HT400 Plunger Pump Parts List 2202 - DrillingBase.comDrillingBase.com

Table 4.1- -Worm Gear Drive-End Assembly
Loc SAP PN Legacy No. Qty Description
1 100007816 316.11631 2 Gasket, Worm Housing Input End
2 100058137 316.11619 1 Retainer, Bearing, Worm-Drive End
3 100058140 316.11625 1 Bearing, Drive End-Worm Shaft
3a 100058139 316.11620 1 Inner Race for 316.11625
4 100029186 70.46241 1 Seal, Oil, 53-in. x 7448, Fl, 4-in. B x 5 1/2-in. OD x 1/2-in. Wide
5 100058134 316.11615 1 Cover, Oil Seal Retainer
6 100029874 70.58806 4 Washer, Flat, 3/8-in. WI, Pl
7 13431 70.43839 4 Screw Hex Socket, 3/8-in.16NC x 1 1/4-in., Unbrako/Loc- Wel
8 100054533 280.03021 1 Flange, Companion, 1810 Series, 3.0 – 10 Spline
9 100058133 316.11613 1 Washer, Worm Yoke Retainer
10 100058132 316.11611 1 Washer, Lock, Worm Yoke Retainer
11 100028455 70.43816 2 Screw, Hex Cap, 3/8-in. 16UNC x 1 1/4-in., Pl

Cone Drive (8.4:1) Worm Gear Thrust End Assembly

Loc SAP PN Legacy No. Qty Description
1 100058310 316.16416 1 Plug, Orifice, 1/8-in. NPT, 0.157-in. Diameter Hole
2 100028380 70.43680 12 Screw, Hex Socket, 1/2-in. 13UNC x 5 1/2-in., Drilled Head
3 100058235 316.13200 1 Plate, thrust, bearing retainer modified for plunger lube pump
4 100015435 8.34062 2 O-Ring, 90D, 8, 7 3/4-in. x 1/8-in.
5 100011748 317.51064 1 Adapter, HQ, Worm Shaft, Plunger Lube
6 100058150 316.11667 as req. Shim, Clearance, Worm Thrust Bearing, 0.003 in.
7 100011686 316.11669 as req. Shim, Clearance, Worm Thrust Bearing, 0.005 in.
8 100011687 316.11671 as req. Shim, Clearance, Worm Thrust Bearing, 0.010 in.
9 100011688 316.11673 as req. Shim, Clearance, Worm Thrust Bearing, 0.020 in.
10 100058210 316.13100 1 Nut, Lock, HT400, worm thrust end, nut and star washer
11 100058142 316.11629 1 Bearing, Thrust, Stack Worm
12 100058144 316.11633 1 Bushing, Worm Thurst Bearing
13 100058145 316.11634 1 Key, Worm-Thrust Bearing
14 100058141 316.11627 1 Bearing, Thrust-End, Worm Shaft
15 100058147 316.11645 1 Retainer, Iron Worm-Thrust End Bearing
Loc SAP PN Legacy No. Qty Description
16 100015435 8.34062 2 O-Ring, 90D, 8, 7 3/4-in. x 1/8-in.
17 100058249 316.13253 as req. Shim, 0.005-in., Worm Positioning
18 100058250 316.13254 as req. Shim, 0.010-in., Worm Positioning
19 100058251 316.13255 as req. Shim, 0.020-in., Worm Positioning
20 100057938 315.31154 1 Key, Worm-Thrust Bearing Spacer
21

100058285   316.13522   1   Worm, Gear, 8.4 to 1 Ratio, Cone Drive Plunger Lube Pump Assembly

Worm Gear Thrust-End Assembly

Description

Screw, Cap, Worm Housing, RH Nut, Elastic Stop, 1/2-13 NC, Heavy, PL Pump, Assembly, Oil, 100 GPM, Tuthill, HT-400™ PE Stud, Long Loc Insert, Tuthill Oil Pump Mounting O-Ring, 90 Duro 7 3/4 X 7 1/2 X 1/8, 568-264 Shim, Clearance, Worm Thrust Bearing, 0.003 in. Shim, Clearance, Worm Thrust Bearing, 0.005 in. Shim, Clearance, Worm Thrust Bearing, 0.010 in. Shim, Clearance, Worm Thrust Bearing, 0.020 in. Nut, Lock, HT400, Worm Thrust End, Nut and Star Washer

Adapter, Brown and Sharp Lubricator Pump Bearing, Thrust, Stack Worm Bushing, Worm Thurst Bearing Key, Worm-Thrust Bearing

Loc SAP Part No. Legacy No. Qty
1 100011699 316.13657 8
2 100012919 70.32821 4
3 100011684 316.11637 1
4 100058267 316.13306 4
5 100013727 8.34061 1
6 100058150 316.11667 as req
7 100011686 316.11669 as req
8 100011687 316.11671 as req
9 100011688 316.11673 as req
10 100058210 316.13100 1
11 100058146 316.11644 1
12 100058142 316.11629 1
14 100058144 316.11633 1
13 100058145 316.11634 1

Table 4.3—Holroyd (8.6:1) Worm Gear Thrust-End Assembly

Description

Bearing, Thrust-End, Worm Shaft Retainer, Iron Worm-Thrust End Bearing O-Ring, 90D, 8, 7 3/4-in. x 1/8-in.

Key, Worm-Thrust Bearing Spacer

Gear, Worm, 8.6:1 Ratio, Holroyd, HT-400™ PE

Loc SAP Part No. Legacy No. Qty
15 100058141 316.11627 1
16 100058147 316.11645 1
17 100015435 8.34062 1
18 100057938 315.31154 1
19 100058130 316.11601 1

Ring Gear Subassembly (A)

Description

Pin, Cotter, 1/8-in. x 1 1/2-in., Spring Steel Nut, Hex Slot, 1-in. 14NF, Pl Screw, Cap, Spline Drive Wire, Stove Pipe, 19 Ga., 72-in. Long Spider, Crankshaft Thrust Retainer Bushing, Spider Spacer Shim, Positioning, Crankshaft Axial, 0.020-in. Shim, Positioning, Crankshaft Axial, 0.040-in. Shim, Positioning, Crankshaft Axial, 0.060-in. Coupling, Crankshaft, Spline Drive Wire, Stove Pipe, 19 Ga., 190-in. Long Screw, Cap, Ring, Mounting, Gear Clamp Washer, Left-Hand Gear Bearing Clamp Rod, Welding, L-61, 1/8-in., 95-in. Long Connector, No. 8, 128-B Reliance Flange, Gear Spline Drive

Loc SAP Part No. Legacy No. Qty
1 100027204 70.35712 1
2 100026544 70.32970 1
3 100058092 316.11407 4
4 100030594 70.62391 1
5 100058107 316.11521 1
6 100058105 316.11519 1
7 100058100 316.11512 as req
8 100058104 316.11518 as req
9 100058109 316.11522 as req
10 100058110 316.11523 1
11 100030594 70.62391 1
12 100058111 316.11524 24
13 100058125 316.11548 24
14 100028108 70.42965 1
15 100023759 70.17324 1
16 100058127 316.11551 1

Table 4.4—Ring Gear Subassembly (A)

Description

Adapter, Clamp Ring, HT-400™, PE, Right-Hand Only

Screw, Cap, Worm Housing, Right-Hand

Wire, Stove Pipe, 19 Ga., 120-in. Long

Ring, Thrust, Gear Bearing

Shim, Clearance, Gear Support Bearing, 0.003-in.

Shim, Clearance, Gear Support Bearing, 0.005-in.

Shim, Clearance, Gear Support Bearing, 0.010-in.

Shim, Clearance, Gear Support Bearing, 0.020-in.

Loc SAP Part No. Legacy No. Qty
17 100058128 316.11553 1
18 100011699 316.13657 16
19 100030594 70.62391 1
20 100058123 316.11545 1
21 100058117 316.11535 as req
22 100058118 316.11537 as req
23 100058119 316.11539 as req
24 100058121 316.11541 as req

Ring Gear Subassembly (B)

Loc SAP Part No. Legacy No. Qty Description
25 100058122 316.11543 1 Bearing, Gear Support
25a 100058120 316.1154 2 Thrust Cage Assembly for 316.11543
26a 100058284 316.13521 1 Gear, Ring, 8.4 to 1 Ratio, Cone Drive Use only with Cone Drive worm gear (100058285).
26b 100058103 316.11517 1 Gear, Ring, 8.6 to 1 Ratio Holroyd

Use only with Holroyd worm gear (100058130)

27 100058129 316.11556 24 Lug, Gear Bearing Clamp, Right Hand Only
28 100028108 70.42965 1 Rod, Welding, L-61, 1/8-in., 95-in. Long, Right Hand Only
29 100058111 316.11524 24 Screw, Cap, Ring Mounting, Gear Clamp, Right Hand Only
30 100023759 70.17324 1 Connector, No. 8, 128-B Reliance, Right Hand Only
31 100028247 70.43381 16 Screw, Hex Socket, 1/2-in. 13NC x 1 1/4-in.
32 100029934 70.58986 16 Washer, Lock, 1/2-in., Int Shakeproof, Pl
33 100058112 316.11525 1 Support, Bearing, Ring Gear
34 100058113 316.11527 as req Shim, Positioning, Gear Side, 0.003-in.
35 100058114 316.11529 as req Shim, Positioning, Gear Side, 0.005-in.

Description

Shim, Positioning, Gear Side, 0.010-in.

Shim, Positioning, Gear Side, 0.020-in.

