Foster Style Tongs 5893R

Foster Style Tongs 5893R            
Foster Style Backup 5893R           

Item # Part Number Description Approx. Weight (lbs) Qty Required
1 Backup Tool Assembly 121.8 1
2 Backup Tool Assembly with Air Cylinder 126 1
3 11-131 Grease Fitting 1/4″-28 0.01 7
4 11-145 Stover Locknut, 5/8″-11 NC 0.02 2
5 11-196 Lockwasher, 3/8″ 0.01 10
6 11-321 90° Elbow, 1/4″ (male to female) 0.2 2
7 11-683 Hex Head Capscrew, 3/8″ x 1-1/4″ 0.05 10
8 Stover Locknut, 3/8″ 0.02 10
9 11-806 Lockwasher, 5/8″ 0.02 2
10 11-878 Allen Head Capscrew, 1/2″ x 1″ 0.03 2
11 High Collar Lockwasher, 1/2″ 0.02 2
12 11-995 Allen Head Screw, 1/2″ x 1-1/4″ 0.03 12
13 11-1335 Dowel Pin, 1/2″ x 1-1/2″ 0.01 5
14 11-1575 Hex Head Capscrew, 5/8″ x 3-1/2″ 0.02 2
15 12-126 1 Wire Air Hose 18″ Long, 1/4″ Male Pipe Both ends 0.2 1
16 Air Hose Quick Connect, 1/4″ (male end) 0.01 1
17 1 Wire Hose 5-1/2″ Long, 1/4″ Male Pipe x 1/4″ JIC Female Swivel 0.8 2
18 90° Elbow, 1/4″ Pipe to 1/4″ Male JIC 0.2 2
19 50-49-2 Insert Screw, 3/8″ x 1-1/8″ 0.02 10
20 105-100 Backup Air Cylinder Assembly 4 1
21 Air Cylinder Clevis Pin, 1/2″ x 1-3/4″ 0.03 2
22 Cotter Pin, 1/8″ x 1-1/4″ 0.01 2
23 121-10 Backup Return Spring 0.07 1
24 147-1-1 Backup Ring Gear with Handles 10.6 1
25 147-2-10 Top Cap(6-1/4″ Bore) 21.6 1
26 Backup Housing with Arm 51.8 1
27 147-6 Backup Jaw Pin 0.4 5
28 147-7 Backup Jaw, 2-3/8″ to 3-3/4″ 2.41 5
29 Backup Jaw Assembly, 2-3/8″ to 3-3/4″ 3 5
30 147-19 Backup Housing Adapter 5.8 1
31 147-20 Backup Swivel Block 9.4 1
32 147-40 Front Positioner 6.6 1
33 147-41 Back Positioner 9.2 1
34 147-43 Front and Back Pull Pin, 1/2″ x 4-3/4″ 0.2 2
35 195-6 Backup Push-Pull Air Valve Assembly 2.2 1
36 50-48-1 Insert 0.4 5
37 11-920 Safety Pin 0.01 2
Foster Style Clutch Assembly 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 50-13-1 Clutch Assembly 18.41 1
2 819-1 Anchor Pin 0.03 1
3 819-5 Split Ring 0.01 4
4 819-9 Pressure Plate 0.56 2
5 819-10 Inner Disc 0.25 12
6 819-11 Outer Disc 0.13 14
7 819-12 Thrust Plate 1.2 2
8 819-13 Adjustment Collar 0.6 2
9 819-14 Spring Pin 0.02 6
10 819-16 Separating Spring 0.02 6
11 819-17 Dog 0.1 6
12 819-18 Dog Pivot 0.02 6
13 Shipper Sleeve Pin 0.03 6
14 819-20 Clutch Body 4.2 1
15 819-21 Shipper Sleeve 3.6 1
16 Clutch Pack Kit (PN 819-9 thru 819-14, 819-16) 9.44 2
Foster Style Hanger Extension Assembly 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 58-60-4 Hanger Extension Assembly 46 1
2 58-71 Compression Spring 0.4 4
3 58-72 Spring Guide 0.1 8
4 58-91-1 Compression Spring Bolt 2 2
