AOT# SLIP BODY SIZE TYPE REF# WT.
03-114 41/2” DU/REGULAR 7613-59 123.00
03-115 41/2” DU/LONG 7613-64 150.00
03-116 51/2” DU/REGULAR 7613-60 128.00
03-117 51/2” DU/LONG 7613-65 162.00
03-118 7” DU/REGULAR 7613-62 132.00
03-119 7” DU/LONG 7313-66 192.00
REPLACEMENT PARTS FOR AOT “DU” REGULAR ROTARY SLIPS
AOT# ITEM# DESCRIPTION •SPARES #REQ. REF.# WT.
03-102 1 REAR HANDLE 1 1 7613-5195 5.00
03-105 2 HINGE PIN 2 2 7613-A-12 1.25
03-101 3 FRONT HANDLE 2 2 7613-A-157 4.00
03-104 4 LINER RETAINER KEY 3 3 7613-A-52 1.50
03-106 6 FRONT HANDLE PIN 2 2 7613-B-12 .25
03-107 7 REAR HANDLE PIN 1 1 7613-C-12 .38
03-108 8 HINGE SPRING ASSY. 2 2 7613-211 1.25
9 INSERTS F/DU SEE PAGE 4 18
03-300 10 SAFETY FLEX HANDLE (UNIVERSAL) 3 5.00
REPLACEMENT PARTS FOR AOT “DU” LONG ROTARY SLIPS
AOT# ITEM# DESCRIPTION •SPARES #REQ. REF.# WT.
03-102 1 REAR HANDLE 1 1 7613-5195 5.00
03-105 2 HINGE PIN 2 2 7613-A-12 1.25
03-101 3 FRONT HANDLE 2 2 7613-A-157 4.00
03-103 5 LINER RETAINER KEY 3 3 7613-A-67 1.75
03-106 6 FRONT HANDLE PIN 2 2 7613-B-12 .25
03-107 7 REAR HANDLE PIN 1 1 7613-C-12 .38
03-108 8 HINGE SPRING ASSY. 2 2 7613-211 1.25
9 INSERTS F/DU SEE PAGE 4 24
03-300 10 SAFETY FLEX HANDLE (UNIVERSAL) 3 5.00
★RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
INSERTS FOR 4 1/2” “DU” ROTARY TYPE SLIPS AND FOR 4 1/2” “TS-100” SPIDER SLIPS
AOT # DESCRIPTION REF.# WT. AOT # (SPECIAL FULL FACE INSERTS)
03-120 4 1/2” X 4 1/2” 7613-A-81 .75 03-210
4 1/2” X 4 3/8” N/A .80 03-213
4 1/2” X 4 1/4” N/A .85 03-216
4 1/2” X 4 1/8” N/A .90 03-219
03-121 4 1/2” X 4” 7613-FF-81 1.00 03-221
4 1/2” X 3 3/4” N/A 1.75 03-224
03-122 4 1/2” X 3 1/2” 7613-C-82 1.50 03-227
4 1/2” X 3 3/8” N/A 1.65 03-229
4 1/2” X 3 1/4” N/A 1.75 03-228
4 1/2” X 3 1/8” N/A 1.85 03-230
4 1/2” X 3” N/A 1.90 03-231
03-123 4 1/2” X 2 7/8” 7613-B-82 2.00 03-233
03-124 4 1/2” X 2 3/8” 7613-A-82 2.25 03-236
03-125 4 1/2” X 2 1/16” 7613-M-82 2.50 03-237
03-126 4 1/2” X 1.900” 7613-H-82 2.75 03-238
03-127 4 1/2” X 1.660” N/A 2.80 03-239
INSERTS FOR 5 1/2” “DU” ROTARY TYPE SLIPS AND 5 1/2” “TS-100” SLIPS
AOT# DESCRIPTION REF. # WT. AOT # (SPECIAL FULL FACE INSERTS)
5 1/2” X 5 3/4” N/A .85 03-241
03-130 5 1/2” X 5 1/2” 7613-H-81 1.00 03-240
03-131 5 1/2” X 5” 7613-G-81 1.50 03-243
5 1/2” X 4 3/4” N/A 1.75 03-246
03-132 5 1/2” X 4 1/2” 7613-E-81 2.00 03-249
5 1/2” X4 3/8” N/A 2.10 03-247
5 1/2” X 4 1/4” N/A 2.15 03-252
5 1/2” X 4 1/8” N/A 2.20 03-255
03-133 5 1/2” X 4” N/A 2.25 03-258
5 1/2” X 3 3/4” N/A 2.28 03-261
03-134 5 1/2” X 3 1/2” 7613-E-82 2.31 03-264
5 1/2” X 3 1/4” N/A 2.38 03-266
5 1/2” X 3 1/8” N/A 2.45 03-268
5 1/2” X 3” N/A 2.52 03-270
5 1/2” X 2 7/8” N/A 2.60 03-275
5 1/2” X 2 3/8” N/A 2.80 03-277
INSERTS FOR 7” “DU” ROTARY TYPE SLIPS
AOT# DESCRIPTION REF. # WT.
03-140 7” X 7” 7613-EE-81 1.25
03-141 7” X 6 5/8” 7613-DD-81 1.75
03-146 7” X 5 7/8” N/A 3.00
03-142 7” X 5 1/2” 7613-Z-81 3.25
03-143 7” X 5” 7613-Y-81 3.75
03-144 7” X 4 1/2” 7613-W-81 4.00
NOTE: “DU” REGULAR REQUIRES 18 INSERTS PER SET
“DU” LONG REQUIRES 24 INSERTS PER SET
4 1/2” & 5 1/2” “TS-100” SLIPS REQUIRE 12 INSERTS PER SET
1 SET INSERTS PER PIPE SIZE RECOMMENDED FOR 1 YEAR SPARES
All Access “SDML” and “SDXL” Slips are made of alloy steel and heat-treated for strength and long life.
These slips are then machined by strict quality control procedures for use in API standard bowls.
AOT “SD” TYPE ROTARY SLIPS LESS INSERTS
AOT# SLIP BODY SIZE TYPE REF# WT.
23-100 3 1/2” O.D. SDML 15522-1 153.00
23-200 4 1/2” O.D. SDML 15565-1 173.00
23-300 5” O.D. SDML 15569-1 170.00
24-200 4 1/2” O.D. SDXL 15562 182.00
24-100 5” O.D. SDXL 15566 193.00
24-300 5 1/2” O.D. SDXL 15570 190.00
AOT “SD” TYPE ROTARY SLIPS WITH INSERTS
AOT# SLIP SIZE/PIPE SIZE TYPE REF# WT.
