 34-613 BOLT W/LOCKWASHER 4 4 6.30
34-514 34-614 DOOR PIN W/CHAIN 2 2.00
34-615 34-615 SET SCREW (FOR LIFTING ARM) 2 2 .15
34-616 34-616 TAPER PIN (FOR LIFTING ARM)) 4 4 .50
34-517 34-617 RETAINING CLIP 2 2 1.00
34-618 34-618 GREASE ZERT 4 4 .03
34-519 34-619 CRANK BUSHING 4 4 1.00
34-520 34-620 LINK BUSHING 2 2 8.80
34-521 34-621 SPACER 2 2.12
34-628A 34-628A AIR COUPLING (MALE) 2 2 3.25
34-628H 34-628H HYDRAULIC COUPLING (MALE) 2 2 3.25
34-629 34-629 SAFETY LATCH 1 1 5.00
34-630 34-630 SAFETY BOLT 1 1 3.45
34-631 34-631 AIR CYLINDER ASSY. 1 14.00
34-632 34-632 HYDRAULIC CYLINDER ASSY. 1 14.00
34-633 34-633 JAM NUT 1 1 1.00
34-560 34-660 SPARE PARTS KIT F/1YEAR L/INSERTS 1 1 81.32
rev 805
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
AOT “K-25” LIGHT WEIGHT TUBING TONG
All tongs are pull-tested and complete documentation is available with each tong.
AOT # DESCRIPTION WT.
05-101 K-25 TONG COMPLETE LESS DIES, ROPE GUIDE & HANGER 16.50
05-102 K-25 TONG COMPLETE LESS DIES w/ROPE GUIDE & HANGER 21.00
REPLACEMENT PARTS FOR “K-20” & “K-25” TUBING TONGAOT# ITEM# DESCRIPTION REF.# #REQ. WT.*
05-103 1 TONG HEAD PIN 8527-5025 3 .12
05-104 2 TONG HANDLE PIN 8527-5024 1 .37
05-117 3 SPRING LOCK FOR ALL PINS 904685-71 8 .03
05-105 4 TONG DIE BUSHING & SCREW N/A 6 .06
05-106 5 K-25 HANDLE JAW 8527-5032 1 2.12
05-107 6 K-25 LATCH JAW 8527-5034-03 1 2.12
05-108 7 K-25 CENTER JAW 8527-5033 1 1.75
05-109 8 K-20 OR K-25 ROPE GUIDE 8527-5023 1 2.75
05-110 9 3/4” HEX NUT f/ROPE GUIDE 900645-50 1 .06
05-113 10 ROLLOVER HANGER COMPLETE 8527-5018-03 1 1.75
05-111 11 3/8” x 2 1/4” HEX CAP SCREW 900020-63 1 .06
05-112 12 3/8” FLEXLOCK NUT 902392-3 1 .06
05-114 13 TONG HANDLE f/K-25 OR K-20 8527-5024 1 9.75
DIES FOR K-20 AND K-25 REFER TO PAGE 54
*RECOMMENDED SPARE PARTS FOR ONE YEAR
RECOMMENDED DIES FOR ONE YEAR ORDER 3 FOR EACH SIZE REQUIRED
ALL PARTS ARE INTERCHANGEABLE WITH KELCO** K-20 & K-25 TUBING TONGS
AOT “K-30” MANUAL TUBING TONG
The AOT K-30 Tubing Tong is Designed for heavy duty service of tubing 2.062” to 4.125” OD with a 5,000 ft.-lb.
maximum torque rating. It has a wrap-around design with approximately a 300o die contact. This prevents cutting or
crushing of thin wall tubing. All tongs are pull tested and complete documentation is available with each tong.
AOT # DESCRIPTION REF# WT.
06-101 K-30 TONG ASSEMBLY COMPLETE LESS HANGER & DIES 8527-5035 48.00
06-102 K-30 TONG ASSEMBLY COMPLETE LESS DIES w/STANDARD HANGER 8527-5036 61.00
06-103 K-30 TONG ASSEMBLY COMPLETE LESS DIES w/ROLLOVER HANGER 8527-5037 64.00
REPLACEMENT PARTS FOR “K-30” TUBING TONGS
AOT# ITEM# DESCRIPTION REF# # REQ. WT.