5 Compression Spring Bolt Assembly 4.4 2
6 11-803 Nut, 3/4″ 0.13 6
7 123-27 Pull Pin, 3/4″ x 8-1/2″ (not part of Assembly) 1 2
8 11-920 Safety Pin 0.01 2
Foster Style Lift Assembly 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 Hydraulic Lift Assembly 210 1
2 11-145 Stover Locknut, 5/8″-11 NC 0.02 2
3 11-806 Lockwasher, 5/8″ 0.02 2
4 58-71 Compression Spring 0.4 2
5 58-72 Spring Guide 0.1 8
6 58-91-1 Compression Spring Bolt 2 2
7 Compression Spring Bolt Assembly 4.4 2
8 11-803 Nut, 3/4″ 0.13 6
9 123-27 Pull Pin, 3/4″ x 8-1/2″ (not part of assembly) 1 2
10 11-112 Hex Head Capscrew, 5/8″ x 2-1/4″ 0.01 4
11 11-148 Operating Rod Shackle, 1/2″ (Clevis) 0.6 1
12 11-317 High Pressure Street Elbow, 3/8″ 0.2 1
13 11-353 O-Ring 0.01 1
14 11-355 O-Ring 0.01 1
15 11-356 O-Ring 0.01 3
16 11-361 O-Ring 0.01 1
17 11-816 Retainer Ring 0.01 1
18 11-1076 Castle Nut, 1-1/2 NF 0.6 1
19 11-1153 Cotter Pin, 1/4″ x 3″ 0.01 1
20 12-130 Lift Hose, 8″ 2.2 1
21 123-1-1 Top Lift Cap 7.6 1
22 Top Lift Cap Assembly 9.4 1
23 123-2-1 Working Barrel 104 1
24 123-3-1 Operating Rod 88 1
25 123-4 Cup Retainer 0.2 1
26 123-4-1 Cup Retainer 0.1 1
27 123-5-1 Cup 0.01 2
28 123-9 Piston 0.8 1
29 123-10 Bumper Washer 0.01 1
30 123-13-7 Bottom End Assembly 31.2 1
31 123-20 Lift Repair Kit 0.2 1
32 123-23 Brass Bushing 1.4 1
33 123-26 Oil Seal 0.6 1
34 126-7 Cushion Spring 19 1
35 136-8-1 Spring Housing 49 1
36 11-920 Safety Pin 0.01 2
Foster Style Transmission Assembly 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 11-603 Hex Head Cap Screw, 3/8″ x 1-1/4″ 0.06 18
2 11-604 Hex Head Cap Screw, 3/8″ x 3/4″ 0.05 6
3 11-113 Allen Head Cap Screw, 3/8″ x 1″ 0.03 2
4 11-124 Transmission Plate Dowel Pin, 5/16″ x 3/4″ 0.02 4
5 11-176 Hi-Pro Key No. 18 0.01 2
6 11-200 Hex Head Capscrew, 5/16″ x 3/4″ 0.04 12
7 11-299 Drain Petcock Fitting 0.03 1
8 11-349 O-ring 0.02 1
9 11-436 90° Elbow Fitting, 5/16″ Ferrule to 1/8″ Pipe (Brass) 0.05 1
10 Allen Set Screw, 3/8″ x 1/2″ 0.01 1
11 11-572 Allen Head Cap Screw, 5/16″ x 3/4″ NF 0.05 6
12 11-662 Hex Head Cap Screw, 5/16″ x 1/2″ 0.02 20
13 11-900 Spirolox Ring 0.01 3
14 11-1043 Hex Head Cap Screw, 3/8″ x 1-1/4″ 0.02 16
15 11-1132 Cotter Pin, 1/8″ x 1-3/4″ 0.01 1
16 11-1186 Hi-Pro Key 0.02 6
17 11-1492 Hex Head Cap Screw, 1/2″ x 2-1/4″ 0.2 2
18 18507 High Clutch Gear 3.8 1
19 18599 Low Clutch Gear 10.4 1
20 50-13-1 Clutch Assembly 18.41 1
21 50-20 Ring Gear and Pinion 6.2 1
22 50-28-3 Shifting Fork 4.4 1
23 50-32-1 Bearing Assembly (PN 50-32-1A, 50-32-1B) 1.4 3
24 50-45-1 Bearing Spacer 0.01 2
25 50-83 Ring & Pinion Shim 0.01 1
