BJ Style Tubing Tongs - DrillingBase.comDrillingBase.com

BJ Style Tubing Tongs           
BJ Style BTS Back up Assembly 2-3/8″ to 3.668″

Item # Part Number Description Approx. Weight (lbs) Qty Required
161 30420-112 MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly less Outer-Inner sleeve assembly. 30.50 lbs
162 30430-110 MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly with Outer-Inner sleeve assembly. 53.42 lbs
163 943667-18 Cotter Pin 0.01 lbs
164 5206 Latch Spring 0.02 lbs
165 1573832 Die with Slot 0.34 lbs
166 6267 Short Jaw 3.20 lbs
167 – Die Retainer Screw 0.01 lbs
168 939142-8 3/4″-10 Stover Nut 0.03 lbs
169 30421-1 Long Jaw Assembly 7.60 lbs
170 30572-1 Latch Arm 3.00 lbs
171 30573 Long Jaw Spring (Y) 0.12 lbs
172 30574 Short Jaw Spring (X) 0.13 lbs
173 30575 Long Hinge Pin, 3/4 0.60 lbs
174 – MS Backup Hanger Leveling Bolt, 5/8″ x 7″ 0.40 lbs
175 28622-5 Outer-Inner sleeve assembly 22.40 lbs
176 28622 Outer Sleeve 14.60 lbs
177 28623 Inner Sleeve 7.60 lbs
178 28624 Lever 8.00 lbs
179 945031-64 Suspension Spring 0.13 lbs
BJ Style BTS Backup Assembly 3-1/2″ to 4-1/2″

Item # Part Number Description Approx. Weight (lbs)
180 – MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly less Outer-Inner sleeve assembly. 30.50 lbs
181 – MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly with Outer-Inner sleeve assembly. 48.18 lbs
182 943667-18 Cotter Pin 0.01 lbs
183 5206 Latch Spring 0.02 lbs
184 1573832 Die with Slot 0.34 lbs
185 6267 Short Jaw 3.20 lbs
186 – Die Retainer Screw 0.01 lbs
187 30359-1 Hex Head Bolt, 3/4″ x 3″ 0.40 lbs
188 939142-8 3/4″-10 Stover Nut 0.03 lbs
189 30421-1 Long Jaw Assembly 7.60 lbs
190 30424-6 Lug Jaw Assembly, 3-1/2″ to 4-1/2″ 2.99 lbs
191 13494 Short Hinge Pin, 3/4 0.40 lbs
192 30572-1 Latch Arm 3.00 lbs
193 30573 Long Jaw Spring (Y) 0.12 lbs
194 30574 Short Jaw Spring (X) 0.13 lbs
195 30575 Long Hinge Pin, 3/4 0.60 lbs
196 – MS Backup Hanger Leveling Bolt, 5/8″ x 7″ 0.40 lbs
197 28622-5 Outer-Inner sleeve assembly 22.40 lbs
198 28622 Outer Sleeve 14.60 lbs
199 28623 Inner Sleeve 7.60 lbs
200 28624 Lever 8.00 lbs
201 945031-64 Suspension Spring 0.13 lbs