Screw, Cap, Spline Drive

Wire, Stove Pipe, 19 Ga., 24-in. Long

Washer, Lock, 1/2-in., Stl-Pl

Stud, Flanged, Crankshaft Thrust

Rod, Welding, L-61, 1/8-in., 54-in. Long, Right

Hand Only

Loc SAP Part No. Legacy No. Qty
36 100058115 316.11531 as req
37 100058116 316.11533 as req
38 100058092 316.11407 2
39 100030594 70.62391 1
40 100081184 70.58959 4
41 100058101 316.11514 1
42 100028108 70.42965 1

Crankshaft Main Bearing Subassembly

Description

Bearing, Main Outboard Bearing, Main Inboard

Washer, Flat, SAE 5/16, 11/32 ID, 11/16 OD, 1/16 Thk, Stl

Washer, Outer Race, Crankshaft, Main Bearing, HQ Screw, Hex Socket, 5/16-in. 18NC x 1-in.

Nut, Elastic Stop, 5/16-in. 18NC, Heavy, Pl Screw, Cap, Inboard Bearing Race Retainer Screw, Hex Cap, 1/2-in. 13NC x 2 3/4-in.

Loc SAP Part No. Legacy No. Qty
1 100058283 316.13503 2
2 100058282 316.13501 2
3 101384369 4
4 100058709 317.51017 12
5 100002166 70.43363 4
6 100026483 70.32811 4
7 100058266 316.13304 4
8 100028496 70.43877 3

Table 4.6—Crankshaft Main Bearing Subassembly

Description

Washer, Bearing Retainer, Forged

Washer, Retainer, Inner Race, Heavy-Duty Main

Bearing

Nut, Self-Locking, 1/2-in. 13NC x 3 1/2-in., Pl Screw, Hex Cap, 1/2-in. 13NC x 3 1/2-in., Pl Crankshaft Assembly, Machined, +0.125, No Nitride

Loc SAP Part No. Legacy No. Qty
9 100058095 316.11505 15
10 100058233 316.13198 6
11 100030907 70.70309 12
12 100028494 70.43875 6
13 100058898 317.55208 1

Crosshead and Connecting Rod Subassembly

Description

Screw, FH Cap, 1/4-in. 20NC x 5/8-in., Hex Socket

Shoe Top, Crosshead

Shim, Crosshead Shoe, Top, 0.003-in.

Shim, Crosshead Shoe, Top, 0.005-in.

Shim, Crosshead Shoe, Top, 0.010-in.

Shim, Crosshead Shoe, Top, 0.020-in.

Crosshead, Heavy Duty

Shim, Bottom Crosshead, 0.005-in.

Shim, Bottom Crosshead, 0.010-in.

Shoe Bottom, Crosshead

Nut, Elastic Stop, 5/16-in. 24NF, LT, 21NE-054

Screw, Cap, Retaining, Crosshead Pin

Washer, Dished

Key, Crosshead Pin

Pin, Crosshead

Loc SAP Part No. Legacy No. Qty
1 100138092 70.4319 18
2 100058170 316.11819 3
3 100058172 316.11823 as req
4 100058171 316.11821 as req
5 100058173 316.11825 as req
6 100058174 316.11827 as req
7 100002817 316.13811 3
8 100058180 316.11847 *
9 100058181 316.11848 *
10 100058175 316.11832 3
11 100026445 70.32721 3
12 100058176 316.11833 3
13 100057933 315.1193 6
14 100011690 316.11831 6
15 100002813 316.11829 3

Table 4.7—Crosshead and Connecting Rod Subassembly

Description

Connecting Rod, Forging, Machined

Bushing, Connecting-Rod Pin

Screw, Connecting-Rod

Washer, Connecting-Rod Cap

Helicoil Insert, No. 1185, 12-in. x 1 7/8-in. Long

Bearing, Bottom, Connecting Rod, + 0.125,

HQ2000

Bearing, Top, Connecting Rod, + 0.125, HQ2000

Dowel, Connecting-Rod Cap

Wire, Stove Pipe, 19 Ga., 144-in. Long

Loc SAP Part No. Legacy No. Qty
16 100011691 316.11910 3
16a 100058186 316.11913 3
16b 100058184 316.11911 12
16c 100058185 316.11912 12
16d 100025800 70.27196 12
17 100011758 317.55214 3
18 100011759 317.55215 3
19 100057932 315.11416 3
20 100030594 70.62391 1

Crosshead Slide Subassembly

Table 4.8—Crosshead Slide Subassembly

Loc SAP Part No. Legacy No. Qty
1 100028805 70.44781 8
2 100028806 70.44782 8
3 100058286 316.13802 4
4 100058164 316.11805 4
5 100058166 316.11807 4
6 100058169 316.11817 4
7 100058161 316.11801 3
8 100058162 316.11803 3

Description

Screw, Set, 1/4-in. 20NC x 1/4-in., Cup Pt, Hex Socket Pl

Screw, Set, 1/4-in. 20NC x 3/4-in., Cup Pt, Hex Socket Pl

Clamp, Outboard, Crosshead Slide Foot, Right-Hand Crosshead Slide Clamp Screw, Crosshead Slide Clamp Foot, Left-Hand Crosshead Slide Clamp Slide, Top Crosshead Slide-Bottom, Crosshead

Table 4.8—Crosshead Slide Subassembly (Continued)

Loc SAP Part No. Legacy No. Qty Description
9 100058177 316.11834 as req Shim, Crosshead Slide, 0.002-in.
10 100058178 316.11835 as req Shim, Crosshead Slide, 0.005-in.
11 100058179 316.11836 as req Shim, Crosshead Slide, 0.010-in.

Schroeder Filter/Strainer Lubrication Subassembly

Table 4.9—Schroeder Filter/Strainer Lubrication Subassembly

Loc SAP Part No. Legacy No. Qty
1a 100058197 316.11964 1
1b 100058198 316.11965 1
1c 100011694 316.11932 1
1d 100058200 316.11966 1
1e 100001377 70.00427 1
1f 100058195 316.11963 1
2 100028439 70.43786 6
3 100015040 70.58952 8
4 100000966 8.34031 2
5 100029873 70.58805 6

Description

Cap, By-Pass, Schroeder Oil System Screw, Adjust, Bypass, Schroeder Oil System Spring, Bypass, Oil Pressure 80 to 100 psi Gasket, Cap, Screw, Bypass, Schroeder Oil Systems Ball, Steel, 2-in., Chrome Steel, Grade 50 Body, Valve, Bypass, Schroeder Oil System Screw, Hex Cap, 5/16-in.18NC x 1-in., Plated Washer, Lock, 5/16-in., Stl, Pl O-Ring, 90D, 3 1/4-in. x 3-in. x 1/8-in.

Washer, Flat, 5/16-in., Wi, Pl

Table 4.9—Schroeder Filter/Strainer Lubrication Subassembly (Continued)

Loc SAP Part No. Legacy No. Qty
6 100058193 316.11959 1
7 100028485 70.43864 16
8 100081184 70.58959 16
9 100021413 70.06262 1
10 100021412 70.06260 1
11 100000961 8.34022 4
12 100024782 70.23477 4
13 100036060 70.97198 1
14 100058298 316.14147 1
15 100023268 70.15975 1
16 100028435 70.43781 4
17 100013115 70.76708 35

Description

Manifold, Oil Strainer and Filter, Machined

Screw, Hex Cap, 1/2-in.13NC x 1-in., Pl

Washer, Lock, 1/2-in., Stl, Pl

Strainer, Oil, Magnetic Element, 100 gpm, 300 psi

Filter, Oil, 100 gpm, 300 psi

O-Ring, 90D, 2 1/8-in. x 1 7/8-in. x 1/8-in.

Flange, Half, 1 1/2-in., 3,000 psi, SF-2522-24 Adapter, Hose, Straight, 1 5/8-12 JIC Male x 1.5 C61 Flange Head

Bracket, Schroeder, Filter Clamp, Exhaust, 4 1/2-in., Stemco Screw-Hex Cap, 5/16-in. 18NC x 1/2-in., Pl Washer, Seal, 5/16-in., Barwood

Power-End Lubrication Hose/Line Subassembly

8H10J

16H19

Description

Gauge, Oil Pressure, 0 to 150 lb, Microswitch Bracket, Heat Indicator, Murphy Gauge Bracket, Gauge, Oil Temp and Press-Schroeder Screw, Hex Cap, 3/8-in. 16NC x 1-in., Pl Washer, Lock, 3/8-in., Stl, Pl Washer, Flat, 3/8-in. WI, Pl Nut, Hex, 3/8-in. 16NC, Pl Screw, Hex Cap, 1/2-in.13NC x 1 1/2-in., Pl Washer, Lock, 1/2-in., Stl, Pl

Loc SAP Part No. Legacy No. Qty
1 100002493 70.88352 1
2 100049565 270.08673 1
3 100058080 316.11188 1
4 100013017 70.43814 2
5 100013059 70.58955 2
6 100029874 70.58806 2
7 100012921 70.32912 2
8 100028488 70.43868 2
9 100081184 70.58959 2

Table 4.10—Power-End Lubrication Hose/Line Subassembly

Description

Nut, Hex, 1/2-in. 13NC, Pl

Hose Assembly, Lube Pressure, HT-400™ Power

End

Hose Assembly, Gear Support Bearing Lube, HT- 400™ Power End

Hose Assembly, Thrust Bearing Lube, HT-400™ Power End

Adapter, Hose, 070102-4-2C, 7-16-20 JIC Male x 1/ 8-27 NPT Male, Steel Coupling, 1/8 NOM 27V, Standard, Steel Adapter, Hose, Straight, 9/16-18 JIC Male x 3/8-18 NPT Male, Steel

Adapter, Hose, Tee, 2 x 9/16-18 JIC Male x 9/16-18 JIC SWVL FML, STL

Adapter, Hose, Straight, 7/16-20 JIC Male X 3/8-18 NPT Male, Steel

Adapter, Hose, Elbow, 9/16-18 JIC Male x 9/16-JIC SWVL FML, STL

Adapter, Hose, Straight, 9/16-18 JIC Male X 1/4-18 NPT Male, Steel

Plug, Orifice, 1/8 NPT, 0.157 Dia Hole

Tube, Oil Line, General, HT-400™ Pump Power End,

(Includes Rubber Lines and Fittings)

Bolt, Saddle, Crosshead Oiler Washer, Seal, 1/2-in.