23-135 31/2” x 3 1/2” SDML 15522 180.00
23-127 31/2” x 27/8” SDML 15523 188.00
23-123 31/2” x 23/8” SDML 15524 193.00
23-245 41/2” x 4 1/2” SDML 15565 188.00
23-240 41/2” x 4” SDML 15564 199.00
23-235 41/2” x 3 1/2” SDML 15563 207.00
23-500 5” x 5” SDML 15569 185.00
23-545 5” x 41/2” SDML 15568 196.00
23-540 5” x 4” SDML 15567 204.00
23-455 51/2” x 5 1/2” SDML 15573 181.00
23-450 51/2” x 5” SDML 15572 192.00
23-445 51/2” x 4 1/2” SDML 15571 200.00
24-245 41/2” x 4 1/2” SDXL 15513 205.00
24-240 41/2” x 4” SDXL 15514 219.00
24-235 41/2” x 3 1/2” SDXL 15515 229.00
24-150 5” x 5” SDXL 15516 213.00
24-145 5” x 4 1/2” SDXL 15517 227.00
24-140 5” x 4” SDXL 15518 237.00
24-355 51/2” x 5 1/2” SDXL 15519 210.00
24-350 51/2” x 5” SDXL 15520 224.00
24-345 51/2” x 4 1/2” SDXL 15521 234.00
REPLACEMENT PARTS FOR “SD” TYPE ROTARY SLIPS
AOT# ITEM# DESCRIPTION SIZE #REQ. REF.# WT. SPARES*
23-150 1 LEFT HANDLE ALL 1 3768 3.50 1
14-103 2 REAR HANDLE ALL 1 3766 4.00 1
23-151 3 RIGHT HANDLE ALL 1 3767 3.50 1
14-105 4 HANDLE PIN w/WASHER & COTTER ALL 3 3769 .50 3
23-104 5 INSERT RETAINER RING 3 1/2” 3 3738 1.00 3
23-105 5 INSERT RETAINER RING 4 1/2” 3 3739 1.00 3
23-106 5 INSERT RETAINER RING 5” 3 3741 1.00 3
23-107 5 INSERT RETAINER RING 5 1/2” 3 3740 1.00 3
23-108 5 INSERT RETAINER RING 7” 3 3742 1.00 3
23-109 6 INSERT RETAINER SCREW & NUT ALL 6 3737 .02 12
23-110 7 INSERT SEE CHART
23-111 8 HINGE PINS w/COTTER ALL 2 2192 1.20 2
23-112 9 SAFETY FLEX HANDLE ALL 3 N/A 4.00
★RECOMMENDED SPARE PARTS FOR 1 YEAR SERVICE
INSERTS FOR “SDML” & “SDXL” SLIPS AOT# SIZE TYPE REF# WI//SEI SDML/SDXL
23-155 3 1/2” x 31/2” BASIC 2162 10.00
23-156 3 1/2” x 2 7/8” REDUCER 2161 15.00
23-157 3 1/2” x 23/8” REDUCER 2160 20.00
23-158 4 1/2” x 41/2” BASIC 2165 15.00 / 18.00
23-159 4 1/2” x 4” REDUCER 2164 23.00 / 27.00
23-160 4 1/2” x 31/2” REDUCER 2163 30.00 / 36.00
23-161 5” x 5” BASIC 2167 15.00 / 18.00
23-162 5” x 4 1/2” REDUCER 2166 23.00 / 27.0
23-163 5” x 4” REDUCER 2168 30.00 / 36.00
23-164 5 1/2” x 51/2” BASIC 2170 15.00 / 18.00
23-165 5 1/2” x 5” REDUCER 2169 23.00 / 27.00
23-163 5 1/2” x 41/2” REDUCER 2168 30.00 / 36.00
23-166 7” x 7” BASIC 2173 20.00 / 26.00
23-167 7” x 6 5/8” REDUCER 2172 25.00 / 41.00
ALL “SDXL” SLIPS EXCEPT 7” TAKE 54 INSERTS
3 1/2” “SDML “SLIPS TAKE 30 INSERTS
ALL OTHER “SDML” SLIPS EXCEPT 7” TAKE 45 INSERTS
7” “SDXL” SLIPS TAKE 72 INSERTS
7” “SDML” SLIPS TAKE 60 INSERTS
RECOMMENDED SPARES INCLUDE 3 SETS INSERTS FOR EACH PIPE SIZE TO BE RUN
REPLACEMENT PARTS FOR WOOLLEY® TYPE “A” DRILL COLLAR SLIPS
AOT# ITEM# DESCRIPTION REF# # REQ. WT.
08-102 1 HANDLE 707-000-0200 3 2.5
08-103 2 HANDLE PIN 707-000-3000 3 .15
20-101 3 HINGE PIN 707-000-0100 • 1.15
20-102 4 INSERT RET. PIN 707-000-0600 • .40
20-103 5 INSERT 707-000-0500 • .25
REPLACEMENT PARTS FOR VARCO® PS-15 & PS-16 SLIPS
AOT# DESCRIPTION REF. # # REQ. WT.
34-700 3 1/2” GUIDE RING 79011-1 1 98.00
34-701 4” & 4 1/2” GUIDE RING 79011-2 1 106.00
34-702 5” GUIDE RING 79014-3 1 80.00
34-703 5 1/2” GUIDE RING 79014-4 1 72.00
REPLACEMENT PARTS FOR ACCESS TYPE “B” ROTARY SLIPS
AOT# ITEM# DESCRIPTION REF# # REQ. WT.
19-101 1 HINGE PIN 737-000-0500 2 1.12
19-102 2 RIGHT HANDLE 737-000-0300 1 5.35
19-103 3 HANDLE PIN 737-000-0400 3 .25
19-104 4 REAR HANDLE 737-000-0200 1 5.50
19-105 5 LEFT HANDLE 737-000-0100 1 5.35
19-106 6 INSERT RET. PIN 737-000-0600 3 .30
INSERTS FOR ACCESS TYPE “B” ROTARY SLIP
AOT# DESCRIPTION REF# # REQ. WT.
19-250 4-1/2” X 4-1/2” 757-044-0144 * .85
19-251 4-1/2” X 4” 757-044-0140 1.20
19-252 4-1/2” X 3-1/2” 757-044-0134 1.75
19-253 4-1/2” X 2-7/8” 757-044-0127 2.00
19-254 4-1/2” X 2-3/8” 757-044-0123 2.15
19-255 4-1/2” X 2-1/16” N/A * 2.45
- LONG REQUIRES 24 INSERTS PER SET
REGULAR REQUIRES 18 INSERTS PER SET
AOT “C1” TYPE DRILL COLLAR SLIP
The AOT “C-1” Drill Collar Slip has a multi-segment design that allows it to hinge so that it fits all drill collars within the slip’s
size range. The AOT “C-1” Slip Segments are made of alloy steel which are heat-treated for strength and wear resistance.
AOT TYPE “C-1” DRILL COLLAR SLIPS COMPLETE
AOT # DRILL COLLAR SIZE / SLIP RECESS REFERENCE WT.
08-111 3” – 4 1/2” 7638-5104 112.
08-112 41/4” – 53/4” 7638-5105 122.
08-113 51/2” – 7” 7638-5106 134.
08-114 6 3/4” – 81/4” 7638-5107 118.
08-115 81/2” – 10” 7638-5108 98.
08-116* 10” – 11 1/4” 7638-5109 158.
08-117 ** 11 1/4” – 12 3/4” 7638-5110 210.
ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS
- FITS NO. 2 INSERT BOWL
** FITS NO. 1 INSERT BOWL
REPLACEMENT PARTS FOR “C-1” DRILL COLLAR SLIPS
AOT # ITEM #DESCRIPTION ** SPARES SIZE REQ* REF. # WT.