26 50-193 Shifting Yoke 0.6 1
27 56-81 Oil Sight Gauge 0.02 1
28 21459 High Drive Gear 4 1
29 58-14-2 Clutch Shaft 8.8 1
30 58-17-3 Transmission End Plate 12 1
31 58-23 Bottom Bearing Cap 3.4 1
32 58-23-1 Top Bearing Cap with Hole 3.2 1
33 58-25 Bearing 0.33 4
34 58-27-10 Clutch Lever with Shaft 8.2 1
35 58-29-1 Back Bearing Cap 3.4 1
36 58-37 Motor Gasket 0.01 1
37 58-137-1 Pinion Spacer 0.06 1
38 119-202 Oil Pump Assembly 4 1
39 58-255 Transmission End Plate Gasket 0.01 1
40 58-259 Bearing Cap Gasket 0.01 1
41 58-261 Bearing Cap Gasket 0.01 2
42 58-295 Side Cover Plate 1.4 2
43 58-363-1 Castle Nut, 1″ 0.1 1
44 O-Ring Gasket 0.03 2
45 58-400 Gasket Set 0.01 1
46 71-200 Ring Gear Gasket 0.01 1
47 77-90 Hydraulic Motor (standard) 41.8 1
48 77-90-2 Hydraulic Motor (High Torque) 43.5 1
49 92-183 Bearing Assembly 1 1
50 Motor Adapter Gasket (thin) 0.01 3
51 Motor Adapter Gasket (thick) 0.01 1
52 34274 Drive Shaft 5.3 1
53 93-18 Ring Gear Cover 8 1
54 93-19 Ring Gear Hub and Sprocket 11.9 1
55 93-32 Bearing Assembly 2.5 1
56 93-37-2 Motor Adapter 3.2 1
57 93-114 Oil Pump Discharge Line 0.06 1
58 93-115 Oil Line 0.02 1
59 93-125 Counter Balance Assembly 176 1
60 93-166 Hex Head Cap Screw, 3/8″ x 1″ 0.1 14
61 93-183 Bearing Assembly 0.5 1
62 93-251 Chain Side Cover Plate Gasket 0.01 1
63 93-295-1 Chain Side Cover Plate 3.7 1
64 58-143-1 Oil Pump Gear 0.4 1
65 11-595 Oil Pump Gear Set Screw, 5/16″ x 1/2″ 0.01 2
66 11-196 Lockwasher. 3/8″ 0.01 10
67 11-321 90° Elbow, 1/4″ (Male to Female) 0.2 2
Foster Style Transmission Assembly 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 11-603 Hex Head Cap Screw, 3/8″ x 1-1/4″ 0.06 18
2 11-604 Hex Head Cap Screw, 3/8″ x 3/4″ 0.05 6
3 11-113 Allen Head Cap Screw, 3/8″ x 1″ 0.03 2
4 11-124 Transmission Plate Dowel Pin, 5/16″ x 3/4″ 0.02 4
5 11-176 Hi-Pro Key No. 18 0.01 2
6 11-200 Hex Head Capscrew, 5/16″ x 3/4″ 0.04 12
7 11-299 Drain Petcock Fitting 0.03 1
8 11-349 O-ring 0.02 1
9 11-436 90° Elbow Fitting, 5/16″ Ferrule to 1/8″ Pipe (Brass) 0.05 1
10 Allen Set Screw, 3/8″ x 1/2″ 0.01 1
11 11-572 Allen Head Cap Screw, 5/16″ x 3/4″ NF 0.05 6
12 11-662 Hex Head Cap Screw, 5/16″ x 1/2″ 0.02 20
13 11-900 Spirolox Ring 0.01 3
14 11-1043 Hex Head Cap Screw, 3/8″ x 1-1/4″ 0.02 16
15 11-1132 Cotter Pin, 1/8″ x 1-3/4″ 0.01 1
16 11-1186 Hi-Pro Key 0.02 6
17 11-1492 Hex Head Cap Screw, 1/2″ x 2-1/4″ 0.2 2
18 18507 High Clutch Gear 3.8 1
19 18599 Low Clutch Gear 10.4 1
20 50-13-1 Clutch Assembly 18.41 1
21 50-20 Ring Gear and Pinion 6.2 1
22 50-28-3 Shifting Fork 4.4 1