06-104 1 K-30 TONG HANDLE 8527-5047 1 24.00
06-105 2 K-30 HANDLE JAW 8527-5045 1 8.00
06-106 3 K-30 CENTER JAW 8527-5049 1 5.50
06-107 4 K-30 LATCH JAW 8527-5050-03 1 5.75
06-108 5 TONG HANDLE PIN 8527-5052 1 1 .75
06-109 6 TONG HEAD PIN 8527-5053 3 3 .50
06-157 7 5/32” x 1” SPRINGLOCK 904685-71 8 .03
06-110 8 TONG DIE BUSHING 8527-5055 24 6 .10
06-111 9 TONG DIE SCREW 902224-11348 6 .06
06-112 TONG ROLLOVER HANGER ASSY 8527-5045 1 16.00
06-113 10 TONG HANGER 8527-5042-03 1 13.00
06-155 11 1/2” x 2 1/2” HEX HD CAP SCREW 900020-74 1 or 2 .15
06-156 12 1/2” HEX NUT 900160-5 1 or 2 .08
06-114 13 ROLLOVER BLOCK 8527-5038-03 1 2.50
06-115 ROLLOVER LOCK PIN 8527-5040-03 1 .38
DIES FOR K-30 REFER TO PAGE 54
RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUN
TONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK, LOCK PIN
AND ALL BOLTS & NUTS
ALL PARTS ARE INTERCHANGEABLE WITH KELCO® K-30 TONGS
AOT “K-50” MANUAL TUBING TONG
The AOT K-50 Manual Tubing Tong is designed for heavy duty service for tubing and casing. It has a size range of 2 7/8” – 5
1/2” OD with a 7,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300o die contact to
prevent cutting or crushing thin wall pipe. All tongs are pull tested and complete documentation is available.
AOT # DESCRIPTION WT.
06-501 K-50 TONG ASSEMBLY COMPLETE LESS HANGER & DIES 60.00
06-502 K-50 TONG ASSEMBLY COMPLETE LESS DIES w/STANDARD HANGER 75.00
06-503 K-50 TONG ASSEMBLY COMPLETE LESS DIES w/ROLLOVER HANGER 77.50
REPLACEMENT –
PARTS FOR “K-50” TUBING TONGS
AOT# ITEM# DESCRIPTION #REQ. WT. •SPARES
06-504 1 K-50 TONG HANDLE 1 32.00
06-505 2 K-50 HANDLE JAW 1 10.00
06-506 3 K-50 CENTER JAW 1 8.00
06-507 4 K-50 LATCH JAW 1 8.50
06-508 5 TONG HANDLE PIN 1 2.00 1
06-509 6 TONG HEAD PIN 3 1.50 3
06-516 7 3/16” x 1 1/2” SPRING LOCK 8 .04 8
06-510 8 TONG DIE BUSHING 6 .12 24
06-511 9 TONG DIE SCREW 6 .06 48
06-112 TONG ROLLOVER HANGER ASSEMBLY 1 16.00
06-113 10 TONG HANGER 1 13.00
06-155 11 1/2” x 2 1/2” HEX HEAD CAP SCREW 1 or 2 .15 2
06-156 12 1/2” HEX NUT 1 or 2 .08 2
06-114 13 ROLLOVER BLOCK 1 2.50
06-115 ROLLOVER LOCK PIN 1 .38
rev 805
DIES FOR K-50 REFER TO PAGE 54
*RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
RECOMMENDED DIES FOR 1 YEAR ORDER 3 FOR EACH SIZE PIPE TO BE RUN
TONG ROLLOVER HANGER ASSY. CONSISTS OF: TONG HANGER, ROLLOVER BLOCK,
LOCK PIN AND ALL BOLTS & NUTS
AOT “K-50 HT” MANUAL TONG
The AOT K-50 HT Manual Tong is designed for heavy duty service for tubing & casing.
It has a size range of 2 3/8” – 5” OD with a 15,000 ft.-lb. maximum torque rating.
It has a wrap-around design with approximately 300^ die contact to prevent cutting or crushing of thin wall pipe.
All tongs are pull tested and complete documentation is available.
AOT# DESCRIPTION WT.