Saddle, Oil Line, Crosshead Oiler O-Ring, 90D, 1 1/16-in. x 7/8-in. x 3/32-in.

Loc SAP Part No. Legacy No. Qty
10 100026525 70.32914 2
11 100058261 316.1328 1
12 100058262 316.13282 1
13 100058263 316.13283 1
14 100025591 70.26634 1
15 100016618 27.00101 1
16 100025640 70.26763 2
17 100031391 70.72665 1
18 100025641 70.26764 1
19 100012853 70.26364 3
20 100025596 70.26644 1
21 100058310 316.16416 1
22 101284157 1
23 100011692 316.11917 3
24 100002324 70.72129 6
25 100011693 316.11918 6
26 100000946 8.33929 6

Crankshaft Lubricator Subassembly

Description

Nut, 63121, Thread Protector, 7/8-in., S-W Gasket, Drive-Adapter Cap, Gallon Counter Screw, Hex Cap, 5/16-in. 18NC x 1-in., Pl Washer, Lock, 5/16-in., Stl, Pl Injector, Oil, Crankshaft, With llb 20 Adapter Gasket, Injector, Crankshaft Oil, With No. 20 Adapter

O-Ring, 90D, 9/16-in. x 3/8-in. x 3/32-in.

Shaft, Drive, Gallon Counter Ring, Retaining, 5000, 156-H, Int, Truarc Ring, Retaining, UR-165-S, Stnls, Spirolox (Used on pre-1981 pumps)

Seal, Magnetic Shaft, MSC-65152, Rev B Bushing, Magnetic Seal, Insulator & Counter Drive

Loc SAP Part No. Legacy No. Qty
1 100010084 106.53475 1
2 100057942 315.32351 1
3 100028439 70.43786 4
4 100015040 70.58952 4
5 100011695 316.13197 1
6 100011700 316.16414 1
7 100001944 70.33947 1
8 100002816 316.13308 1
9 100028033 70.42144 1
9a 100013005 70.42128 1
10 100013035 70.45847 1
11 100002821 316.14142 1

Table 4.11 —Crankshaft Lubricator Subassembly

Case Cover Subassembly

Table 4.12—Case Cover Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100028435 70.43781 97 Screw-Hex Cap, 5/16-in. 18NC x 1/2-in., Pl
2 100013115 70.76708 67 Washer, Seal, 5/16-in., Barwood
3 100058273 316.13321 1 Cover, Long, Crosshead Slide
4 100011698 316.13323 1 Gasket, Long Cover, Crosshead Slide
5 100058237 316.13210 1 Plate, Cover, Oil Injector
6 100009528 316.13301 1 Gasket, Oil Injector, Cover Plate
7 100009677 70.58981 16 Washer, Lock, 5/16-in., Internal, Shakeproof, Pl
8 100029873 70.58805 12 Washer, Flat, 5/16-in., Wi, Pl
9 100058086 316.11344 2 Cover, Connecting Rod Access
Loc SAP Part No. Legacy No. Qty Description
10 100011682 316.11345 3 Gasket, Connecting Rod Access Cover
11 100011696 316.13244 1 Cover Assembly, Con Rod Access, W/4 1/4-in. OD Filler Neck
12 100002844 70.12486 1 Cap, Filler, Wisco, Vented
13 100002815 316.13249 1 Dipstick, Oil, 4 1/4-in. OD Filler Neck
14 100058070 316.11143 1 Cover, Inspection, Gear
15 100011680 316.11144 1 Gasket, Cover, Inspection Gear
16 100058084 316.11311 1 Cover, Plate, Gear Housing
17 100002810 316.11313 1 Gasket, Cover Plate, Gear
18 100058085 316.11315 1 Baffle, Inside, Gear Housing
19 100058271 316.13317 1 Cover, Short Crosshead Slide
20 100011697 316.13319 1 Gasket, Short Cover, Crosshead Slide
21 100058208 316.131 1 Power-End Case, Machined, Right-Hand Drive
21 100058299 316.161 1 Power-End Case, Machined, Left-Hand Drive

L-2 Spacer Subassembly

Table 4.13—L-2 Spacer Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100002811 316.11621 12 Nut, 1-14 NF, Internal Wrenching, 1.03 Thread Length
2 3 See Plunger Subassembly For Plunger Adapter Part No.
3 100002833 316.21066 3 Retainer, Push Rod, HT-400™, Two Piece Nose, L- Spacer
4 100000959 8.34020 3 O-Ring, 90 Duro, 1 7/8 x 1 5/8 x 1/8, 568-223
5 100002832 316.21065 3 Push Rod, Two Piece, L-Spacer, HT-400™
6 100002971 316.25166 3 Tie Rod, Push Rod, L-Spacer, HT-400™
7 100058516 316.25168 1 Spacer, L-Frame, Machined, HT-400™ FE & PE
8 100058513 316.25100 1 Guard Assembly, HT-400™, L-2 Spacer
9 100011067 106.63914 2 Hinge, DR-35, Latch, Hood, Bassick
10 100026633 70.33263 4 Nut, Clip, 10-24, Steel With Bright Green Finish
Loc SAP Part No. Legacy No. Qty Description
11 100028741 70.44540 4 Screw, Round Head, Machine, No 10-24 NC x 3/8, PL
12 100029918 70.58947 4 Washer, Lock, #10 ST Plated
13 100013017 70.43814 12 Screw, Hex Cap, 3/8-16 NC x 1, PL, Spec 70.43917
14 100013059 70.58955 12 Washer, Lock, 3/8, Steel, PL, Spec
15 100002804 316.10012 3 Retainer, Push Rod Seal Housing, L-2 Spacer, HT- 400™ Pump
16 100001903 70.33739 3 O-Ring, 70 Duro, 5 11/16 x 5 1/2 x 3/32 568-161
17 100002805 316.10013 3 Housing, Push Rod Seal, Floating, L-2 Spacer, HT- 400™
18 100002806 316.10014 6 Seal, Push Rod, L-Spacer, HT-400™
19 100002968 316.24923 12 Stud, Attaching, Fluid End to Power End, L Spacer, HT- 400™ Pump

Table 4.14—L-4 Spacer Subassembly
Loc SAP Part No. Legacy No. Qty Description
1 100002811 316.11621 12 Nut, 1-14 NF, Internal Wrenching, 1.03 Thread Length
2

100002833   316.21066   3

See Plunger Subassembly For Plunger Adapter Part No.

Retainer, Push Rod, HT-400™, Two Piece Nose, L- Spacer

4 100000959 8.34020 3 O-Ring, 90 Duro, 1 7/8 x 1 5/8 x 1/8, 568-223
5 100002832 316.21065 3 Push Rod, Two Piece, L-Spacer, HT-400™
6 100002971 316.25166 3 Tie Rod, Push Rod, L-Spacer, HT-400™
7 100058500 316.24926 12 Tube, Frame, L-4 Spacer

Loc SAP Part No. Legacy No. Qty Description
8 100009593 316.25101 1 Guard Assembly, HT-400™, L-4 Spacer
9 100011068 106.63915 2 Fastener, Bar, Hood, Bassick, DH-40
10 100026443 70.32708 4 Nut, Elastic Stop, 10-32 NF
11 100028197 70.43289 4 Screw, Hex Socket, #10-32 NF x 1/2, SS
12 100029949 70.59015 4 Washer, Lock, #10 SS
13 100058335 316.21253 2 Mount, Latch, Guard, Aluminum Spacer, HT-400™ Pump
14 100023243 70.15877 4 Clamp, Hose, SAE #36, 1 7/16 – 2 3/4
15 100028439 70.43786 9 SCREW, HEX CAP, 5/16-18 NC X 1, PL,
16 100015040 70.58952 9 Washer, lock 5/16 , Steel Pl
17 100002818 316.14070 3 Retainer, Push Rod Seal Housing, L4 Spacer, HT- 400™
18 100002025 70.34106 3 O-Ring, 70 Duro, 4 15/16 X 4 3/4 X 3/32 568-158
19 100002819 316.14072 3 Housing, Push Rod Seal, Floating, L4 Spacer, HT400
20 100002806 316.10014 6 Seal, Push Rod, L-Spacer, HT-400™
21 100058501 316.24927 1 Plate, PE, Steel, HT-400™, L-Spacer
22 100002968 316.24923 12 Stud, Attaching, Fluid End to Power End, L Spacer, HT- 400™ Pump

Suction Valve Subassembly

Description

Retainer, Stop and Spring, HT400, No. 3 Suction Valve, Mach. Cast.

Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac

Spring, Lock, Suction Stop, No. 3, HT400 Pin, Cotter, 1/8 x 1 1/2 Inch, HT-400™

Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass

Loc SAP Part No. Legacy No. Qty
1 100058419 316.22977 3
2 100002972 316.25233 6
3 100002841 316.2125 3
4 100002079 70.35717 6
5 100002868 316.22005 6

Table 6.1 —3-3/8- and 4.0-inch (No. 3) Suction Valve Subassemblies

Table 6.1 —3-3/8- and 4.0-inch (No. 3) Suction Valve Subassemblies (Continued)

Loc SAP Part No. Legacy No. Qty Description
6 100002867 316.22004 6 Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac
7 100002837 316.2108 6 Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/ in
8 100002824 316.21007 6 Valve, HT400, 3.38, 4.0 In, Frac
9 101333083 316.21048 6 Insert, Valve, HT400, No. 3 Frac, Urethane, Frac Service (Yellow) Acid/
9 100002823 316.21006 6 Insert, Valve, HT400, No. 3 Frac, Urethane, dard Service (Brown) Stan-
10 100002825 316.21008 6 Seat Valve, HT400, No. 3 Frac, Tapered
11 100000968 8.34037 6 O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240
12 100002838 316.21096 6 Retainer, Guide Bushing, HT400, 3.38, 4.0 Tapered Seat Bore Inch,

Table 6.2—4-1/2-inch (No. 4) Suction Valve Subassemblies

Loc SAP Part No. Legacy No. Qty Description
1 100058432 316.23034 3 Retainer, Stop and Spring, HT400, No. 4 Suction Valve, Mach. Cast.
2 100002972 316.25233 6 Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac
3 100007270 316.22252 3 Spring, Lock, Suction Stop, No. 4, HT400
5 100002868 316.22005 6 Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass
6 100002867 316.22004 6 Insert, Two Piece Bushing, Valve Guide, Special, HT- 400™, No 4 Frac
7 100002936 316.2308 6 Spring, Valve, HT400, No. 4, 4.5 Inch, 25 lb/in
8 100002875 316.22048 6 Valve, HT400, 4.5 inch, Frac
9 101333104 316.22046 6 Insert, Valve, HT400, No. 4 Frac, Urethane, Acid/ Frac Service (Yellow)
9 100002876 316.22049 6 Insert, Valve, HT400, No. 4 Frac, Urethane, Standard Service (Brown)
10 100002874 316.22047 6 Seat Valve, HT400, No. 4 Frac, Tapered
11 100000970 8.34041 6 O-ring, 90 Duro, 4 1/2 x 4 1/4 x 1/8, 568-244
12 100002955 316.23953 6 Retainer, Guide Bushing, HT400, No. 4, Tapered Seat Bore

Table 6.3—5.0- and 6.0-inch (No. 5) Suction Valve Subassemblies

Loc SAP Part No. Legacy No. Qty
1 100058542 316.25840 3
2 100002972 316.25233 6
3 100002882 316.22253 3
5 100002870 316.22007 6
6 100002869 316.22006 6
7 100058597 316.27259 6
8 100002960 316.24027 6
9 101349952 316.24026 6
9 100002961 316.24037 6
10 100002957 316.24024 6
11 100000974 8.34045 6
12 100002962 316.24043 6

Description

Retainer, Stop and Spring, HT400, No. 5 Suction Valve, Mach. Cast.

Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac

Spring, Lock, Suction Stop, No. 5, HT400

Liner, Two Piece Bushing, Valve Guide, HT400, No.5

Frac, Brass

Insert, Two Piece Bushing, Valve Guide, Special, HT- 400™, No 5 Frac

Spring, Valve, HT400, No. 5, Conical, Stainless, 50 lb/ in

Valve, HT400, No. 5, 5.0 and 6.0 inch, Frac Insert, Valve, HT400, No. 5 Frac, Urethane, Acid/Frac Service (Yellow)

Insert, Valve, HT400, No. 5 Frac, Urethane, Standard Service (Brown)

Seat Valve, HT400, No. 5 Frac, Tapered O-ring, 90 Duro, 5 3/16 x 5 x 3/32, 568-159 Retainer, Guide Bushing, HT400, No. 5, Tapered Seat Bore

Fluid-End Discharge Valve Subassembly

Loc SAP Part No.
1 100008186
2 100002836
3 100002830
4 100002829
5 100002868
Legacy No. Qty Description
316.2102 3 Retainer, Cover, HT-400™, 3.38 in.
316.2107 3 Cover, Discharge, Double Guided Valve, HT-400™, 3.38 in.
316.21052 3 Gasket, Discharge Valve & Cylinder Head Cover, 3.38 in., HT- 400™
316.21051 3 Ring, Spacer, Discharge Valve & Cylinder Head Cover, 3.38 in., HT-400™
316.22005 6 Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass
Loc SAP Part No. Legacy No. Qty Description
6 100002867 316.22004 6 Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac
7 100002837 316.2108 3 Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/in
8 100002824 316.21007 3 Valve, HT400, 3.38, 4.0 In, Frac
9 101333083 316.21048 3 Insert, Valve, HT400, No. 3 Frac, Urethane, Acid/Frac Service (Yellow)
9 100002823 316.21006 3 Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)
10 100002825 316.21008 3 Seat Valve, HT400, No. 3 Frac, Tapered
11 100000968 8.34037 3 O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240
12 100002838 316.21096 3 Retainer, Guide Bushing, HT400, 3.38, 4.0 Inch, Tapered Seat Bore

Table 6.5—4-inch Fluid-End Discharge Valve Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100007820 316.2202 3 Retainer, Cover, HT-400™, 4.0 in.
2 100002938 316.23091 3 Cover, Discharge, Double Guided Valve, HT-400™, 4.0 and 4.5 in.
3 100002878 316.22052 3 Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400™
4 100002877 316.22051 3 Ring, Spacer, Discharge Valve & Cylinder Head Cover, No.4, HT- 400™
5 100002868 316.22005 6 Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass
6 100002867 316.22004 6 Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac
7 100002837 316.2108 3 Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/in
8 100002824 316.21007 3 Valve, HT400, 3.38, 4.0 In, Frac
9 101333083 316.21048 3 Insert, Valve, HT400, No. 3 Frac, Urethane, Acid/Frac Service (Yellow)
9 100002823 316.21006 3 Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)
10 100002825 316.21008 3 Seat Valve, HT400, No. 3 Frac, Tapered
11 100000968 8.34037 3 O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240
12 100002838 316.21096 3 Retainer, Guide Bushing, HT400, 3.38, 4.0 Inch, Tapered Seat Bore

Table 6.6—4-1/2-inch Fluid-End Discharge Valve Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100007820 316.2202 3 Retainer, Cover, HT-400™, 4.0 in.
2 100002938 316.23091 3 Cover, Discharge, Double Guided Valve, HT-400™, 4.0 and 4.5 in.
3 100002878 316.22052 3 Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400™
4 100002877 316.22051 3 Ring, Spacer, Discharge Valve & Cylinder Head Cover, No.4, HT- 400™
5 100002868 316.22005 6 Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass
6 100002867 316.22004 6 Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac
7 100002936 316.2308 3 Spring, Valve, HT400, No. 4, 4.5 Inch, 25 lb/in
8 100002875 316.22048 3 Valve, HT400, 4.5 inch, Frac
9 101333104 316.22046 3 Insert, Valve, HT400, No. 4 Frac, Urethane, Acid/Frac Service (Yellow)
9 100002876 316.22049 3 Insert, Valve, HT400, No. 4 Frac, Urethane, Standard Service (Brown)
10 100002874 316.22047 3 Seat Valve, HT400, No. 4 Frac, Tapered
11 100000970 8.34041 3 O-ring, 90 Duro, 4 1/2 x 4 1/4 x 1/8, 568-244
12 100002955 316.23953 3 Retainer, Guide Bushing, HT400, No. 4, Tapered Seat Bore

Table 6.7—5.0- and 6.0-inch Fluid-End Discharge Valve Subassembly
Loc SAP Part No. Legacy No. Qty Description
1 100058508 316.2502 3 Retainer, Cover, HT-400™, 5.75 in.
2 100058471 316.24044 3 Cover, Discharge, Double Guided Valve, HT-400™, 5.0 and 6.0 in.
3 100011734 316.25052 3 Gasket, Discharge Valve & Cylinder Head Cover, No. 5, HT-400™
4 100011733 316.25051 3 Ring, Spacer, Cylinder Head Cover, No.5, HT-400™
5 100002870 316.22007 6 Liner, Two Piece Bushing, Valve Guide, HT400, No.5 Frac, Brass
6 100002869 316.22006 6 Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 5 Frac
7 100058597 316.27259 3 Spring, Valve, HT400, No. 5, Conical, Stainless, 50 lb/in
8 100002960 316.24027 3 Valve, HT400, No. 5, 5.0 and 6.0 inch, Frac
9 101349952 316.24026 3 Insert, Valve, HT400, No. 5 Frac, Urethane, Acid/Frac Service (Yellow)
9 100002961 316.24037 3 Insert, Valve, HT400, No. 5 Frac, Urethane, Standard Service (Brown)
10 100002957 316.24024 3 Seat Valve, HT400, No. 5 Frac, Tapered