23 50-32-1 Bearing Assembly (PN 50-32-1A, 50-32-1B) 1.4 3
24 50-45-1 Bearing Spacer 0.01 2
25 50-83 Ring & Pinion Shim 0.01 1
26 50-193 Shifting Yoke 0.6 1
27 56-81 Oil Sight Gauge 0.02 1
28 21459 High Drive Gear 4 1
29 58-14-2 Clutch Shaft 8.8 1
30 58-17-3 Transmission End Plate 12 1
31 58-23 Bottom Bearing Cap 3.4 1
32 58-23-1 Top Bearing Cap with Hole 3.2 1
33 58-25 Bearing 0.33 4
34 58-27-10 Clutch Lever with Shaft 8.2 1
35 58-29-1 Back Bearing Cap 3.4 1
36 58-37 Motor Gasket 0.01 1
37 58-137-1 Pinion Spacer 0.06 1
38 119-202 Oil Pump Assembly 4 1
39 58-255 Transmission End Plate Gasket 0.01 1
40 58-259 Bearing Cap Gasket 0.01 1
41 58-261 Bearing Cap Gasket 0.01 2
42 58-295 Side Cover Plate 1.4 2
43 58-363-1 Castle Nut, 1″ 0.1 1
44 O-Ring Gasket 0.03 2
45 58-400 Gasket Set 0.01 1
46 71-200 Ring Gear Gasket 0.01 1
47 77-90 Hydraulic Motor (standard) 41.8 1
48 77-90-2 Hydraulic Motor (High Torque) 43.5 1
49 92-183 Bearing Assembly 1 1
50 Motor Adapter Gasket (thin) 0.01 3
51 Motor Adapter Gasket (thick) 0.01 1
52 34274 Drive Shaft 5.3 1
53 93-18 Ring Gear Cover 8 1
54 93-19 Ring Gear Hub and Sprocket 11.9 1
55 93-32 Bearing Assembly 2.5 1
56 93-37-2 Motor Adapter 3.2 1
57 93-114 Oil Pump Discharge Line 0.06 1
58 93-115 Oil Line 0.02 1
59 93-125 Counter Balance Assembly 176 1
60 93-166 Hex Head Cap Screw, 3/8″ x 1″ 0.1 14
61 93-183 Bearing Assembly 0.5 1
62 93-251 Chain Side Cover Plate Gasket 0.01 1
63 93-295-1 Chain Side Cover Plate 3.7 1
64 58-143-1 Oil Pump Gear 0.4 1
65 11-595 Oil Pump Gear Set Screw, 5/16″ x 1/2″ 0.01 2
66 11-196 Lockwasher. 3/8″ 0.01 10
67 11-321 90° Elbow, 1/4″ (Male to Female) 0.2 2
Foster Style Tubing Tong 5893R
Item # Part Number Description Approx. Weight (lbs) Qty Required
1 Hydraulic Powered Tubing Tong 1450 1
2 11-147 Drag Ring Set Screw, 1″ x 1″ 0.02 5
3 Top Bearing Cap Dowel Pin 3/8″ x 7/8″ 0.02 1
4 11-324 Square Head Pipe Plug 1-1/4″ 0.2 2
5 11-601 Allen Head Pipe Plug 1/2″ 0.08 1
6 11-603 Hex Head Cap Screw 3/8″ x 1-1/4″ 0.06 18
7 11-604 Hex Head Cap Screw 3/8″ x 3/4″ 0.05 6
8 11-632 Hex Head Cap Screw 3/8″ x 1-1/2″ 0.06 6
9 Long Insert Screw with Nut 0.03 10
10 11-859 Square Head Set Screw 3/8″ x 1-1/2″ 0.06 2
11 11-1160 Hex Head Cap Screw, 3/8″ x 2-1/2″ 0.1 12
12 18477 Drag Ring Jaw Pin 1.2 5
13 50-15-2 Drag Ring Assembly, 5″ bore, 1″ Pin 40.2 1
14 50-22-7 Jaw, 2-3/8″ x 3-1/2″ 4.4 5
15 Jaw Assembly, 2-3/8″ x 3-1/2″ 5.6 5
16 50-57 Drag Ring Spring 0.02 5
17 50-58 Drag Ring Plug 0.01 5
18 58-47 Oil Seal 0.8 2
19 58-100 Wear Band 0.4 2
20 58-256 Top Bearing Cap Gasket 0.01 1
21 58-263 Bottom Bearing Cap Gasket 0.01 2