06-605 K-50 HT TONG ASSY. COMPLETE LESS HANGER & DIES 82
06-606 K-50 HT TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER 98
06-607 K-50 HT TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER 100
REPLACEMENT PARTS FOR “K-50 HT” MANUAL TONGS
AOT# ITEM # DESCRIPTION # REQ. WT. *SPARES
06-704 1 K-50 HT – K-70 TONG HANDLE 1 40.00
06-601 2 K-50 HT HANDLE JAW 1 14.00
06-602 3 K-50 HT CENTER JAW 1 13.00
06-603 4 K-50 HT LATCH JAW 1 13.00
06-708 5 TONG HANDLE PIN 1 .75 1
06-508 6 TONG HEAD PIN 3 .50 3
06-516 7 3/16” X 1 1/2” SPRING LOCK 8 .04 8
06-510 8 TONG DIE BUSHING 6 .12 24
06-511 9 TONG DIE SCREW 6 .06 48
06-112 TONG ROLLOVER HANGER ASSY. 1 16.00
06-113 10 TONG HANGER 1 13.00
06-155 11 1/2” X 2 1/2” HEX HEAD CAP SCREW 1 OR 2 .15 2
06-156 12 1/2” HEX NUT 1 OR 2 .08 2
06-114 13 ROLLOVER BLOCK 1 2.50
06-115 ROLLOVER LOCK PIN 1 .38
DIES FOR K-50 HT SAME AS K-50 DIES PAGE 54
AOT “K-70” MANUAL TONG
The AOT K-70 Manual Tong is designed for heavy duty service for tubing & casing. It has a size range of 3 1/2”
7” OD
with a 12,500 ft.-lb. maximum torque rating. It has a wrap-around design with approximately 300^ die contact to prevent cutting
or crushing of thin wall pipe. All tongs are pull tested and complete documentation is available.
AOT# DESCRIPTION WT.
06-701 K-70 TONG ASSY. COMPLETE LESS HANGER & DIES 82
06-702 K-70 TONG ASSY. COMPLETE LESS DIES WITH STD. HANGER 98
06-703 K-70 TONG ASSY. COMPLETE LESS DIES W/ROLLOVER HANGER 100
REPLACEMENT PARTS FOR “K-70” MANUAL TONGS
AOT# ITEM # DESCRIPTION # REQ. WT. *SPARES
06-704 1 K-70 TONG HANDLE 1 40.00
06-705 2 K-70 HANDLE JAW 1 14.00
06-706 3 K-70 CENTER JAW 1 13.00
06-707 4 K-70 LATCH JAW 1 13.00
06-708 5 TONG HANDLE PIN 1 .75
06-508 6 TONG HEAD PIN 3 .50
06-516 7 3/16” X 1 1/2” SPRING LOCK 8 .04
06-510 8 TONG DIE BUSHING 6 .12
06-511 9 TONG DIE SCREW 6 .06
06-112 TONG ROLLOVER HANGER ASSY. 1 16.00
06-113 10 TONG HANGER 1 13.00
06-155 11 1/2” X 2 1/2” HEX HEAD CAP SCREW 1 OR 2 .15
06-156 12 1/2” HEX NUT 1 OR 2 .08
06-114 13 ROLLOVER BLOCK 1 2.50
06-115 ROLLOVER LOCK PIN 1 .38
DIES FOR “K-70” TONGS
AOT# DESCRIPTION # REQ. WT.
06-758 K-70 – 3 1/2” 3 13.25
06-757 K-70 – 4” 3 12.00
06-756 K-70 – 4 1/2” 3 10.50
06-755 K-70 – 4 3/4” 3 10.25
06-754 K-70 – 5” 3 9.50
06-753 K-70 – 5 1/2” 3 8.00
06-759 K-70 – 5 3/4” 3 7.25
06-752 K-70 – 6” 3 6.25
06-751 K-70 – 6 5/8” 3 4.75
06-750 K-70 – 7” 3 3.00
DIES FOR “K-20”，“K-25”， “K-30”，“K-50” & “K-50HT” TUBING TONGS
AOT# DESCRIPTION REF.# # SET WT.