Table 6.7—5.0- and 6.0-inch Fluid-End Discharge Valve Subassembly

100000974 8.34045

100002962 316.24043

3 O-ring, 90 Duro, 5-in. x 4 3/4-in. x 1/8-in., 568-248 3 Retainer, Guide Bushing, HT400, No. 5, Tapered Seat Bore

6.8—3 3/8-mch Fluid-End Plunger/Cylinder Head Cover Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100008186 316.2102 6 Retainer, Cover, HT-400™, 3.38 in
1 100011711 316.22606 3 Retainer, Protective Cylinder Head Cover, 4.0 in
2 100002836 316.2107 3 Cover, Cylinder Head, HT-400™, 3.38 in
2 100002902 316.22605 3 Cover, Protective Cylinder Head, 4.0 in
3 100002830 316.21052 6 Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in
4 100002829 316.21051 6 Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover, 3 3/8
5 100002843 316.2131 3 Nose, Plunger, HT-400™, 3 3/8 in.
6 100002842 316.2130 3 Seal, Plunger Nose Assembly, HT-400™, 3 3/8 in
7 100009641 316.21026 3 Plunger, 3 3/8 in., Hard Surface, L-Spacer, HT-400™
8 100002827 316.21028 3 Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in
9 100002831 316.21059 3 Adapter, Pushrod, HT-400™, 3 3/8 in, Two Piece Nose

Table 6.9—4-inch Fluid-End Plunger/Cylinder Head Cover Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100008186 316.2102 6 Retainer, Cover, HT-400™, 3.38 in
1 100011711 316.22606 3 Retainer, Protective Cylinder Head Cover, 4.0 in
2 100002836 316.2107 3 Cover, Cylinder Head, HT-400™, 3.38 in
2 100002902 316.22605 3 Cover, Protective Cylinder Head, 4.0 in
3 100002830 316.21052 6 Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in
4 100002829 316.21051 6 Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover, 3 3/8
5 100002885 316.2231 3 Nose, Plunger, HT-400™, 4.0 in.
6 100002884 316.2230 3 Seal, Plunger Nose Assembly, HT-400™, 4.0
7 100002883 316.22294 3 Plunger, 4.0 In., Hard Surface, L-Spacer, HT-400™
8 100002827 316.21028 3 Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in
9 100011706 316.22302 3 Adapter, Pushrod, HT-400™, 4.0 in, Two Piece Nose

Table 6.10—4 1/2-inch Fluid-End Plunger/Cylinder Head Cover Subassembly
Loc SAP Part No. Legacy No. Qty Description
1 100007820 316.2202 6 Retainer, Cover HT-400™, 4.5 in
1 100007823 316.23639 3 Retainer, Protective Cylinder Head Cover, 4.5 in
2 100009530 316.2207 3 Cover, Cylinder Head, HT-400™, 4.5 in, Bar Stock
2 100002952 316.23638 3 Cover, Protective Cylinder Head, 4.5 in
3 100002878 316.22052 6 Gasket, 4 Discharge Valve & Cylinder Head Cover, 4 1/2
4 100002877 316.22051 6 Ring, Spacer, #4 Discharge Valve & Cylinder Head Cover, 4 1/2
5 100002941 316.2331 3 Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in.
6 100002940 316.2330 3 Seal, Plunger Nose Assembly, HT-400™, 4.5
7 100002937 316.23085 3 Plunger, 4.5 In., Hard Surface, L-Spacer, HT-400™
8 100002827 316.21028 3 Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in
9 100011721 316.23089 3 Adapter, Pushrod, HT-400™, 4.5 in, Two Piece Nose

Table 6.11 —5-inch Fluid-End Plunger/Cylinder Head Cover Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100058508 316.2502 6 Retainer, Cover, HT-400™, 5.75 in
1 100058490 316.24615 3 Retainer, Protective Cylinder Head Cover, 5 in
2 100058475 316.2407 3 Cover, Cylinder Head, HT-400™, 5.0 in
2 100011728 316.24614 3 Cover, Protective Cylinder Head, 5.0 in
3 100011734 316.25052 6 Gasket, 5 Discharge Valve & Cylinder Head Cover, 5 in
4 100011733 316.25051 6 Ring, Spacer, #5 Discharge Valve & Cylinder Head Cover, 5 in
5 100002941 316.2331 3 Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in.
6 100002940 316.2330 3 Seal, Plunger Nose Assembly, HT-400™, 4.5
7 100011726 316.24296 3 Plunger, 5.0 In., Hard Surface, L-Spacer, HT-400™
8 100002970 316.25165 3 Tie Rod, Plunger, HT-400™, 6.0 in
9 100011727 316.24336 3 Adapter, Pushrod, HT-400™, 5.0 in, Two Piece Nose

Table 6.12—6-inch Fluid-End Plunger/Cylinder Head Cover Subassembly

Loc SAP Part No. Legacy No. Qty Description
1 100058510 316.2506 6 Retainer, Cover, HT-400™, 6.0 in
1 100058618 316.27614 3 Retainer, Protective Cylinder Head Cover, 6 in
2 100008190 316.2507 3 Cover, Cylinder Head, HT-400™, 6.0 in
2 100058617 316.27613 3 Cover, Protective Cylinder Head, 6.0 in
3 100058512 316.25074 6 Gasket, 6 Discharge Valve & Cylinder Head Cover, 6 in
4 100058511 316.25073 6 Ring, Spacer, #6 Discharge Valve & Cylinder Head Cover, 6 in
5 100002941 316.2331 3 Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in.
6 100002940 316.2330 3 Seal, Plunger Nose Assembly, HT-400™, 4.5
7 100058514 316.25162 3 Plunger, 6.0 In., Hard Surface, L-Spacer, HT-400™
8 100002970 316.25165 3 Tie Rod, Plunger, HT-400™, 6.0 in
9 100058517 316.25172 3 Adapter, Pushrod, HT-400™, 6.0 in, Two Piece Nose
Loc SAP Part No. Qty
4 101377627 3
5 100002011 3
6 101377626 3
7 101377624 3
8 101377623 3
9 101377622 3
10 101377620 3
Loc SAP Part No. Qty
1 100002081 3
2 100002846 3
3 100002845 3

Table 6.14—3-3/8-inch CDI Packing

Description

Seal, Packing Lube, 3.375, WS-Seal, CDI O-Ring, 90 Duro, 4 3/8 x 4 1/8 X 1/8 568-243 Carrier, Seal, 3.375, CDI Adapter, Female, 3.375, PEEK, CDI Packing, 3.375, CDI, WSP1, PTFE Header Ring, 3.375, HNBR, CDI Spacer, 3.375, Fluid End, CDI

Table 6.13—3-3/8-inch Packing Nut

Description

Pin, Groove, ^-in x 1 ^-in, Type 5 Sleeve, Wiper Gland, 3.375 Inch Nut, Packing Adjustment, 3.375 Inch

Packing Nut and Packing Subassembly

Loc SAP Part No. Qty Description
4 101408135 3 Seal, Packing Lube, Z20, 3-3/8 x 3-7/8 x 9/16 Zurcon UCUP, Double Lip

5 100000969 3 O-Ring, 90 Duro, 4 3/8 x 4 1/8 X 1/8 568-243
6 101389194 3 Carrier, Seal, 3.375, HT-400™, 2004
7 100002852 3 Ring, Backup, Packing, HT-400™ 3.38 in, 2004
8 100002854 3 Packing Set, 3 3/8 x 4 3/8 x 0.50 Stock HT, 3 rings, Hard, Acid Service
9 100058346 3 Header Ring, 3 3/8 x 4 3/8 Packing, Polyurethane, HT-400™ FE
10 100002852 3 Adapter, Header Ring, 3 3/8 x 4/3/8, HT-400™, FE

Table 6.16—4.0-inch Packing Nut
Loc SAP Part No. Qty Description
1 100002081 3 Pin, Groove, 1/2-in x 1 %-in, Type 5
2 101328357 3 Sleeve, Wiper Gland, HCLE, 4.0 Inch
3 101328001 3 Nut, Packing Adjustment, HCLE, 4.0 Inch

Table 6.17 — 4.0-inch CDI Packing
Loc SAP Part No. Qty Description
4 101377657 3 Seal, Packing Lube, 4.000, WS-Seal, CDI
5 100002016 3 O-Ring, 90 Duro, 5 x 4 3/4 X 1/8 568-248
6 101377656 3 Carrier, Seal, 4.000, CDI
7 101377652 3 Adapter, Female, 4.000, PEEK, CDI
8 101377641 3 Packing, 4.000, CDI, WSP1, PTFE
9 101377640 3 Header Ring, 4.000, HNBR, CDI
10 101377638 3 Spacer, 4.000, Fluid End, CDI

Loc SAP Part No. Qty Description
4 100058388 3 Seal, Packing Lube, Z20, 4 x 4 1/2 x 9/16 Zurcon UCUP, Double Lip FE
5 100000974 3 O-Ring, 90 Duro, 5 x 4 3/4 X 1/8 568-248
6 101389213 3 Carrier, Seal, 4.0, HT-400™, 2004
7 101389224 3 Ring, Backup, Packing, HT-400™ 4.0 in, 2004
8 100002899 3 Packing Set, 4 x 5 x 0.50 Stock HT, 3 rings, Hard, Acid Service
9 100002897 3 Header Ring, 4 x 5 Packing, Polyurethane, HT-400™ FE
10 100002896 3 Adapter, Header Ring, 4 x 5, HT-400™, FE

Table 6.19—4.5-inch Packing Nut
Loc SAP Part No. Qty Description
1 100002081 3 Pin, Groove, 1/2-in x 1 %-in, Type 5
2 101328357 3 Sleeve, Wiper Gland, HCLE, 4.0 Inch
3 101330209 3 Nut, Packing Adjustment, HCLE, 4.5 Inch