22 34003 Top Bearing Cap 50.2 1
23 34061 Final Drive Gear 105 1
24 34096 Guide Bell, 5″ Bore 32.2 1
25 pull Pin, 3/4″ x 5-1/2″ 0.8 2
26 34151 Roller Bearing 10.6 2
27 93-13 Base Ring 0.6 2
28 93-25 Bottom Bearing Race 32.72 1
29 93-26 Roller Chain Assembly 16.6 1
30 93-30 Seal Protector 0.8 1
31 93-122 Hanger Cover Plate 3.4 1
32 93-161 Cover Plate, 1″ Pin Hole, 5″ Bore 17.8 1
33 93-285 Drag Ring Sleeve 17.6 1
34 93-286-1 Bottom Bearing Cap 35.2 1
35 93-287-3 Bottom Bearing Cap Assembly (PN 11-196, 11-632, 93-285, 93-286-1) 53.54 1
36 854-8 Roller Chain Master Link 0.4 1
37 Case 232 1
38 50-149-6-100 Jaw and Insert Assembly, 1-5/16″ to 1.9″, 1″ Pin Hole 5.26 5
39 50-149-6 Jaw, 1-5/16″ to 1.9″, 1″ Pin Hole 4.8 5
40 50-48-5 Insert 0.2 10
41 58-330-100 Jaw and Insert Assembly, 2-1/16″ to 2-3/8″, 1″ Pin Hole 6.06 5
42 58-330 Jaw, 2-1/16″ to 2-3/8″, 1″ Pin hole 5.6 5
43 58-328 Insert 0.2 10
44 50-22-11 Jaw and Insert Assembly, 3-1/2″ to 4-1/2″, 1″ Pin Hole 4.03 5
45 Jaw, 2-7/8″ to 5″, 1″ Pin Hole 3 5
46 Insert, 3-1/2″ to 4-1/2″ 1 5
47 Insert Screw, 3/8″ x 2-5/8″ with Nut, 3/8″ 0.03 5
48 58-160-2 Drag Ring Assembly, 6-1/4″ bore, 1″ Pin 34.8 1
49 34100 Guide Bell, 6-1/4″ Bore 31 1
50 93-161-3 Cover Plate, 6-1/4″ Bore, 1″ Pin Hole 15.4 1
51 50-22-12 Jaw and Insert Assembly, 4″ to 5″, 1″ Pin hole 4.53 5
52 Insert, 4″ to 5″ 1.5 5
53 58-314 Jaw (Solid), 5″ to 6-1/16″, 1″ Pin hole 4 5
54 58-154-2 Jaw and Insert Assembly, 4″ to 4-1/2″, 3/4″ Pin hole 3.03 5
55 Jaw,4″ to 5-1/2″, 3/4″ Pin hole 1.8 5
56 Insert, 4″ to 4-1/2″ 1.8 5
57 Insert Screw, 5/16″ x 2-5/8″ with Nut, 5/16″ 0.03 5
58 58-160-1 Drag Ring Assembly, 7-1/4″ Bore, 3/4″ Pin 25.8 1
59 34101 Guide Bell, 7-1/4″ Bore 30.1 1
60 93-161-1 Cover Plate, 7-1/4″ Bore, 3/4″Pin Hole 12.2 1
61 Insert, 5″ to 5-1/2″ 0.6 5
62 58-336 Jaw (Solid) 6-5/8″, 5/8″ Pin Hole 4.3 10
63 58-332-2 Drag Ring Assembly, 7-7/8″ Bore, 5/8″ Pin, 10 Pin 25.8 1
64 34103 Guide Bell, 7-7/8″ Bore 30 1
65 93-161-8 Cover Plate, 7-7/8″ Bore, 5/8″Pin Hole, 10 Pin 12 1
66 58-331 Jaw (Solid) 7″ , 5/8″ Pin Hole 3 10
67 21398 Drag Ring Jaw Pin, 3/4″ x 6-1/4″ 0.6 5
68 58-57 Drag Ring Plug 0.03 5
69 50-57-1 Drag Ring Spring 0.05 5
70 11-583 Drag Ring Set Screw 0.06 5
71 50-58-1 Drag Ring Plug 0.6 5
72 21763 Drag Ring Jaw Pin, 5/8″ x 6″ 0.9 5
73 59-64 Drag Ring Plug 0.03 5
74 59-53 Drag Ring Spring 0.02 5
75 11-131 Grease Fitting 1/4″-28 0.01 7
76 11-196 Lockwasher, 3/8″ 0.01 10
77 11-683 Hex Head Cap Screw, 3/8″ x 1-1/4″ 0.05 10
78 Stover Locknut, 3/8″ 0.02 10
79 50-48-1 Insert 0.4 5
80 11-920 Safety Pin 0.01 2