BJ Style BTS Tubing Tong

Item # Part Number Description Approx. Weight (lbs)
1 30072 Hydraulic Powered Tubing Tong 30072-X 442.00 lbs
2 30072-12 Hydraulic Powered Tubing Tong 30072-XHT 444.00 lbs
3 – Frame Weldment, model BTSX only 140.00 lbs
4 – Case Shoulder Bolt, 3/4″ X 7-1/2″ 1.00 lbs
5 939352-6 3/4″ Lockwasher 0.02 lbs
6 939142-8 Stover Nut, 3/4″-10 0.05 lbs
7 34898 Frame Cover 82.00 lbs
8 – Frame Cover, model BTSX only 82.00 lbs
9 35129 Brake Band Cover, models RSX & BTSX only 9.63 lbs
10 35129-1 Brake Band Cover, model CTS only 9.63 lbs
11 939084-3 Capscrew, Brake Band Cover 0.01 lbs
12 939349-3 Lock Washer, Brake Band Cover Capscrew 0.01 lbs
13 – Dowel Pin, 1/2″ x 3/4″ 0.01 lbs
14 939067-55 Frame Cover Bolt, 5/8″ x 2″ 0.02 lbs
15 939207-6 Frame Cover Nut, 5/8 0.01 lbs
16 939644-11 Frame Cover Lock Washer, 5/8 0.01 lbs
17 943631-70 Frame Cover Dowel Pin, 3/4″ x 2″ 0.20 lbs
18 30837 Guard Assembly, Top Half (PN. 72-5, 72-11, 72-12) 6.20 lbs
19 30871 Guard, Top Half 5.40 lbs
20 30872 Guard, Bottom Half 3.00 lbs
21 15495-1 Top Guard Nut 0.60 lbs
22 15495-2 Bottom Guard Nut 0.40 lbs
23 939067-44 Guard Capscrew, 1/2″ x 1-3/4 0.01 lbs
24 941439-5 Flexloc Nut 0.02 lbs
25 16448 Guard Spring 0.13 lbs
26 30874 Guard Spring Housing 0.40 lbs
27 16481 Guard Spring Housing Pin, 3/8″ x 2-1/4 0.03 lbs
28 939067-53 Guard Spring Bolt, 3/8″ x 2″ 0.02 lbs
29 16355 Hanger Pin, 5/8″ x 3-1/8″ 0.20 lbs
30 947128-140 Spiral Pin, (roll pin) 0.01 lbs
31 16683 Suspension Spring Housing 9.50 lbs
32 16378 Suspension Spring Shank 2.80 lbs
33 939484-8 Suspension Spring Shank Nut 0.08 lbs
34 939667-28 Cotter Pin 0.01 lbs
35 16446 Suspension Spring, Outer 8.68 lbs
36 27955 Suspension Spring, Inner 1.20 lbs
37 16682 Suspension Spring Washer 0.20 lbs
38 16379-1 Suspension Spring Housing Upper Cap with Eye Bolt and Nut 5.40 lbs
39 16380 Suspension Spring Housing Lower Cap 1.80 lbs
40 15495 Roller Shaft Alemite Nut 0.25 lbs
41 939537-61 Roller Shaft Elastic Stop Nut, 3/4″ 0.20 lbs
42 939644-13 Roller Shaft Washer, 7/8″ 0.10 lbs
43 16480 Idler Sprocket Adjustment Plate 0.60 lbs
44 939067-3 Idler Sprocket Adjustment Plate Capscrew, 3/8″ x 3/4″ 0.02 lbs
45 30835 Front Idler Roller Assembly (PN. 72-35 thru 72-39) 6.05 lbs
46 15494-5 Front Idler Roller Shaft Assembly 1.45 lbs
47 30870 Idler Roller (Front) 1.80 lbs
48 15491 Idler Roller (Back) 2.40 lbs
49 979103-4 Idler Roller Bearing 1.40 lbs
50 941157-281 Idler Roller Bearing Retaining Ring 0.10 lbs
51 942685-118 Idler Roller Assembly Retaining Ring Set 0.01 lbs
52 30361 Back Idler Roller Assembly (PN. 72-41 and 72-36A thru 72-39) 5.05 lbs
53 30360-2 Back Idler Roller Shaft Assembly 1.50 lbs
54 940895-606 Key 0.01 lbs
55 15493-1 Idler Sprocket Assembly (PN. 72-43 thru 72-46) 6.53 lbs
56 15493 Idler Sprocket 5.13 lbs
57 942384-36 Outer Idler Sprocket Bearing 0.30 lbs
58 942394-42 Inner Idler Sprocket Bearing 0.20 lbs
59 15498 Idler Sprocket Bearing Retaining Washer 0.30 lbs
60 941157-231 Idler Sprocket Bearing Retaining Ring 0.10 lbs
61 15492-2 Idler Sprocket Roller Shaft Assembly (PN. 72-46A thru 72-50) 9.60 lbs
62 15496-5 Idler Sprocket Shaft Assembly 2.30 lbs
63 15492 Idler Sprocket Roller 4.75 lbs
64 979103-4 Idler Sprocket Roller Bearing 1.40 lbs
65 941157-281 Idler Sprocket Roller Bearing Retaining Ring 0.10 lbs
66 942685-114 Idler Sprocket Roller Assembly Retaining Ring 0.10 lbs
67 15500 Idler Sprocket Spacer 0.50 lbs
68 15533 Gear Shift Handle 1.50 lbs