08-102 1 HANDLE 3 3” – 10” 3 7638-A-78 2.50
08-102 1 HANDLE 4 10” – 123/4” 4 7638-A-78 2.50
08-107 2 BODY SEGMENT (RIGHT HAND) 3” – 4 1/2” 1 7638-5099-11 10.75
08-120 2 BODY SEGMENT (RIGHT HAND) 4 1/4” – 5 3/4” 1 7638-5100-11 9.25
08-124 2 BODY SEGMENT (RIGHT HAND) 51/2” – 7” 1 7638-5101-11 8.25
08-129 2 BODY SEGMENT (RIGHT HAND) 6 3/4” – 8 1/4” 1 7638-5102-11 7.00
08-133 2 BODY SEGMENT (RIGHT HAND) 8 1/2” – 10” 1 7638-5103-11 5.75
08-129 2 BODY SEGMENT (RIGHT HAND) 10” – 11 1/4” 1 7638-5102-11 7.00
08-124 2 BODY SEGMENT (RIGHT HAND) 11 1/4” – 12 3/4” 1 7638-5101-11 8.25
08-108 3 BODY SEGMENT (INTERMEDIATE) 3” – 4 1/2” 6 7638-5099-10 10.75
08-121 3 BODY SEGMENT (INTERMEDIATE) 4 1/4” – 5 3/4” 8 7638-5100-10 9.25
08-125 3 BODY SEGMENT (INTERMEDIATE) 51/2” – 7” 10 7638-5101-10 8.25
08-130 3 BODY SEGMENT (INTERMEDIATE) 6 3/4” – 8 1/4” 10 7638-5102-10 7.00
08-134 3 BODY SEGMENT (INTERMEDIATE) 8 1/2” – 10” 10 7638-5103-10 5.75
08-130 3 BODY SEGMENT (INTERMEDIATE) 10” – 11 1/4” 15 7638-5102-10 7.00
08-125 3 BODY SEGMENT (INTERMEDIATE) 11 1/4” – 12 3/4” 17 7638-5101-10 8.25
08-109 4 BODY SEGMENT (LEFT HAND) 3” – 4 1/2” 1 7638-5099-12 10.75
08-122 4 BODY SEGMENT (LEFT HAND) 4 1/4” – 5 3/4” 1 7638-5100-12 9.25
08-126 4 BODY SEGMENT (LEFT HAND) 51/2” – 7” 1 7638-5101-12 8.25
08-131 4 BODY SEGMENT (LEFT HAND) 6 3/4” – 8 1/4” 1 7638-5102-12 7.00
08-135 4 BODY SEGMENT (LEFT HAND) 8 1/2” – 10” 1 7638-5103-12 5.75
08-131 4 BODY SEGMENT (LEFT HAND) 10” – 11 1/4” 1 7638-5102-12 7.00
08-126 4 BODY SEGMENT (LEFT HAND) 11 1/4” – 12 3/4” 1 7638-5101-12 8.25
08-103 5 HANDLE PIN w/COTTER 1 3” – 10” 3 7638-E-2 .15
08-103 5 HANDLE PIN w/COTTER 2 10” – 123/4” 4 7638-E-2 .15
08-104 6 LINER KEEPER w/BOLT & WASHER 4 3” – 4 1/2” 8 7638-5113 1.00
08-104 6 LINER KEEPER w/BOLT & WASHER 5 4 1/4” – 5 3/4” 10 7638-5113 1.00
08-104 6 LINER KEEPER w/BOLT & WASHER 6 5 1/2” – 10” 12 7638-5113 1.00
08-104 6 LINER KEEPER w/BOLT & WASHER 8 10” – 11 1/4” 17 7638-5113 1.00
08-104 6 LINER KEEPER w/BOLT & WASHER 9 11 1/4” – 12 3/4” 19 7638-5113 1.00
08-105 7 RENEWABLE LINER 3” – 12 3/4” * 7638-116 1.00
08-101 8 HINGE PIN w/COTTER 3 3” – 4 1/2” 7 7638-B-59 1.15
08-101 8 HINGE PIN w/COTTER 3 4 1/4” – 5 3/4” 9 7638-B-59 1.15
08-101 8 HINGE PIN w/COTTER 3 5 1/2” – 8 1/4” 11 7638-B-59 1.15
08-106 8 HINGE PIN w/COTTER 3 8 1/2” – 10” 11 7638-B-59 .85
08-101 8 HINGE PIN w/COTTER 4 10” – 11 1/4” 16 7638-B-59 1.15
08-101 8 HINGE PIN w/COTTER 4 11 1/4” – 12 3/4” 18 7638-B-59 1.15
08-136 9 SAFETY FLEX HANDLE ALL A/R N/A 5.00
ALL PARTS ARE INTERCHANGEABLE WITH BAASH-ROSS® “C-1” DRILL COLLAR SLIPS
*SAME QUANTITY AS ITEM #6
AOT “DCS” TYPE DRILL COLLAR SLIPS
The AOT “DCS” Type Drill Collar Slip has a multi-segment design to give a full wrap-around to insure a proper slip setting.
The slips are made of alloy steel and heat-treated for strength and long life.
AOT “DCS” DRILL COLLAR SLIPS COMPLETE
AOT# DRILL COLLAR SIZE/ SLIP RECESS TYPE SLIP REF# TOTAL SEGMENTS WT.
16-120 3” – 4” DCS-S 2572 7 112
16-121 4” – 4 7/8” DCS-S 2573 7 103
16-122 4 1/2” – 6” DCS-R 2552 9 120
16-123 5 1/2” – 7” DCS-R 2550 9 112
16-125 5 1/2” – 7” DCS-L 2501 11 172
16-126 6 3/4” – 8 1/4” DCS-L 2503 11 154
16-127 8” – 91/2” DCS-L 2507 12 173
16-128 8 1/2” – 10” DCS-L 2530 13 185
16-129 9 1/4” – 11 1/4” DCS-L 2508 14 198
16-130 11” – 12 3/4” DCS-L 2534 17 213
16-131 12” – 14” DCS-L 2536 17 207
NOTE: SLIP SIZES 3” – 9 1/2” FOR USE IN API OR #3 BOWL
SLIP SIZES 8 1/2” – 11 1/4” FOR USE IN #2 BOWL
SLIP SIZES 11” – 14” FOR USE IN #1 BOWL
ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” TYPE DRILL COLLAR SLIPS
REPLACEMENT PARTS FOR AOT “DCS” DRILL COLLAR SLIPS
AOT# ITEM# DESCRIPTION * SPARES SIZE #REQ. REF#. WT.
