OIL COUNTRY 45000/55000/56000 OPEN HEAD TUBING TONG

OIL COUNTRY 45000/55000/56000 OPEN HEAD TUBING TONG

MODEL MAX SIZE(IN) MAX TORQUE(FT-LB) WEIGHT(LBS) DIMENSION

(IN)

TORQUE ARM(IN)  MAX SPEED(RPM)

45000 4.75 6670 620 314326 23 97
55000 4.75 8740 620 314326 23 102
56000 4.75 11750 620 314326 23 77

OPEN HEAD TUBING TONG PARTS LIST

item PN# Name  
1 45016 Thrust washer  
2 45026 IDLER GEAR  
3 45028 Thrust washer  
4 45029 Thrust washer  
5 45030 Guide roller shaft  
6 45031 Guide roller shaft  
7 45033 Thrust washer  
8 45034 Thrust washer  
9 45040 Guide roller  
10 45042 103 tooth rotor  
11 45048 Pinion shaft  
12 45050 29tooth high speed pinion  
13 45051 14tooth low speed pinion  
14 45052 Retaining ring  
15 45057 35tooth base  
16 45058 20tooth hub  
17 45134 Inner gear  
18 45140 Planet gear  
19 45277 Large roller  
20 45278 Small roller  
21 45279 Roller bushing  
22 45280 Roller pin  
23 45287 Inner ring  
24 55026 Idler gear  
25 55050 20tooth high speed pinion  
26 55051 13tooth low speed  
27 55056 35tooth base right hand  
28 55057 35tooth base, left hand  
29 55058 11tooth hub  
30 56287    
31 60106 Lifting lever for CANVINS spider  
32 65106 Lifting lever for CANVINS spider  
33 451135-048 Motor shaft  
34 45291A 2 3/8”jaw  
35 45291B 2 7/8”jaw  
36 45291C 3 1/2” jaw  
37 45291D 4 1/2”jaw  
38 45291E 4” jaw  
39 45291K 3 3/4”jaw  
40 45291T 4 1/8’jaw  
41 45292A 2 3/8”jaw  
42 45292B 2 7/8”bushing  
43 45292C 3 1/2”bushing  
44 45292D 4 1/2”bushing  
45 45292E 4”bushing  
46 45292K 3 3/4”bushing  
47 45292T 4 1/2”bushing

SE58 Closed head Tubing Tong is with variable torque, hydraulic lift, Pressure oil bath lubrication, hardened internal gears, roller chain final drive and two-speed operation. Because they are closed head, the power tong stay on the pipe all the way up. You save time because you don’t have to remove and replace the tongs on the pipe after each joint is pulled. Every joint is gripped with a uniform, predetermined torque between 0.41～8.13kN.m (300～6000 ft. lbs), which is controlled by setting the pressure relief valve. It is interchangeable with foster tubing tong. We are able to provide same Jaw and bushing parts.

Technical Parameter

Application Rang:   60～89mm (23/8″ ～ 5″） tubing
Maximum passing diameter:  127mm (5″)
Torque:  0.41～8.13kN.m (300～6000 ft. lbs)
High Gear Rated Torque:  0.41～1.76kN.m (300～1300 ft. lbs)
Low Gear Rated Torque:  8.13kN.m (6000 ft. lbs)
High Gear Rated Speed:  126r/min   Low Gear Rated Speed:  27r/min
Total Length：1295mm (51″)      Thickness of Master Tong: 242mm (91/2″)

High of Master Tong and Backup Tong:  425mm (163/4″)

Maximum dimension of glide elevator:  762mm (30″)
Versa dint of the knot tail rope:  930kg (2056lbs)
Distance of between Tubing center and the knot tail rope:  762mm (30″)
Weight： 456kg (1000lbs)
Rated System Pressure:  13MPa (1880psi)
Maximum Oil Supply:  126L/min (33.5gpm)

SPARE PARTS FOR FOSTER 58-93R CLOSED HEAD HYDRAULIC TUBING TONG

93-26 three row chain
58-47 oil seal
wear bands
93-7 roller bearing
58-14  clutch shaft
819-1 anchor pin
819-5 split ring
819-13 adjust collar
819-9 pressure plate
58-20 ring gear and pinion
93-295 side plate
919-11 outer disc
819-10 inner disc
147-1 ring gear
50-48-1 inserts
77-90 hydraulic motor
58-240 hydraulic valve
93-3-3 transmission case or tong case
867-23 lever for valve
93-4 final drive gear
93-285drag ring sleeve
50-12low clutch gear
50-9high clutch gear