Table 6.20—4.5-inch CDI Packing
Loc SAP Part No. Qty Description
4 101377665 3 Seal, Packing Lube, 4.50, WS-Seal, CDI
5 100002019 3 O-Ring, 90 Duro, 5 1/2 x 5 1/4 x 1/8 568-252
6 101377664 3 Carrier, Seal, 4.50, CDI
7 101377663 3 Adapter, Female, 4.500, PEEK, CDI
8 101377661 3 Packing, 4.50, CDI WSP1, PTFE
9 101377660 3 Header Ring, 4.50, HNBR, CDI
10 101377659 3 Spacer, 4.50 in., Fluid End, CDI

Loc SAP Part No. Qty Description
4 101252286 3 Seal, Packing Lube, Z20, 4 1/2 x 5 x 9/16 Zurcon UCUP, Double Lip FE
5 100000977 3 O-Ring, 90 Duro, 5 1/2 x 5 1/4 X 1/8 568-252
6 101389214 3 Carrier, Seal, 4.5, HT-400™, 2004
7 101389225 3 Ring, Backup, Packing, HT-400™ 4.5 in, 2004
8 100002951 3 Packing Set, 4 1/2x 5 1/2 x 0.50 Stock HT, 3 rings, Hard, Acid Service
9 100002949 3 Header Ring, 4 1/2 x 5 1/2 Packing, Polyurethane, HT-400™ FE
10 100002948 3 Adapter, Header Ring, 4 1/2 x 5 1/2, HT-400™, FE

Table 6.22—5.0-inch Packing Nut
Loc SAP Part No. Qty Description
1 100027239 3 Pin, Groove, 3/8-in x 1 ^-in, Type 5
2 101438001 3 Sleeve, Wiper Gland, HCLE, 5.0 Inch
3 101438000 3 Nut, Packing Adjustment, HCLE, 5.0 Inch

Table 6.23—5.0-inch CDI Packing
Loc SAP Part No. Qty Description
4 101377674 3 Seal, Packing Lube, 5.0, WS-Seal, CDI
5 101377672 3 O-Ring, 90 Duro, 6 x 5 3/4 x 1/8, 568-256
6 100002022 3 Carrier, Seal, 5.0, CDI
7 101377671 3 Adapter, Female, 5.00, PEEK, CDI
8 101377669 3 Packing, 5.0, CDI WSP1, PTFE
9 101377668 3 Header Ring, 5.0, HNBR, CDI
10 101377667 3 Spacer, 5.0 in., Fluid End, CDI

Loc SAP Part No. Qty Description
4 101408161 3 Seal, Packing Lube, Z20, 5 x 5 1/2 x 9/16 Zurcon UCUP, Double Lip FE
5 100000980 3 O-Ring, 90 Duro, 6 x 5 3/4 X 1/8 568-256
6 101389216 3 Carrier, Seal, 5.0, HT-400™, 2004
7 101389226 3 Ring, Backup, Packing, HT-400™ 5.0 in, 2004
8 100002967 3 Packing Set, 5 x 6 x 0.50 Stock HT, 3 rings, Hard, Acid Service
9 100058486 3 Header Ring, 5 x 6 Packing, Polyurethane, HT-400™ FE
10 100002966 3 Adapter, Header Ring, 5 x 6, HT-400™, FE

Table 6.25—6.0-inch Packing Nut
Loc SAP Part No. Qty Description
1 100027239 3 Pin, Groove, 3/8-in x 1 %-in, Type 5
2 101330379 3 Sleeve, Wiper Gland, HCLE, 6.0 Inch
3 101330259 3 Nut, Packing Adjustment, HCLE, 6.0 Inch

Table 6.26—6.0-inch CDI Packing
Loc SAP Part No. Qty Description
4 101377686 3 Seal, Packing Lube, 6.0, WS-Seal, CDI
5 100007763 3 O-Ring, 90 Duro, 7 x 6 3/4 x 1/8, 568-261
6 101377685 3 Carrier, Seal, 6.0, CDI
7 101377684 3 Adapter, Female, 6.00, PEEK, CDI
8 101377683 3 Packing, 6.0, CDI WSP1, PTFE
9 101377682 3 Header Ring, 6.0, HNBR, CDI
10 101377679 3 Spacer, 6.0 in., Fluid End, CDI

Loc SAP Part No. Qty Description
4 101408181 3 Seal, Packing Lube, Z20, 6 x 6 1/2 x 9/16 Zurcon UCUP, Double Lip FE
5 100013726 3 O-Ring, 90 Duro, 7 x 6 3/4 X 1/8 568-261
6 101389217 3 Carrier, Seal, 6.0, HT-400™, 2004
7 101389227 3 Ring, Backup, Packing, HT-400™ 6.0 in, 2004
8 100002997 3 Packing Set, 6 x 7 x 0.50 Stock HT, 3 rings, Hard, Acid Service
9 100058613 3 Header Ring, 6 x 7 Packing, Polyurethane, HT-400™ FE
10 100002996 3 Adapter, Header Ring, 6 x 7, HT-400™, FE

Fluid-End Straight Discharge Flange

Loc SAP Part No. Legacy No. Qty Description
1 100058317 316.21013 1 Flange, Discharge, HT-400™ Pump, 3-3/8 Inch, 20,000 PSI, Straight
2 100002801 315.27117 1 Seal, Discharge Passage, 2.5 OD
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 100002798 315.11183 2 Washer, Flat, Worm Housing, Head, 1 In.
5 100002926 316.23013 2 Stud, HT-400™, Fluid End To Thick Discharge Flange

Table 6.29—4.0-inch Fluid-End Straight Discharge Flange
Loc SAP Part No. Legacy No. Qty Description
1 100002992 316.27482 1 Flange, Discharge, HT-400™ Pump, 4.0 – 6.0 Inch Straight
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4

100002798   315.11183   2   Washer, Flat, Worm Housing, Head, 1 In. Flange Secured by Fluid End Tie Bolts

Table 6.30—4 1/2-, 5.0-, and 6.0-inch Fluid-End Straight Discharge Flange

Loc SAP Part No. Legacy No. Qty Description
1 100002992 316.27482 1 Flange, Discharge, HT-400™ Pump, 4.0 – 6.0 Inch, Straight
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 No Washers Used
5 100002926 316.23013 2 Stud, HT-400™, Fluid End To Thick Discharge Flange

Fluid-End Curved Discharge Flange

Loc SAP Part No. Legacy No. Qty Description
1a 100009881 316.21676 1 Flange, Discharge, HT-400™，3-3/8 Inch, 20,000 PSI, Curved, RH
1b 100009882 316.21677 1 Flange, Discharge, HT-400TM, 3-3/8 Inch, 20,000 PSI, Curved, LH
2 100002801 315.27117 1 Seal, Discharge Passage, 2.5 OD
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 100002798 315.11183 2 Washer, Flat, Worm Housing, Head, 1 In.
5 100002926 316.23013 2 Stud, HT-400™, Fluid End To Thick Discharge Flange
Loc SAP Part No. Legacy No. Qty Description
1a 100002930 316.23019 1 Flange, Discharge, HT-400™，4.0 – 6.0 Inch, Right-Hand Curved
1b 100002929 316.23017 1 Flange, Discharge, HT-400™，4.0 – 6.0 Inch, Left-Hand Curved
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 100002798 315.11183 2 Washer, Flat, Worm Housing, Head, 1 In.
5 Flange Secured by Fluid End Tie Bolts

Table 6.33—4 1/2-, 5.0-, and 6.0-inch Fluid-End Curved Discharge Flange

Loc SAP Part No. Legacy No. Qty Description
1a 100002930 316.23019 1 Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Right-Hand
1b 100002929 316.23017 1 Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Left-Hand
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 No Washers Used
5 100002926 316.23013 2 Stud, HT-400™, Fluid End To Thick Discharge Flange

Blank Discharge Flange Subassembly

Table 6.34—3 3/8-inch Fluid-End Blank Discharge Flange (Thin)

Loc SAP Part No. Legacy No. Qty
1 100002858 316.21673 1
2 100002801 315.27117 1
3 100002811 316.11621 2
4 100002798 315.11183 2
5 100009362 316.23012 2
Table 6.35- —3 3/8-inch Fluid-
Loc SAP Part No. Legacy No. Qty
1 101325320 1
2 100002801 315.27117 1
3 100002811 316.11621 2
4 100002798 315.11183 2
5 100002926 316.23013 2

Description

Flange, Discharge, HT-400™，3.38 In., Blank, Thin (Uses Short Top Tie Bolt: 100002893)

Seal, Discharge Passage, 2.5 OD Nut, 1-14 NF, Internal Wrenching, 1.03 Total Length Washer, Flat, Worm Housing, Head, 1 In.

Stud, HT-400™, Fluid End To Thin Discharge Flange

Description

Flange, Discharge, HT-400TM, 3.38 In., Blank, Thick (Uses Standard Top Tie Bolt)

Seal, Discharge Passage, 2.5 OD Nut, 1-14 NF, Internal Wrenching, 1.03 TL Washer, Flat, Worm Housing, Head, 1 In.