14-104 1 FRONT HANDLE 2 3” – 14” 2 3765 3.50
16-102 2 LEFT HAND SEGMENT f/DCSS 3” – 4 7/8” 1 2569 11.00
16-105 2 LEFT HAND SEGMENT f/DCSR 4 1/2” – 7” 1 2555 10.00
16-108 2 LEFT HAND SEGMENT f/DCSL 5 1/2” – 14” 1 2511 12.00
16-103 3 INTERMEDIATE SEGMENT f/DCSL 3” – 4 7/8” 5 2570 11.00
16-106 3 INTERMEDIATE SEGMENT f/DCSR 4 1/2” – 7” 7 2556 10.00
16-109 3 INTERMEDIATE SEGMENT f/DCSL 5 1/2”-8 1/4” 9 2512 12.00
16-109 3 INTERMEDIATE SEGMENT f/DCSL 8” – 9 1/2” 10 2512 12.00
16-109 3 INTERMEDIATE SEGMENT f/DCSL 8 1/2” – 10” 11 2512 12.00
16-109 3 INTERMEDIATE SEGMENT f/DCSL 9 1/4” – 11 1/4” 12 2512 12.00
16-109 3 INTERMEDIATE SEGMENT f/DCSL 11-14” 15 2512 12.00
16-104 4 RIGHT HAND SEGMENT f/DCSS 3” – 4 7/8” 1 2568 11.00
16-107 4 RIGHT HAND SEGMENT f/DCSR 4 1/2” – 7” 1 2554 10.00
16-110 4 RIGHT HAND SEGMENT f/DCSL 5 1/2” – 14” 1 2510 12.00
14-103 5 REAR HANDLE 1 3” – 10” 1 3766 4.00
14-103 5 REAR HANDLE 1 9 1/4” – 14” 2 3766 4.00
14-105 6 HANDLE PIN 3 3” – 10” 3 3769 .50
14-105 6 HANDLE PIN 3 9 1/4” – 14” 4 3769 .50
14-106 7 HINGE PIN f/DCSS 4 3” – 4 7/8” 6 2525 .70
14-106 7 HINGE PIN f/DCSR 4 4 1/2” – 7” 8 2525 .70
16-112 7 HINGE PIN f/DCSL 4 5 1/2”-8 1/4” 10 2520 .70
16-112 7 HINGE PIN f/DCSR 4 8” – 9 1/2” 11 2520 .70
16-112 7 HINGE PIN f/DCSR 4 8 1/2” – 10” 12 2520 .70
16-112 7 HINGE PIN f/DCSR 4 9 1/4” – 11 1/4” 13 2520 .70
16-112 7 HINGE PIN f/DCSR 4 11” – 14” 16 2520 .70
23-112 8 SAFETY FLEX HANDLE 3 ALL A/R N/A 4.00
- RECOMMENDED SPARE PARTS FOR 1 YEAR OF OPERATION
BUTTON INSERTS FOR AOT “DCS” DRILL COLLAR SLIPS
AOT# SLIP TYPE SIZE REF#. WT/SET QTY.
14-628 DCS S 3” – 4” 2628 13.00 49
14-620 DCS S 4”- 41/2” 2620 8.00 49
14-628 DCS R 41/2” – 6” 2628 16.00 63
14-620 DCS R 51/2” – 7” 2620 11.00 63
14-513 DCS L 51/2” – 7” 2513 19.00 88
14-630 DCS L 6 3/4” – 9 1/2” 2630 15.00 88
14-630 DCS L 8”- 91/2” 2630 16.00 96
14-627 DCS L 81/2” – 10” 2627 26.00 104
14-630 DCS L 91/4” – 11 1/4” 2630 19.00 112
14-625 DCS L 11” – 12 3/4” 2625 20.00 136
14-630 DCS L 12” – 14” 2630 22.00 136
rev 805
ALL PARTS ARE INTERCHANGEABLE WITH VARCO® “DCS” DRILL COLLAR SLIPS
RECOMMENDED SPARE PARTS INCLUDE 2 SETS OF INSERTS FOR EACH SLIP SIZE
AOT “UC-3” CASING SLIPS
The AOT “UC-3” Type Casing Slip has a 3” taper designed with a single liner per segment and a liner keeper assembly
with bolt and washer. It has a size range of 9-5/8” through 42” and is accomplished with 2 sizes of slips – 9-5/8” through
10-3/4” and
AOT# SLIP 纽ZE W / INSERTS FOR O.D. INTER. SEG. / PN R.H. SEG. / PN L.H. SEG. / PN WT. LBS.
7704-5028 10 3/4” 10 3/4” O.D. 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 160
7704-5029 10 3/4 9 5/8” O.D 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 180
7704-103 10 3/4” LESS LINERS 8 / 7704-A-31 1 / 7704-A-32 1 / 7704-A-33 130
7704-5025 13 3/8” 13 3/8” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 195
7704-5026 13 3/8” 12 3/4” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 222
7704-5027 13 3/8” 11 3/4” O.D. 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 228
7704-104 13 3/8” LESS LINERS 10 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 153
7704-5036 16” 16” O.D. 12 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 226
7704-106 16” LESS LINERS 12 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 176
7704-5034 20” 20” O.D. 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 283
7704-5035 20” 18 5/8” O.D. 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 325
7704-110 20” LESS LINERS 15 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 223
7704-5001 24” 24” O.D. 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 312
7704-5002 24” 22 1/2” O.D. 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 359
7704-5009 24” LESS LINERS 17 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 246
7704-5006 26” 26” O.D. 19 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 325
7704-5010 26” LESS LINERS 19 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 252
7704-5005 30” 30” O.D. 22 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 367
7704-5011 30” LESS LINERS 22 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 283
7704-5007 36” 36” O.D. 26 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 437
7704-5013 36” LESS LINERS 26 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 340
7704-5019 42” 42” O.D. 30 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 495
7704-5018 42” LESS LINERS 30 / 7704-A-35 1 / 7704-A-36 1 / 7704-A-37 375
REPLACEMENT PARTS FOR “UC-3” CASING SLIPS
SLIP SIZE 10 3/4，， NO. 13 3/8，， NO. 16” 20” NO. NO. 24” 26” NO. NO. 30” 36” NO. NO. 42” NO. PART WT. NO. LBS.
HANDLE 3 4 4 4 4 4 4 6 6 7704-A-17 5.5
HANDLE PIN W/COTTER 3 4 4 4 4 4 4 6 6 7704-A-16 .5
HINGE PIN W/COTTER 9 11 13 16 18 20 23 27 31 7704-B-16 .375
KEEPER ASSY. W/BOLT & WAS. 10 12 14 17 19 21 24 28 32 7704-5024 .25
BOLT & WASHER F/KEEPER AS REQUIRED 7704-5024-B .08
LINER RETAINER W/COTTER NOT REQUIRED FOR AOT UC-3 SEGMENT 7704-A-29 .25
LINERS FOR UC-3 & UC-4 CASING SLIPS
SLIP SIZE PIPE SIZE WT. LBS. P/N PIPE SIZE WT. LBS. P/N PIPE SIZE WT. LBS. P/N # REQ.
10 3/4” 10 3/4” 3 LBS. 7704-A-8 9 5/8” 5 LBS. 7704-A-9 10
13 3/8” 13 3/8” 7704-A-38 3.5 LBS. 12 3/4” 5.75 LBS. 7704-A-92 11 3/4” 6.25 LBS. 7704-A-39 12
16” 16” 3.5 LBS. 7704-A-99 14
20” 20” 3.5 LBS. 7704-A-99 18 5/8” 6 LBS. 7704-A-5000 17
24” 24” 3.5 LBS. 7704-A-99 22 1/2” 6 LBS. 7704-A-5000 19
26”-42” 26” -42” 3.5 LBS 7704-A-100 AS REQUIRED
AOT TYPE “CMSXL” & “CMS-3” CASING SLIPS
The AOT “CMSXL” & “CMS-3” Casing Slips have a multi-segment design which gives a full wrap-around to help prevent
damage to casing. By adding or subtracting segments & inserts the slip can accommodate 6 5/8” – 30” O.D. casing. The
segments are made of alloy steel and are heat-treated for strength and wear resistance, then machined to strict quality
controlled standards.