04-119 K-20 – 3/4”（1.050”） 8527-5056-01 3 1.13
04-120 K-20 – 1”（1.315”） 8527-5058-01 3 1.07
04-121 K-20 – 1-1/4”（1.660”） 8527-5061-01 3 .94
04-122 K-20 – 1-1/2”（1.900”） 8527-5064-01 3 .75
04-123 K-20 – 2-1/16” 8527-5066-01 3 .63
04-124 K-20 – 2-3/8” 8527-5068-01 3 .41
05-129 K-25 – 3/4”（1.050”） N/A 3 1.75
05-120 K-25 – 1”（1.315”） 8527-5070-01 3 1.63
05-121 K-25 – 1-1/4”（1.660”） 8527-5071-01 3 1.50
05-122 K-25 – 1-1/2”（1.900”） 8527-5072-01 3 1.32
05-123 K-25 – 2-1/16” 8527-5074-01 3 1.30
05-124 K-25 – 2-3/8” 8527-5075-01 3 1.25
05-125 K-25 – 2-1/2” 8527-5076-01 3 .95
05-126 K-25 – 2.697” 8527-5077-01 3 .63
05-127 K-25 – 2.776” N/A 3 .55
05-128 K-25 – 2-7/8” 8527-5078-01 3 .58
06-132 K-30 – 3/4” N/A 3 5.50
06-136 K-30 – 1” N/A 3 5.25
06-133 K-30 – 1-1/4”（1.660”） N/A 3 5.00
06-134 K-30 – 1-1/2”（1.900”） N/A 3 4.60
06-119 K-30 – 2-1/16” 8527-5081-01 3 4.10
06-120 K-30 – 2-3/8 8527-5083-01 3 3.80
06-121 K-30 – 2-7/8” 8527-5086-01 3 3.10
06-135 K-30 – 3” N/A 3 3.00
06-122 K-30 – 3-1/16” 8527-5087-01 3 2.80
06-123 K-30 – 3-1/8” N/A 3 2.75
06-124 K-30 – 3-1/4” 8527-5086-01 3 2.50
06-130 K-30 – 3-3/8” N/A 3 2.40
06-125 K-30 – 3-1/2” 8527-5090-01 3 2.10
06-126 K-30 – 3.668” 8527-5091-01 3 1.70
06-127 K-30 – 3-3/4” 8527-5092-01 3 1.50
06-131 K-30 – 3-7/8” N/A 3 1.40
06-128 K-30 – 4-1/8” 8527-5094-01 3 .80
06-575 K-50 & K-50HT – 2-7/8” N/A 3 6.33
06-576 K-50 & K-50HT – 3-1/2” N/A 3 5.33
06-577 K-50 & K-50HT – 3-3/4” N/A 3 4.74
06-578 K-50 & K-50HT – 4” N/A 3 4.15
06-579 K-50 & K-50HT – 4-1/8” N/A 3 4.05
06-580 K-50 & K-50HT – 4-1/2” N/A 3 3.50
06-581 K-50 & K-50HT – 4-3/4” N/A 3 2.92
06-582 K-50 & K-50HT – 5” N/A 3 2.33
06-583 K-50 & K-50HT -5-1/2” N/A 3 1.17
AOT TYPE “C” SAFETY CLAMP
The AOT Type “C” Safety Clamp is one of the most valuable tools on the Rig Floor. It helps guard against dropping flush-joint pipe, streamlined
drill collars, etc. into the hole while making-up or breaking-out the string. These clamps are ideal as an emergency elevator shoulder for lifting
prepacked gravel liners, flush-joint pipe, twisted-off fish and similar items which have no shoulders for attaching conventional elevators. The
Type “C” Safety Clamp can be used as a “Slip and Elevator” combination when running large diameter surface casing or used for simplified
handling of drilling risers and casing heads during installation. Literally, it has dozens of money and time-saving applications in oilfield work,
in addition to giving increased protection against fishing jobs.
The Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered slip which acts as a gripping member,
much like a tapered rotary slip, and each slip is held in a retracted position on the taper by spring tension. When the clamp is tightened, each
small slip takes a firm initial grip on the surface of the pipe. Should the pipe start to fall, or should load increase occur against the slips, the
taper mounting causes each slip to wedge tighter against the surface of the pipe to increase the grip or lock the pipe against further
movement.
Gripping pressure is always uniform around the pipe so there is little danger of crushing thin-walled pipe or damaging the pipe surface. And,
since each link, complete with tapered slip, is interchangeable as a unit, the Safety Clamp is readily adaptable to virtually any diameter. Each
link changes the effective gripping diameter of the clamp one inch. All parts are made of alloy steel, heat-treated for strength and gripping
ability.
CLAMPS WITH HANDLES & WRENCH
TYPE “CR”（SINGLE SCREW)
AOT# RANGE O.D. SIZE REFERENCE LINKS REQUIRED WT.