Stud, HT-400™, Fluid End To Thick Discharge Flange

Loc SAP Part No. Legacy No. Qty Description
1 100007821 316.22980 1 Flange, Discharge, HT-400™，4.0, 4.5, 5.0, 6.0 Inch Blank, Thick
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4

100002798   315.11183   2   Washer, Flat, Worm Housing, Head, 1 In. Flange Secured by Fluid End Tie Bolts

Table 6.37—4 1/2-, 5.0-, and 6.0-inch Fluid-End Blank Discharge Flange
Loc SAP Part No. Legacy No. Qty Description
1 100007821 316.22980 1 Flange, Discharge, HT-400™, 4.0, 4.5, 5.0, 6.0 Inch , Blank, Thick
2 100002975 316.2547 1 Seal, Discharge Passage, HT-400™, 3.375 O.D.
3 100002811 316.11621 2 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
4 No Washers Used
5 100002926 316.23013 2 Stud, HT-400™, Fluid End To Thick Discharge Flange

Fluid-End Section Subassembly

3-3/8-, 4 1/2-, 5.0-, and 6.0-inch Fluid Ends

4.0-inch Fluid Ends (Three Top Tie-Bolts)

Loc SAP Part No. Legacy No. Qty Description
1 100002850 316.2145 2 Spacer, Inner, Discharge Passage Seal, HT-400™, 3.375 in FE
2 100002801 315.27117 6 Seal, Discharge Passage, HT-400™, 2.5 in. O.D.
3 100002993 316.27488 1 Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC
5 100002976 316.25501 2 Nut, Top Tie Bolt, HT-400™, TC
6 100002894 316.22493 2 Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt,
7 100002811 316.11621 4 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
8 100002798 315.11183 4 Washer, Flat, Worm Housing, Head, 1 In.
9 100007819 316.21981 3 Sleeve, Packing, HT400, 3.38 In.
10 100007621 8.34038 3 O-Ring, 90 Duro, 4 1/8 X 3 7/8 X 1/8, 568-241
11a 100002866 316.21951 3 Fluid End Section, HT-400™ Pump, 3.38 Inch, Not Sleeved
11b 101455172 3 Fluid End Section, HT-400™ Pump, 3.38 Inch, With Packing Sleeve
12 100058621 316.27927 1 Tag, Part Number, Fluid End, HT-400™
13 100001860 70.32760 2 Nut, Elastic, Stop, 3/4-in., 16NF
14 100002925 316.23011 1 Bolt, Bottom, Tie, HT400, Type Certified

Table 6.39—4.0-inch Fluid End

Loc SAP Part No. Legacy No. Qty Description
1 100002974 316.2545 2 Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in.
2 100002975 316.2547 6 Seal, Discharge Passage, HT-400™, 3.375 in. O.D.
3 100002993 316.27488 1 Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™ TC
4 100002994 316.27489 2 Bolt, Tie, Fluid End, HT-400™, 1 in. Dia, Three Top Tie Bolt FE, TC
5 100002976 316.25501 2 Nut, Top Tie Bolt, HT-400™, TC
6 100002894 316.22493 2 Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt,
7 100002811 316.11621 4 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
8 100002798 315.11183 4 Washer, Flat, Worm Housing, Head, 1 In.
9 100002914 316.22981 3 Sleeve, Packing, HT400, 4.0 In.
10 100000972 8.34043 3 O-Ring, 90 Duro, 4 3/4 X 4 1/2 X 1/8, 568-246
11a 100002915 316.22982 3 Fluid End Section, HT-400™ Pump, 4.00 Inch, Not Sleeved
11b 101455173 3 Fluid End Section, HT-400™ Pump, 4.00 Inch, With Packing Sleeve
12 100058621 316.27927 1 Tag, Part Number, Fluid End, HT-400™

Loc SAP Part No. Legacy No. Qty Description
1 100002974 316.2545 2 Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in.
2 100002975 316.2547 6 Seal, Discharge Passage, HT-400™, 3.375 in. O.D.
3 100002993 316.27488 1 Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™ TC
5 100002976 316.25501 2 Nut, Top Tie Bolt, HT-400™, TC
6 100002894 316.22493 2 Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt,
7 100002811 316.11621 4 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
8 Washer Not Used In This Application
9 100002956 316.23981 3 Sleeve, Packing, HT400, 4.5 In.
10 100000975 8.34047 3 O-Ring, 90 Duro, 5 1/4 X 5 X 1/8, 568-250
11a 100002954 316.23951 3 Fluid End Section, HT-400™ Pump, 4.5 Inch, Not Sleeved
11b 101455174 3 Fluid End Section, HT-400™ Pump, 4.5 Inch, With Packing Sleeve
12 100058621 316.27927 1 Tag, Part Number, Fluid End, HT-400™
13 100001860 70.32760 2 Nut, Elastic, Stop, 3/4-in., 16NF
14 100002925 316.23011 1 Bolt, Bottom, Tie, HT400, Type Certified

Table 6.41 —5.0-inch Fluid End

Loc SAP Part No. Legacy No. Qty Description
1 100002974 316.2545 2 Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in.
2 100002975 316.2547 6 Seal, Discharge Passage, HT-400™, 3.375 in. O.D.
3 100002993 316.27488 1 Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT- 400™, TC
5 100002976 316.25501 2 Nut, Top Tie Bolt, HT-400™, TC
6 100002894 316.22493 2 Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt,
7 100002811 316.11621 4 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
8 Washer Not Used In This Application
9 100002969 316.24981 3 Sleeve, Packing, HT400, 5.0 In.
10 100000979 8.34051 3 O-Ring, 90 Duro, 5 3/4 X 5 1/2 X 1/8, 568-254
11a 100058502 316.24951 3 Fluid End Section, HT-400™ Pump, 5.0 Inch, Not Sleeved
11b 101455175 3 Fluid End Section, HT-400™ Pump, 5.0 Inch, With Packing Sleeve

Table 6.41 —5.0-inch Fluid End

12 100058621 316.27927 1 Tag, Part Number, Fluid End, HT-400™
13 100001860 70.32760 2 Nut, Elastic, Stop, 3/4-in., 16NF
14 100002925 316.23011 1 Bolt, Bottom, Tie, HT400, Type Certified
Table 6.42—6.0-inch Fluid End
Loc SAP Part No. Legacy No. Qty Description
1 100002974 316.2545 2 Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in.
2 100002975 316.2547 6 Seal, Discharge Passage, HT-400™, 3.375 in. O.D.
3 100002993 316.27488 1 Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT- 400™, TC
5 100002976 316.25501 2 Nut, Top Tie Bolt, HT-400™, TC
6 100002894 316.22493 2 Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt,
7 100002811 316.11621 4 Nut, 1-14 NF, Internal Wrenching, 1.03 TL
8 Washer Not Used In This Application
9 100002998 316.27981 3 Sleeve, Packing, HT400, 6.0 In.
10 100000983 8.34057 3 O-Ring, 90 Duro, 6 3/4 X 6 1/2 X 1/8, 568-260
11a 100058622 316.27951 3 Fluid End Section, HT-400™ Pump, 6.0 Inch, Not Sleeved
11b 101455176 3 Fluid End Section, HT-400™ Pump, 6.0 Inch, With Packing Sleeve
12 100058621 316.27927 1 Tag, Part Number, Fluid End, HT-400™
13 100001860 70.32760 2 Nut, Elastic, Stop, 3/4-in., 16NF
14 100002925 316.23011 1 Bolt, Bottom, Tie, HT400, Type Certified

Plunger Lube Pump Assembly

Table 6.43—Plunger Lube Pump Subassembly

Loc SAP Part No. Legacy No. Qty
1 100029874 70.58806 8
2 13431 70.43839 8
3 100003003 317.54010 1
4 100058711 317.51020 1
5 100011749 317.51065 1
6 100028805 70.44781 1
7 100011751 317.51067 1
8 100011750 317.51066 1
9 100011748 317.51064 1

Description

Washer, Flat, 3/8-in. WI, Pl

Screw, Hex Socket, 3/8-in. 16NC x 1 1/4-in., Unbrako/ Loc-Wel

Pump, Gear, Recirculating Plunger Lubrication, HT-400™ Pump

Adapter, Pump To Thrust Plate, Plunger Lube, HQ

Adapter, HQ, Lube Pump, Plunger Lube

1/4-in. x 1/4-in. 20NC Set Screw

Seal, Lip, 1.000 Id X 2.000 Od X 0.250 Width

Bearing, Ball, Radial, 1.0 Id X 2.0 Od X 0.375 Thick,

Open

Adapter, HQ, Worm Shaft, Plunger Lube

Recirculating Plunger Lube Pump Plumbing

To inlet

manifold

From outlet

Return to tank

The configuration sho^wn is fo^ a right-handp-ump case. For a left- hand pump case, the recirculatingp^ump is rotated 180° and the plumbing is a mirror image.