AOT “CMSXL” CASING SLIPS COMPLETE
AOT# CASING O.D. REF.# WT. COMP. TOTAL SEG. HINGE PINS INSERTS
14-111 6 5/8” 5315 196 12 11 14-628-144
14-112 7” 5301 184 12 11 14-619-144
14-113 7 5/8” 5303 166 12 11 14-630-144
14-114 8 5/8” 5305 181 13 12 14-630-156
14-115 9 5/8” 5307 192 14 13 14-630-168
14-116 10 3/4” 5309 209 15 14 14-630-180
14-117 11 3/4” 5311 260 17 16 14-627-204
14-118 13 3/8” 5313 247 18 17 14-630-216
14-119 16” 5325 308 21 20 14-631-252
14-120 18 5/8” 5333 367 25 24 14-626-300
14-121 20” 5329 383 26 25 14-631-312
14-122 24” 5331 443 30 29 14-631-360
14-123 26” 5346 486 33 32 14-631-396
14-124 30” 5342 546 37 36 14-631-444
NOTE: ALL SLIPS 9 5/8” AND LARGER ARE FURNISHED WITH 4 HANDLES. ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” CASING SLIPS.
AOT “CMS-3” TAPER CASING SLIPS
AOT# CASING O.D. WT. COMP. TOTAL SEG. HINGE PINS INSERTS
14-134 9 5/8” 178 14 13 14-513-168
14-135 10 3/4” 194 15 14 14-630-180
14-136 11 3/4” 243 17 16 14-627-204
14-137 13 3/8” 229 18 17 14-630-216
14-138 16” 287 21 20 14-631-252
14-139 18 5/8” 342 25 24 14-626-300
14-140 20” 357 26 25 14-631-312
14-141 24” 413 30 29 14-631-360
14-142 26” 453 33 32 14-631-396
14-143 30” 509 37 36 14-631-444
ALL PARTS ARE INTERCHANGEABLE W/”CMSXL” EXCEPT SEGMENTS
A ACCESS
14-106 2 HINGE PIN w/COTTER 2525 2 .60
14-100 3 RIGHT HAND SEGMENT f/CMSXL SLIP 5320 12.00
14-148 3 RIGHT HAND SEGMENT f/CMS-3” SLIP N/A 11.00
14-107 4 INTERMEDIATE SEGMENT f/CMSXL SLIP 5322 12.00
14-149 4 INTERMEDIATE SEGMENT f/CMS-3” SLIP N/A N/A 11.00
14-101 5 LEFT HAND SEGMENT f/CMSXL SLIP 5321 12.00
14-150 5 LEFT HAND SEGMENT f/CMS-3” SLIP N/A 11.00
14-104 6 FRONT HANDLE 3765 2 3.50
14-103 7 REAR HANDLE 3766 1 4.00
14-109 8 HINGE SPACER 11944 4.00
ALL PARTS ARE INTERCHANGEABLE WITH VARCO® TYPE “CMSXL” SLIPS
** RECOMMENDED SPARE PARTS FOR 1 YEAR OPERATION
*FOR RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE
AOT “CPS” CONDUCTOR PIPE SLIPS
AOT # PIPE O.D. WT. COMPLETE TOTAL SEGMENTS HINGE SPACERS INSERTS
14-244 24， 276 13 12 14-631-156
14-266 26， 296 14 13 14-631-168
14-330 30， 319 16 15 14-631-192
NOTE: ALL PARTS ARE INTERCHANGEABLE WITH “CMSXL，，SLIP
REPLACEMENT PARTS FOR “LYT” SLIP TYPE ELEVATOR
AOT# ITEM # DESCRIPTION # REQ. WT.
E28786 1 INSERT RETAINER PLATE 4 .13
E28787 2 INSERT RETAINER SCREW 2 .13
E28785 3 SETTING PLATE BOLT 2 .25
E339369-13 4 SETTING PLATE WASHER 2 .06
E28760 5 SLIP BOLT 4 .25
E28761 6 SLIP SPRING 4 .15
SETTING PLATES
AOT # ITEM # DESCRIPTION # REQ. WT.
E28782 7 2 1/16” SETTING PLATE 1 2.25
E28737 7 2” SETTING PLATE 1 2.35
E28783 7 1 1/2”（1.900”）SETTING PLATE 1 3.00
E28784 7 1 1/4”（1.660”）SETTING PLATE 1 3.10
E28736 7 1”（1.315”）SETTING PLATE 1 3.15
E28735 7 3/4”（1.050”）SETTING PLATE 1 3.20
INSERTS
AOT # ITEM # DESCRIPTION # REQ. WT.
E28772 8 2 1/16” & 2” LYT INSERT 8 .25
E28775 8 1 1/2”（1.900”）LYT INSERT 8 .25
E28778 8 1 1/4”（1.660”）LYT INSERT 8 .25
E28749 8 1”（1.315”）LYT INSERT 8 .25
E29370 8 3/4”（1.050”）LYT INSERT 8 .25
AOT 40 TON MYT SLIP TYPE ELEVATOR
AOT # DESCRIPTION SIZE OF LINKS WT.
E29328 MYT ELEVATOR COMPLETE LESS SLIP ASSEMBLY. 1 1/4” – 2 3/4” 148.00
MYT SLIP ASSEMBLIES
AOT# DESCRIPTION WT.
E29343-1 2 7/8” X 2 7/8” MYT SLIP ASSEMBLY 44.00
E29343-2 2 7/8” X 2 3/8” MYT SLIP ASSEMBLY 46.00
E29343-3 2 7/8” X 2 1/16” MYT SLIP ASSEMBLY 47.25
E29343-4 2 7/8” X 2” MYT SLIP ASSEMBLY 47.50
E29343-5 2 7/8” X 1 1/2”（1.900”）MYT SLIP ASSEMBLY 48.75
E29343-6 2 7/8” X 1 1/4”（1.660”）MYT SLIP ASSEMBLY 49.75
E29343-7 2 7/8” X 1”（1.315”）MYT SLIP ASSEMBLY 49.75
E29343-8 2 7/8” X 3/4”（1.050”）MYT SLIP ASSEMBLY. 51.00
E29343-10-S 2 7/8” MYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 31.00
rev 805 18 www.accessoiltools.com
MYT REPLACEMENT PARTS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E29333 3 HINGE PIN 1 4.00
E30652 4 LATCH 1 10.00
E29334 5 LATCH PIN 1 4.00
E29338 6 LATCH SPRING 2 1 .50
E30653 7 LATCH LOCK 1 2.00
E29335 8 LATCH LOCK PIN 2 1 .50
E29349 9 LATCH LOCK SPRING 2 1 .25
E30841 10 LATCH LOCK DOOR PIN 1 .50
E947128-120 11 LATCH PIN RETAINER 2 1 1.50
E947128-172 12 LATCH LOCK PIN RETAINER 2 1 .50
E940308-1 13 GREASE FITTING 1 .10
E30708 N/P LATCH & LATCH LOCK ASSY. 1 12.88
E29337 14 LINK BLOCK 2 1.00
E29359 15 USE P/N E939009-65 2 .13
E939009-65 16 UPPER & LOWER LINK BLOCK PIN 2 2 .45
E939484-7 17 LINK BLOCK NUT 2 2 .20
E939672-18 18 COTTER PIN 2 2 .10
E29336 19 SLIP BOLT 4 4 .75
E29340 20 SLIP SPRING 8 4 .25
E29347 21 SETTING RING SCREW 4 2 .25
E939370-13 22 SETTING PLATE WASHER 4 2 .06
E939098-15 23 INSERT RETAINER SCREW 4 2 .13
E29344 25 INSERT RETAINER PLATE 4 .50
MYT INSERTS
AOT# ITEM # DESCRIPTION # REQ. WT.