12-127 3 3/4” – 4 5/8” 7624-5103 7 46.00
12-128 4 1/2” – 5 5/8” 7624-5104 8 55.00
12-129 5 1/2” – 6 5/8” 7624-5105 9 60.00
12-130 6 1/2” – 7 5/8” 7624-5105 10 64.00
12-131 7 1/2” – 8 5/8” 7624-5105 11 69.00
12-132 8 1/2” – 9 5/8” 7624-5105 12 73.00
12-133 9 1/2” – 10 5/8” 7624-5105 13 78.00
TYPE “CL”（SINGLE SCREW)
12-134 10 1/2” – 11 5/8” 7624-5103 14 82.00
12-135 11 1/2” – 12 5/8” 7624-5104 15 87.00
12-136 12 1/2”-13 5/8” 7624-5105 16 91.00
12-137 13 1/2”-14 5/8” 7624-5105 17 115.00
12-138 14 1/2”-15 5/8” 7624-5105 18 119.00
TYPE “C X L”（DOUBLE SCREW)
12-145 15 1/2” – 17” 7624-5103 18 121.00
12-146 16 1/2” – 18” 7624-5104 19 125.00
12-147 17 1/2” – 19” 7624-5105 20 129.00
12-148 18 1/2” – 20” 7624-5105 21 134.00
ADD – “B” TO END OF PART NUMBER TO INCLUDE BOX
CLAMPS WITH LIFTING CLEVIS
TYPE “CL”（SINGLE SCREW)
AOT # RANGE O.D. SIZE REFERENCE # LINKS REQUIRED WT.
12-150 10 1/2” – 11 5/8” 7624-5103 14 85.00
12-151 11 1/2” – 12 5/8” 7624-5104 15 89.00
12-152 12 1/2”-13 5/8” 7624-5105 16 94.00
12-153 13 1/2”-14 5/8” 7624-5105 17 99.00
12-154 14 1/2”-15 5/8” 7624-5105 18 104.00
TYPE “C X L”（DOUBLE SCREW)
12-155 15 1/2” – 17” 7624-5103 18 36.00
12-156 16 1/2” – 18” 7624-5104 19 40.00
12-157 17 1/2” – 19” 7624-5105 20 44.00
12-158 18 1/2” – 20” 7624-5105 21 44.00
12-159 19 1/2” – 21” 7624-5105 22 44.00
12-160 21 1/8” – 23” 7624-5103 24 36.00
12-161 24 1/8” – 26” 7624-5104 27 40.00
12-162 29 1/2” – 31” 7624-5105 32 44.00
12-163 35 1/2” – 37” 7624-5105 38 44.00
12-164 41 1/2” – 47” 7624-5105 44 44.00
ADD -B TO END OF PART # TO INCLUDE BOX
REPLACEMENT PARTS FOR TYPE “C” SAFETY CLAMP
AOT# ITEM DESCRIPTION REFERENCE # ** SPARES WT.
12-101 1 LINK ASSY. COMPLETE 7624-A-7 5.00
12-102 2 LINK INTERMEDIATE 7624-A-1 6 3.75
12-103 3 INSERT w/COTTER 7624-A-4 1 SET 1.12
12-104 5 COTTER f/INSERT 900620-65 .06
12-105 4 SPRING f/INSERT 7624-E-5 1 SET .06
11-106 6 LINK PIN w/COTTER 7624-C-5 6 .75
11-107 7 COTTER f/LINK PIN 900620-36 .06
11-108 8 END LINK (SCREW) 7624-A-3 4.50
11-109 9 END LINK (PIVOT BLOCK) 7624-A-24 3.50
11-110 10 END LINK PIN w/CHAIN 7624-F-5 1 1.25
11-111 11 SCREW 7624-A-5 4.00
11-112 12 NUT 7624-B-5 1.50
11-113 13 PIVOT BLOCK 7624-A-5000 1.50
11-114 14 PIVOT BLOCK PIN 7624-D-5 .25
11-115 15 NUT WRENCH 7624-A-25 4.00
11-116 16 HANDLE (CAST STEEL) 7624-A-6 3.00
11-117 17 HANDLE LINK PIN w/COTTER 7624-G-5 .75
11-118 18 HANDLE KIT 7624-A-5135 4.00
11-119 19 PIVOT BLOCK PIN WRENCH 900533-12 .25
11-120 SAFETY CLAMP BOX 7624-A-9 45.00
12-119 LIFTING CLEVIS COMPLETE 7624-29 15.00
12-120 21 LIFTING CLEVIS ONLY 7624-A-29 9.00
12-121 21 CLEVIS PIN & NUT 7624-A-30 2.50
ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “C” SAFETY CLAMPS
AOT TYPE “T” SAFETY CLAMP
The AOT Type “T” Safety Clamp is designed for small diameter pipe 1 1/8” – 4 1/2”
O.D. Each link changes the effective working range approximately 1” in diameter. For
sizes larger than 4 1/2” O.D., the Type “C” Safety Clamp should be used.