Table 6.44—Recirculating Plunger Lube Pump Plumbing

Loc SAP Part No. Qty Description
1 100025600 1 Adapter, Hose, Straight, 1 1/16-12 JIC Male x 1/2-14 MPT, Stl
2 100035164 1 Adapter, Hose, Cross, 1/2-14 MPT x 1/2 -14 FPTx 12 -14 FPT, Aeroquip
3 100016860 2 Nipple, Standard, 1/2 X AT, Blackwall, A120
4 101139835 1 Pipe Plug – 1/2 NPT, Sq Head, Steel
5 100033152 1 Adapter, Hose, Cross, Tee, 1/2-14 FPT
6 100001210 1 Bushing, Hexagon, 1/2 x 1/4, Steel

Table 6.44—Recirculating Plunger Lube Pump Plumbing (Continued)

Loc SAP Part No. Qty Description
7 100025044 1 Gauge, Pressure, 0-60 psi, 2 1/2 in., 1/4 NPT
8 100025646 1 Adapter, Hose, Elbow, 9/16-18 JIC Male x 1/2-14 MPT, Steel
9 1 00033606 2 Fitting, Hose, Straight, 3/8 NOM Hose x 9/16 JIC Swivel Female, Brass
10 100016518 1 Bushing, Hexagon, 3/4 x 1/2, Steel
11 100015300 1 Valve, Relief, Brown and Sharp, 3/4, Preset at 45#
12 100031214 1 Adapter, Hose, Straight, 1 1/16-12 JIC Female x 9/16-18 JIC Male
13 100031598 1 Adptr, Hose, Tee, 1 1/16-12 JIC M x 3/4-14 MPT x 1 1/16-12 JIC M, Stl
14 100035892 2 Fitting, Hose, Straight, 1 1/16-12 JIC Swivel Female x 3/4 NOM Hose, Brs

Recirculating Plunger Lube Fluid-End Manifold Plumbing

From ube

pump

Return to tank

Component orientation and hose length scale are altered for improved viewing

Table 6.45—Recirculating Plunger Lube Fluid-End Manifold Plumbing

Loc SAP Part No. Qty. Description
1 100025596 1 Adapter, Hose, Straight, 9/16-18 JIC Male x 1/4-18 NPT Male, Steel
2 100000596 1 Valve, Ball, 1/4, 600 PSI, FPT, Bronze Body, 316 Ball & Stem, Tefl Seats & Seals
3 100033761 1 Adapter, Hose, 90 Degree 1/4-18 MPT x 1/4-18 MPT, Aero
4 101376366 2 Assembly, Manifold, Plunger, Lubrication, FE, Triplex, WSP

Table 6.45—Recirculating Plunger Lube Fluid-End Manifold Plumbing (Continued)

Loc SAP Part No. Qty. Description
5 100032911 2 Tag, Identification, Hydraulic Tubing, Stnls Stl, 0.31 Wide x 14.3
6 100025591 6 Adapter, Hose, Straight, 7/16-20 JIC Male x 1/8-27 MPT, Steel
7 101374860 3 Line, Upper, Oil, Plunger Lubricator, WSP
9 100002681 1 Valve, Safety, 1/4, Brass, 150 psi Pressure Relief Setting
10 100027497 1 Plug, Pipe, 1/4 18 NPTF, Steel Countersunk Hex, Headless
12 101374914 3 Line, Lower, Oil, Plunger Lubricator, WSP
13 100000592 3 Valve, Check, 1/8, Female Inlet, Male Outlet, With 70 Duro O-Ring
14 100025604 6 Adapter, Hose, Elbow, 7/16-20 JIC Male x 1/8-27 MPT, Steel
15 100028293 2 Screw, Hex Socket, 3/4-10 NC x 1 1/4
16 100029925 2 Washer, Lock, 3/4, Steel, PL
17 101391751 2 Bracket, Plunger Lubrication Manifold, WSP
18 100015025 1 Adapter, Hose, Elbow, 9/16-18 JIC Male x 1/4-18 MPT, Steel

Quintuplex Discharge Flanges, Seals, and Seal Plates

Find

No.

Description Qty.    4.0 in. 4.5 in. 5.0 in. 6.0 in. Notes

Fluid-End Section
1 Fluid-end section 1 101414414 101414412 101441714 101414413 厂
Fluid-end section 1 N/A 101476487 N/A N/A 厂
2 Fluid-end section groove pin 1 100002081 100002081 100002081 100002081 厂
Discharge
3 Retainer discharge cover 1 101327491 101229388 101229388 101229388 厂
4 Discharge cover 1 101327844 101228808 101450115 101450115 厂
5 Discharge cover groove pin 1 101303165 101303165 101448347 101448347 厂
6 Discharge cover seal 1 101424202 101425718 101427748 101427748 「, △
7 Insert 2 100002867 100002867 100002869 100002869 A, O
8 Insert liner 2 100002868 100002868 100002870 100002870 △, 〇
9 Discharge cage 1 101327879 101229192 101430559 101430559 r, △
10 Spring 1 100002837 100002936 100058597 100058597 △
11 Valve 1 100002824 101354936 100002960 100002960 △
12 Valve insert 1 101333083 101333104 101349952 101349952 △
13 Valve seat cover seals 2 101424205 101425640 101426649 101426649 r, △
13f Valve seat cover seals 2 N/A 101473483 N/A N/A r, △
13t Valve seat cover seals 2 101439486 101481071 101439913 101439913 r, △
14 Integrated valve seat 1 101402944 101416765 101416766 101416766 r, △
14t Integrated valve seat 1 N/A 101475252 N/A N/A r, △
14t Integrated valve seat 1 101440202 101483244 101441257 101441257 r, △
Access

Access Cover

15 Plug 1 101415893 101415893 101415893 101415893 厂
16 Cover seal 1 101424201 101424201 101424201 101424201 r, △
Suction
17 Stop retainer/guide spring 1 101327609 100003045 100003045 100003045 O
18 Insert 2 100002867 100002869 100002869 100002869 O
19 Insert liner 2 100002868 100002870 100002870 100002870 O
20 Spring 1 100002936 100002936 100002936 100002936 △, O
21 Valve 1 101354936 100002960 100002960 100002960 △, O
22 Valve insert 1 101333104 101349952 101349952 101349952 △, O
23 Valve seat 1 100002874 100002957 100002957 100002957 △, O
24 O-ring 1 100000970 100000974 100000974 100000974 △, O
25 Guide bushing retainer 1 101328144 101355505 101355505 101355505 O

Table 8.1 —HCLE Fluid-End, Single-Section Assembly (Continued)

Find

No.

Description Qty.    4.0 in. 4.5 in. 5.0 in. 6.0 in. Notes

Plunger

Plunger Packing

26 Spacer 1 101377638 101377659 101377667 101377679 A, ©
27 Header 1 101377640 101377660 101377668 101377682 A, ©
28 Packing 1 101377641 101377661 101377669 101377683 A, ©
29 Adapter 1 101377652 101377663 101377671 101377684 A, ©
30 O-ring 1 100002016 100002019 101377672 100007763 A, ©
31 Carrier 1 101377656 101377664 100002022 101377685 A, ©
32 Seal 1 101377657 101377665 101377674 101377686 A, ©
Plunger Adjustment
33 Packing nut adjustment 1 101328001 101330209 101438000 101330259 ©
34 Wiper gland 1 101328357 101328357 101438001 101330379 ©
Plunger
35 Nose 1 100002885 100002941 100002941 100002941 ©
36 Seal assembly 1 100002884 100002940 100002940 100002940 A, ©
37 Plunger 1 100002883 100002937 100011726 100058514 A, ©
38 Tie rod plunger 1 100002827 100002827 100002970 100002970 ©
39 Plunger adapter 1 100011706 100011721 100011727 100058517 ©

Notes:

f – Parts used specifically for 4.5-in. HCLE fluid ends with reversible discharge seats. t – Parts used specifically for HCLE fluid ends where discharge valve seals are installed into the fluid end. r – Parts unique to the HCLE fluid end A – Consumable parts

Find No. Description Qty. 4.0 in. Qty. 4.5 in. Qty. 5.0 in. Qty. 6.0 in.
Bolting & Tie-Bolts
1 Nut 8 100002976 8 100002976 8 100002976 8 100002976
2 Washer 8 100002894 8 100002894 8 100002894 8 100002894
3 Tie-bolt 4 100002993 4 100002993 4 100002993 4 100002993
Fluid-Enc Tag
4 Tag 1 101441221 1 101441221 1 101441221 1 101441221
Left-Hand Discharge
5 Straight 101427491 101427491 101427491 101427491
Blank 101419211 101419211 101419211 101419211
Straight w/ riser 101419210 101419210 101419210 101419210
Left-hand, right- angle chunk flange 101419209 101419209 101419209 101419209
Right-Hand Discharge
6 Straight 101427491 101427491 101427491 101427491
Blank 101419211 101419211 101419211 101419211
Straight w/ riser 101419210 101419210 101419210 101419210
Right-hand, right- angle chunk flange 101419208 101419208 101419208 101419208
Seals & Sea Plates
7 Discharge Seal 6 101412377 8 101412378 8 101412378 8 101412378
7a Flange seal 4-in. only 2 101412378
8 Seal Plates 4 101413044 4 101413045 4 101413045 4 101413045
Pac dng Lube
Installation plunger lube kit Triplex recirculation manifold lube system 101363113 101363113 101363113 101363113
Find Numbers Description Qty. 4.0 inch Qty. 4.5 inch Qty. 5.0 inch Qty. 6.0 inch
Bolting & Tie-Bolts
1 Nut 8 100002976 8 100002976 8 100002976 8 100002976
2 Washer 8 100002894 8 100002894 8 100002894 8 100002894
3 Tie-bolt 4 100002993 4 100002993 4 100002993 4 100002993
Fluid End Tag
4 Tag 1 101303439 1 101303439 1 101303439 1 101303439
Left Hand Discharge
5 Straight 101427491 101427491 101427491 101427491
Blank 101419211 101419211 101419211 101419211
Straight w/ riser 101419210 101419210 101419210 101419210
Left-hand, right-angle chunk flange 101419209 101419209 101419209 101419209
Right Hand Discharge
6 Straight 101427491 101427491 101427491 101427491
Blank 101419211 101419211 101419211 101419211
Straight w/ riser 101419210 101419210 101419210 101419210
Right-hand, right-angle chunk flange 101419208 101419208 101419208 101419208
Seals & Seal Plates
7 Discharge seal 10 101412377 14 101412378 14 101412378 14 101412378
7a Flange seal 4-in. only 4 101412378
8 Seal plates 7 101413044 7 101413045 7 101413045 7 101413045
Center Flange
9 Spacer 101418816 101418816 101418816 101418816
Spacer w/ pressure port 101420748 101420748 101420748 101420748
Packing Lube
Installation plunger lube kit Quinuplex recirculation manifold lube system 101366706 101366706 101366706 101366706