E24773 24 2 7/8” X 2 7/8” INSERT 8 .75
E29255 24 2 7/8” X 2 3/8” INSERT 8 1.00
E29256 24 2 7/8” X 2 1/16” & 2” INSERT 8 1.13
E29257 24 2 7/8” X 1 1/2”（1.900”）INSERT 8 1.25
E29258 24 2 7/8” X 1 1/4”（1.660”）INSERT 8 1.38
E29259 24 2 7/8” X 1”（1.315”）INSERT 8 1.44
E29259-1 24 2 7/8” X 3/4”（1.050”）INSERT 8 1.50
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN
MYT SETTING RINGS
AOT# ITEM # DESCRIPTION WT.
E29348 28 2 7/8” MYT SETTING RING 6.50
E29345 28 2 3/8” MYT SETTING RING 6.63
E29350 28 2 1/16” MYT SETTING RING 7.00
E29351 28 2” MYT SETTING RING 7.10
E29352 28 1 1/2”（1.900”）SETTING RING 7.35
E29353 28 1 1/4”（1.660”）MYT SETTING RING 7.50
E29354 28 1”（1.315”）MYT SETTING RING 7.90
E29354-1 28 3/4”（1.050”）MYT SETTING RING 8.05
RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN
AOT YT 75 TON SLIP TYPE ELEVATOR
AOT# DESCRIPTION SIZE OF LINKS WT.
E23105 YT ELEVATOR COMPLETE LESS SLIP ASSY. 2 1/4” – 2 3/4” 355.00
AOT# DESCRIPTION WT.
E23108-5 3 1/2” x 3 1/2” YT SLIP ASSEMBLY 64.00
E23108-3 3 1/2” x 2 7/8” YT SLIP ASSEMBLY 76.00
E23108-4 2 7/8” x 2 7/8” YT SLIP ASSEMBLY 76.00
E23108-6 2 7/8” x 2 3/8” YT SLIP ASSEMBLY 79.00
E23108-7 2 7/8” x 2 1/16” YT SLIP ASSEMBLY 81.00
E23108-8 2 7/8” x 2”（2.000”）YT SLIP ASSEMBLY 82.00
E23108-9 2 7/8” x 1 1/2”（1.900”）YT SLIP ASSEMBLY 83.50
E23108-10 2 7/8” x 1 1/4”（1.660”）YT SLIP ASSEMBLY 85.50
E23108-11 2 7/8” x 1”（1.315”）YT SLIP ASSEMBLY 86.50
E23108 3 1/2” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 51.00
E23108-2 2 7/8” YT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 51.00
YT REPLACEMENT PARTS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E23116-1 3 HINGE PIN 1 4.13
E15348 4 LATCH 1 27.00
E24182 5 LATCH PIN 1 5.00
E12978 6 LATCH SPRING 2 1 .63
E12946 7 LATCH CAM 1 1.50
E12972 8 LATCH LOCK 1 3.50
E13530 9 LATCH LOCK PIN 2 1 .63
E12529 10 DOOR LUG PIN 1 .65
E29464 11 LATCH PIN RETAINER 2 1 .20
E940308-1 12 GREASE FITTING 1 .10
E940308-8 13 GREASE FITTING 1 .10
E9519 14 LINK BLOCK 2 5.50
E8151 15 UPPER LINK BLOCK PIN, NUT & COTTER 2 .50
E8145 16 LINK BLOCK BOLT 2 2 1.19
E8150 17 LINK BLOCK NUT 2 2 .25
E939672-19 18 COTTER PIN 2 2 .10
E23115 19 SLIP BOLT 4 4 1.25
E23113 20 SLIP SPRING 8 4 .25
E23630 21 GUIDE PLATE 1 4.00
E939098-75 22 GUIDE PLATE SCREW 2 2 .25
E939352-64 23 GUIDE PLATE LOCKWASHER 2 2 .15
E27697 24 SETTING PLATE BOLT 8 4 .25
E27532 25 INSERT RETAINER SCREW 8 4 .06
E27546 26 SETTING RING RETAINER (3 1/2”） 2 2 .13
E27507 26 SETTING RING RETAINER (2 7/8”） 2 2 .13
E27696 27 RUBBER BUSHING 8 4 .06
E24507 28 INSERT SPACER (3 1/2”） 8 8 .13
E24508 28 INSERT SPACER ( 2 7/8”） 4 4 .25
E27530 31 INSERT RETAINER (3 1/2”） 4 .13
E27451 31 INSERT RETAINER (2 7/8”） 4 .25
YT INSERTS
AOT# ITEM # DESCRIPTION # REQ. WT.
E24774 30 3 1/2” X 3 1/2” INSERT 24 .50
E30358 30 3 1/2” X 2 7/8” INSERT 24 .75
E24773 30 2 7/8” X 2 7/8” INSERT 12 .75
E29255 30 2 7/8” X 2 3/8” INSERT 12 1.00
E29256 30 2 7/8” X 2 1/16” & 2” INSERT 12 1.20
E29257 30 2 7/8” X 1 1/2”（1.900”）INSERT 12 1.25
E29258 30 2 7/8” X 1 1/4”（1.660”）INSERT 12 1.38
E29259 30 2 7/8” X 1”（1.315”）INSERT 12 1.45
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO RUN
YT SETTING RINGS
AOT# ITEM # DESCRIPTION WT.
E27813 33 3 1/2” YT SETTING RING 3.13
E27695 33 2 7/8” YT SETTING RING 3.56
E27694 33 2 3/8” YT SETTING RING 4.00
E27812 33 2 1/16” YT SETTING RING 4.25
E28821 33 2” YT SETTING RING 4.25
E27811 33 1 1/2”（1.900”）YT SETTING RING 4.31
E27810 33 1 1/4”（1.660”）YT SETTING RING 4.38
E29001 33 1”（1.315”）YT SETTING RING 4.75
RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE
AOT HYT 150 TON SLIP TYPE ELEVATOR AOT # DESCRIPTION RANGE SIZE OF LINKS WT.
E39284 HYT ELEVATOR COMPLETE L/SLIPS 2 3/8” – 3 1/2” 2 1/4” – 3 1/2” 740
HYT SLIP ASSEMBLIES
AOT # DESCRIPTION WT.
E39258-2 3 1/2” X 3 1/2” HYT SLIP ASSY. 170
E39258-4 3 1/2” X 2 7/8” HYT SLIP ASSY. 170
E39259-2 2 7/8” X 2 7/8” HYT SLIP ASSY. 170
E39259-4 2 7/8” X 2 3/8” HYT SLIP ASSY. 170
E39174 3 1/2” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 150
E39175 2 7/8” HYT SLIP SEGMENTS ONLY (MATCHED SET OF 4) 150
HYT REPLACEMENT PARTS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E39239 3 HINGE PIN 1 12.40
E39162 4 LATCH 1 22.00
E39238 5 LATCH PIN 1 6.00
E39240 6 LATCH SPRING 2 1 .70
E39161 7 LATCH LOCK 1 1 8.00
E39251 8 LATCH LOCK PIN 1 1 .80
E39241 9 LATCH LOCK SPRING 2 1 .70
E39253 10 HINGE PIN RETAINER 1 .10
E39254 11 LATCH PIN RETAINER 1 .40
E940308-1 12 GREASE FITTING 1 .10
E9519 13 LINK BLOCK 2 5.50
E8151 14 UPPER LINK BLOCK BOLT, NUT, & COT. 2 .50
E8145 15 LINK BLOCK BOLT 2 2 .50
E8150 16 LINK BLOCK NUT 2 2 .15
E939672-19 17 COTTER PIN 2 2 .10
E52321 18 SLIP BOLT 4 4 1.00
E52539-1 19 SLIP SPRING 8 4 .80
E51090 20 GUIDE PLATE 1 8.60
E939098-65 21 GUIDE PLATE SCREW 4 2 .10
E939352-64 22 GUIDE PLATE LOCKWASHER 4 2 .10
E94787923 LOCKWIRE A/R .10
E939098-96 24 HEX HEAD CAPSCREW 2 .65
E939352-6 25 LOCKWASHER 4 .10
E51089 26 SETTING RING BUSHING 4 2 .15
E939098-36 27 HEX HEAD CAPSCREW 4 2 .20
E39247 30 3 1/2” & 3 1/2” X 2 7/8” INSERT RET. 8 4 .25
E39246 30 2 7/8” & 2 7/8” X 2 3/8” INSERT RET. 8 4 .25
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
HYT INSERTS
AOT# ITEM # DESCRIPTION # REQ. WT.