The same positive automatic gripping principle is used as in the Type “C” Safety
Clamp. It is ideal to help safeguard against dropping strings of flush joint tubing, to
provide a shoulder to position strings of flush line pipe for welding, and manyother
SAFETY CLAMP ASSEMBLIES COMPLETE – TYPE “T”
AOT# RANGE O.D. SIZE REFERENCE #LINK REQ，D WT.
11-125 1 1/8” – 2” 7624-5103 4 36.00
11-126 2 1/8”-3 1/4” 7624-5104 5 40.00
11-127 3 1/2”-4 1/2” 7624-5105 6 44.00
ADD -B TO END OF PART NUMBER TO INCLUDE BOX
REPLACEMENT PARTS FOR TYPE “T” SAFETY CLAMP
AOT # ITEM DESCRIPTION REFERENCE # 的 SPARES WT.
11-101 1 LINK ASSY. COMPLETE 7624-B-7 4.25
11-102 2 LINK INTERMEDIATE 7624-A-18 3 3.25
11-103 3 INSERT w/COTTER 7624-A-21 6 .25
11-104 4 COTTER f/INSERT 900620-52 .06
11-105 5 SPRING f/INSERT 7624-B-21 6 .06
11-106 6 LINK PIN w/COTTER 7624-C-5 3 .75
11-107 7 COTTER f/LINK PIN 900620-36 .06
11-108 8 END LINK (SCREW) 7624-A-20 4.50
11-109 9 END LINK (PIVOT BLOCK) 7624-A-19 3.50
11-110 10 END LINK PIN w/CHAIN 7624-F-5 1 1.25
11-111 11 SCREW 7624-A-5 4.00
11-112 12 NUT 7624-B-5 1.50
11-113 13 PIVOT BLOCK 7624-A-5000 1.50
11-114 14 PIVOT BLOCK PIN 7624-D-5 .25
11-115 15 NUT WRENCH 7624-A-25 4.00
11-116 16 HANDLE (CAST STEEL) 7624-A-22 3.00
11-117 17 HANDLE LINK PIN w/COTTER 7624-G-5 .75
11-118 18 HANDLE KIT 7624-A-5138 4.00
11-119 19 PIVOT BLOCK PIN WRENCH 900533-12 .12
11-120 N/P SAFETY CLAMP BOX 7624-A-9 45.00
11-121 N/P 1 YEAR SPARE PARTS KIT N/A 1 13.00
rev 805
ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® TYPE “T” SAFETY CLAMPS
** RECOMMENDED SPARE PARTS FOR 1 YEARS SERVICE
AOT TYPE “A-MP” SAFETY CLAMPS
AOT# RANGE REFERENCE # # LINKS GRIPPING DIES WT.
A-MP-S
31-009 2 7/8” – 4 1/8” 33030 7 8 128.00
31-010 4” – 5” 33031 8 9 133.00
A-MP-R
31-011 4 1/2” – 5 5/8” 33011 7 8 120.00
31-012 5 1/2”-7” 33012 8 9 130.00
31-013 6 3/4” – 8 1/4” 33013 9 10 138.00
31-014 8”- 91/4” 33014 10 11 147.00
31-015 91/4” – 101/2” 33015 11 12 155.00
A-MP-M
31-016 10 1/2” – 11 1/2” 33016 12 13 163.00
31-017 11 1/2” – 12 1/2” 33017 13 14 171.00
31-018 12 1/2”-13 5/8” 33018 14 15 179.00
31-019 13 5/8” – 14 3/4” 33019 15 16 187.00
31-020 14 3/4” – 15 7/8” 31020 16 17 195.00
A-MP-L
31-021 15 7/8” – 17” 33021 17 18 215.00
31-022 17” – 18 1/2” 33022 18 19 223.00
31-023 18 1/8”-19 3/8” 33023 19 20 231.00
A-MP-XL
31-024 19 3/8” – 20 3/8” 33024 19 20 280.00
31-025 20 3/8” – 21 1/2” 33025 20 21 288.00
31-032 21” -22 5/8” 33032 21 22 296.00
31-033 22 5/8” – 23 3/4” 33033 22 23 304.00
31-034 23 3/4” – 24 7/8” 33034 23 24 312.00
31-035 24 7/8” – 26” 33035 24 25 320.00
31-036 26” – 27 1/8” 33036 25 26 328.00
31-039 29 3/8” – 30 1/2” 33039 28 29 336.00