E24774 29 3 1/2” X 3 1/2” INSERT 32 .50
E30358 29 3 1/2” X 2 7/8” INSERT 32 .75
E24773 29 2 7/8” X 2 7/8” INSERT 16 .75
E29255 29 2 7/8” X 2 3/8” INSERT 16 1.00
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN
HYT SETTING RINGS
AOT# ITEM # DESCRIPTION # REQ. WT.
E39214-3 31 3 1/2” HYT SETTING RING 1 11.00
E39214-2 31 2 7/8” HYT SETTING RING 1 11.00
E39214-1 31 2 3/8” HYT SETTING RING 1 13.00
rev 805
RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN
REPLACEMENT PARTS FOR YC SLIP TYPE ELEVATOR
AOT# ITEM # DESCRIPTION # REQ. WT.
E30214 1 INSERT RET. RING 3 1/2” – 4 1/2” 4 2.75
E30224 1 INSERT RET. RING 5” & 5 /2” 4 2.13
E30230 1 INSERT RET. RING 6 5/8” & 7” 4 2.75
E941286-73 2 INSERT RET. SCREW 4 .13
E30211 3 SETTING PLATE BOLT 4 .25
E30213 4 RUBBER BUSHING 4 .06
E30216 5 SETTING RING RET. 2 .25
E24076 6 SLIP BOLT 4 1.05
E24049 7 SLIP SPRING 4 .38
E24075 8 GUIDE PLATE SCREW w/NUT 4 .40
E93948-8 9 GUIDE PLATE NUT 4 .10
E24506 10 INSERT SPACER 8 .25
SETTING PLATES
AOT # ITEM # DESCRIPTION # REQ. WT.
E34932 11 3 1/2” SETTING PLATE 1 8.00
E30209 11 4” SETTING PLATE 1 8.00
E30219 11 4 1/2” SETTING PLATE 1 7.00
E30220 11 5” SETTING PLATE 1 6.25
E30223 11 5 1/2” SETTING PLATE 1 6.13
E30226 11 6 5/8” SETTING PLATE 1 6.00
E30229 11 7” SETTING PLATE 1 5.50
BOTTOM GUIDE PLATES
AOT # ITEM # DESCRIPTION # REQ. WT.
E24071-2 12 7” BOTTOM GUIDE 2 3.75
E24071-3 12 6 5/8” BOTTOM GUIDE 2 4.50
E24071-1 12 5 1/2” BOTTOM GUIDE 2 5.50
E24071 12 5” BOTTOM GUIDE 2 7.75
E24071-4 12 4 1/2” BOTTOM GUIDE 8.50
E26827 12 4” BOTTOM GUIDE 2 8.50
E26827-1 12 3 1/2” BOTTOM GUIDE 2 8.00
■應 ACCESS
AOT HYC 200 TON SLIP TYPE ELEVATOR
AOT# DESCRIPTION RANGESIZE OF LINKS WT.
E55310 HYC ELEVATOR COMPLETE L/SLIPS & BOTTOM GUIDES 3 1/2” – 7 5/8” 2 1/4” – 3 1/2” 978.00
HYC SLIP ASSEMBLIES
AOT# DESCRIPTION WT.
E70009 7 5/8” X 7 5/8” HYC SLIP ASSY. 216
E55515 7” X 7” HYC SLIP ASSY. 224
E55514 7” X 6 5/8” HYC SLIP ASSY. 227
E55513 5 1/2” X 5 1/2” HYC SLIP ASSY. 243
E55512 5 1/2” X 5” HYC SLIP ASSY. 253
E55511 4 1/2” X 4 1/2” HYC SLIP ASSY. 265
E55510 4 1/2” X 4” HYC SLIP ASSY. 268
E55509 4 1/2” X 3 1/2” HYC SLIP ASSY. 274
E55305-1 7 5/8” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 176
E55305 7” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 184
E55304 5 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF4) 200
E55303 4 1/2” HYC SLIP SEGMENTS ONLY (MATCHED SET OF 4) 212
HYC REPLACEMENT PARTS
AOT# ITEM # DESCRIPTION **SPARES # REQ. WT.
E55311 1 HINGE PIN 1 25.00
E55503 2 LATCH 1 47.00
E55312 3 LATCH PIN 1 9.00
E34909 4 LATCH SPRING 2 1 1.50
E13185 5 LATCH SPRING STOP 1 .25
E13152 6 LATCH LOCK 1 1 4.00
E15101 7 LATCH LOCK BOLT 1 1 .75
E13188 8 LATCH LOCK SPRING 2 1 .25
E8150 9 LATCH LOCK BOLT NUT 1 1 .25
E939672-19 10 COTTER PIN 1 1 .10
E13190 11 DOOR LUG PIN 1 .65
E55504 12 HINGE PIN RETAINER 1 .35
E55505 13 LATCH PIN RETAINER 1 .20
E940308-1 14 GREASE FITTING 1 .10
E9519 15 LINK BLOCK 2 5.50
E8151 16 UPPER LINK BLOCK BOLT, NUT, & COT. 2 2 .50
E8145 17 LINK BLOCK BOLT 2 2 1.19
E8150 18 LINK BLOCK NUT 2 2 .25
E939672-19 19 COTTER PIN 2 2 .10
E24076 20 SLIP BOLT 4 4 1.00
E939354-6 21 LOCKWASHER 4 4 .25
E945044-2 22 SLIP SPRING 8 4 .35
E55508 23 GUIDE PLATE SCREW 8 4 .26
E939484-5 24 GUIDE PLATE NUT 8 4 .03
E939672-17 25 COTTER PIN 8 4 .10
E30216 26 SETTING RING RETAINER (3 1/2” – 7”） 2 2 .25
E70147 26 SETTING RING RETAINER ( 7 5/8”） 2 2 .30
E55501 27 SHOULDER SCREW 8 4 .41
E55502 28 RUBBER BUSHING 8 4 .04
E941286-73 29 INSERT RETAINER SCREW 4 4 .08
E947879 30 LOCK WIRE A/R .01
E70011 31 7 5/8” INSERT RETAINER 4 1.85
E30230 31 7” INSERT RETAINER 4 2.00
E30227 31 6 5/8” INSERT RETAINER 4 2.00
E30224 31 5 1/2” INSERT RETAINER 4 2.50
E30221 31 5” INSERT RETAINER 4 2.25
E30214 31 4 1/2” – 3 1/2” INSERT RETAINER 4 2.50
1 YEAR SPARES, FOR 2 YEARS SPARES ADD 1 EA. OF * THESE ITEMS
HYC INSERTS
AOT# ITEM # DESCRIPTION # REQ. WT.
E70010 32 7 5/8” X 7 5/8” INSERT 48 .50
E16407 32 7” X 7” INSERT 48 .50
E24748 32 7” X 6 5/8” INSERT 48 .75
E16407 32 5 1/2” X 5 1/2” INSERT 36 .50
E24783 32 5 1/2” X 5” INSERT 36 .80
E24785 32 5 1/2” X 4 1/2” INSERT 36 1.05
E16408 32 4 1/2” X 4 1/2” INSERT 24 .50
E24781 32 4 1/2” X 4” INSERT 24 .80
E24779 32 4 1/2” X 3 1/2” INSERT 24 1.00
RECOMMENDED SPARES INCLUDE 1 SET OF INSERTS FOR EACH PIPE SIZE TO BE RUN
HYC SETTING RINGS
AOT# ITEM # DESCRIPTION # REQ. WT.
E70012 33 7 5/8” HYC SETTING RING 1 11.00
E55522 33 7” HYC SETTING RING 1 11.50
E55521 33 6 5/8” HYC SETTING RING 1 12.00
E55520 33 5 1/2” HYC SETTING RING 1 13.00
E55519 33 5” HYC SETTING RING 1 14.50
E55518 33 4 1/2” HYC SETTING RING 1 15.00
E55517 33 4” HYC SETTING RING 1 16.50
E55516 33 3 1/2” HYC SETTING RING 1 18.00
RECOMMENDED SPARES INCLUDE 2 SETTING RINGS FOR EACH PIPE SIZE TO BE RUN
HYC BOTTOM GUIDE PLATES
AOT# ITEM # DESCRIPTION # REQ. WT.
E24071-6 34 7 5/8” HYC BOTTOM GUIDE PLATES (SET) 1 5.02
E24071-2 34 7” BOTTOM GUIDE 2 3.75
E24071-3 34 6 5/8” BOTTOM GUIDE 2 4.50
E24071-1 34 5 1/2” BOTTOM GUIDE 2 5.50
E24071 34 5” BOTTOM GUIDE 2 7.75
E24071-4 34 4 1/2” BOTTOM GUIDE 2 8.50
E26827 34 4” BOTTOM GUIDE 2 8.50
E26827-1 34 3 1/2” BOTTOM GUIDE 2 8.00
RECOMMENDED SPARES INCLUDE 1 SET BOTTOM GUIDES FOR EACH PIPE SIZE TO BE RUN
BASIC TYPE INSERTS FOR BJ® ELEVATORS
YC THROUGH 1000 TON
AOT# SLIP SIZE PIPE SIZE (OD) YC 7 5/8” 175 TON NUMBER OF INSERTS REQ. 13 3/8” 13 3/8” 10 3/4” 14” 350 500 500 1000 TON TON TON TON WT. EA.
E16441 31/2” 31/2” 18 .50
E16442 4” 4” 16 .50
E16408 41/2” 41/2” 16 27 .50
E16407 51/2” 51/2” 16 27 36 45 45 .50
E16407 7” 7” 24 48 60 60 .50
E16407 7 5/8” 7 5/8” 45 60 75 75 .50
E15660 8 5/8” 8 5/8” 60 75 .50
E15660 8 7/8” 8 7/8” 108 .50
E15660 9 5/8” 9 5/8” 72 90 90 .50
E15660 10 3/4” 10 3/4” 72 90 .50
E15660 10 7/8” 10 7/8” 126 .50
E15660 11 3/4” 11 3/4” 72 105 .50
E15660 12 1/2” 12 1/2” 144 .50
E15660 13 3/8” 13 3/8” 84 135 .50
E15660 14” 14” 162 .50
REDUCING INSERTS FOR BJ® ELEVATORS
YC THROUGH 1000 TON
AOT # SLIP 纽ZE PIPE 纽ZE (OD) YC 7 5/8” 175 TON NUMBER OF INSERTS REQ. 1 13 3/8”13 3/8”10 3/4”14” 350 500 500 1000 TON TON TON TON WT. EA.
E25780 31/2” 2 7/8” 18 .85
E24777 31/2” 2 3/8” 18 1.20
E24781 41/2” 4” 16 27 .80
E24779 41/2” 31/2” 16 27 1.00
E24783 51/2” 5” 16 27 36 45 45 .80
E24785 51/2” 41/2” 16 27 36 45 45 1.05
E24748 7” 6 5/8” 24 48 60 60 .75
E25474 7 5/8” 6 5/8” 45 60 75 75 1.05
E26750 7 5/8” 7” 45 60 75 75 .90
E25474 8 5/8” 7 5/8” 45 60 75 1.05
E39290 8 7/8” 7 5/8J 108 1.20
E39286 8 7/8” 8 5/8” 108 .65
E25474 9 5/8” 8 5/8” 72 90 90 1.05
E33249 10 3/4” 9 5/8” 72 90 1.15
E39290 10 7/8” 9 5/8” 126 1.30
E39285 10 7/8” 10 3/4” 126 .60
E25474 11 3/4” 10 3/4” 72 105 126 1.05
E39289 12 1/2” 11 3/4” 144 .90
E32700 14” 13 3/8” 162 .90
INSERTS FOR VARCO® ELEVATORS/SPIDERS
AOT# DESCRIPTION REF# SLIP SIZE PIPE SIZE (OD) 75/8” 200 TON 14，， 350 TON 14” NUMBER OF INSERTS REQUIRED 500 750 1000 500 750 TON TON TON TON TON 14” 24”^ 24” 24”
23-157 REDUCER 2160 31/2” 2 3/8” 12/12B
23-156 REDUCER 2161 31/2” 2 7/8” 12/12B
23-155 BASIC 2162 31/2” 31/2” 24
23-160 REDUCER 2163 41/2” 31/2” 16/16B
23-159 REDUCER 2164 41/2” 4” 16/16B
23-158 BASIC 2165 41/2” 41/2” 32
23-163 REDUCER 2168 51/2” 41/2” 16/16B 24/16B 32/16B
23-165 REDUCER 2169 51/2” 5” 16/16B 24/16B 32/16B
23-164 BASIC 2170 51/2” 51/2” 32 40 48
23-168 REDUCER 2632 7 5/8” 6 5/8” 24/24B36/24B 48/24B 60/24B
23-169 REDUCER 2623 7 5/8” 7” 24/24B36/24B 48/24B 60/24B
23-170 BASIC 2633 7 5/8” 7 5/8” 48 60 72 84
23-171 REDUCER 2640 9 5/8” 8 5/8” 48/32B 64/32B80/32B 96/24B
23-170 BASIC 2633 9 5/8” 9 5/8” 48/32B 64/32B 80/32B 96/24B
23-171 REDUCER 2640 11 3/4” 10 3/4” 60/40B 80/40B 100/40B144/36B
23-172 BASIC 2637 11 3/4” 11 3/4” 100 120 140 180
23-172 BASIC 2637 13 3/8” 13 3/8” 100 120 140
23-173 REDUCER 2636 14” 13 3/8” 60/40B 80/40B 100/40B144/36B
23-174 BASIC 2635 14” 14” 100 120 140 180
23-174 BASIC 2635 16” 16” 240 180 210
23-175 REDUCER 13868 20” 18 5/8” 720 420 510
23-174 BASIC 2635 20” 20” 300 180 210
23-174 BASIC 2635 24” 24” 180 210