69 15516 Gear Shift Handle Lock Pin 0.06 lbs
70 16977 Gear Shift Handle Lock Pin Spring 0.04 lbs
71 940323-4 Gear Shift Handle Grease Fitting 0.01 lbs
72 15534 Gear Shift Shaft 2.08 lbs
73 939484-5 Gear Shift Shaft Stover Nut, 5/8″ 0.01 lbs
74 23056 Gear Shift Shaft Bushing 0.20 lbs
75 942271-11 Gear Shift Shaft “0” Ring 0.01 lbs
76 939995-812 Gear Shift Shaft Key 0.20 lbs
77 15501 Gear Shift Actuator Yoke 1.50 lbs
78 15502 Gear Shift Finger 0.35 lbs
79 15512 High Speed Driven Gear 4.00 lbs
80 15511-1 Low Speed Driven Gear Assembly (PN. 72-64 and 72-65) 9.35 lbs
81 15511 Low Speed Driven Gear 9.00 lbs
82 15537 Low Speed Driven Gear Bushing 0.25 lbs
83 15507 Low Speed Driven Gear Thrust Washer 0.50 lbs
84 979054-304 Sliding Gear Shaft Lower Bearing 0.40 lbs
85 979102-5304 Drive Shaft Lower Bearing 0.40 lbs
86 15505 Frame (Bottom) Gear Box Bearing Plate 0.40 lbs
87 16979 Frame (Bottom) Gear Box Bearing Plate Gasket 0.06 lbs
88 941271-25 Bearing Plate Capscrew, 1/4″ x 1/2″ 0.02 lbs
89 940251-2 Gear Case Drain Plug, 1/4″ 0.08 lbs
90 947915-11 Roller Chain Assembly with Connecting Link and Offset Link 21.00 lbs
91 17906-2 Outer Ring Assembly, (PN. 72-76 thru 72-80), models RSX & BTSX only 55.95 lbs
92 – Outer Ring & Inner Ring Assembly, models RSX & BTSX only 81.00 lbs
93 17906 Outer Ring 41.00 lbs
94 17916 Outer Ring Large Roller 1.75 lbs
95 17917 Outer Ring Small Roller, qty 5 for model CTSX only 1.00 lbs
96 17918 Roller Bushing 0.50 lbs
97 17919 Roller Pin 0.80 lbs
98 940308-1 Grease Fitting 0.01 lbs
99 17921 Outer Ring Sprocket, 4-1/2 , models RSX & BTSX only 9.00 lbs
100 941237-75 Outer Ring Sprocket Bolt (Short) 1/2″ x 1-1/4″ 0.10 lbs
101 941238-75S Outer Ring Sprocket Bolt Set, models RSX & BTSX only 1.20 lbs
102 941237-108 Outer Ring Sprocket Bolt (Long) 1/2″ x 2″ 0.30 lbs
103 941442-5 Lock Nut 0.10 lbs
104 943631-92 Outer Ring Sprocket Dowel Pin, 5/8″ x 3″ 0.60 lbs
105 17907 Inner Ring, models RSX & BTSX only 15.00 lbs
106 30862 Brake Band Assembly, 5-1/2 2.80 lbs
107 15528 Brake Band Pin 0.60 lbs
108 939643-10 Star Washer 0.01 lbs
109 17920 Jaw and Bushing Pin, models RSX & BTSX only 0.75 lbs
110 943631-69 Gear Box Cover Dowel Pin, 5/8″ x 2″ 0.30 lbs
111 32331-1 Front End Control Assembly, (Lever Style) 10.78 lbs
112 31312-1 Control Bracket Weldment, (Lever Style) 3.80 lbs
113 28019 Shift Bracket Weldment 1.80 lbs
114 28022 Shifter Rod Weldment 0.80 lbs
115 941439-2 Stover Locknut, 3/8 0.02 lbs
116 37078-1 Throttle Rod Weldment, (Lever Style) , model BTSX only 2.00 lbs
117 939370-9 Washer, 3/8″ 0.01 lbs
118 939667-10 Cotter Pin 0.01 lbs
119 28020 Clamp Plate 0.40 lbs
120 28021 Shifter Lever 0.60 lbs
121 941271-93 Hex Head Capscrew, 3/8″ x 1-1/2″ 0.05 lbs
122 941442-3 Lock Nut, 3/8″ 0.03 lbs
123 941271-93 Allen Head Capscrew, 3/8″ x 1-1/2″ 0.05 lbs
124 939369-9 High Collar Lockwasher 0.01 lbs
125 940584-86-1 Shoulder Screw, 3/4″ x 3″ 0.60 lbs
126 941442-6 Nut-Shoulder Screw, 5/8″ 0.03 lbs
127 – 2-3/8 Jaw (less insert) 5.00 lbs
128 27477-1 2-3/8 Jaw Assembly 6.00 lbs
129 – 2-7/8 Jaw (less insert) 5.00 lbs
130 27481-1 2-7/8 Jaw Assembly 6.00 lbs
131 – 4 Jaw (less insert) 3.40 lbs
132 23624-1 4 Jaw Assembly 3.80 lbs
133 – 4-1/2 Jaw (less insert) 2.60 lbs
134 24553-1 4-1/2 Jaw Assembly 3.00 lbs
135 – 2-3/8 Bushing (less inserts) 9.00 lbs
136 27645-1 2-3/8 Bushing Assembly 11.20 lbs
137 – 2-7/8 Bushing (less inserts) 8.80 lbs
138 27660-1 2-7/8 Bushing Assembly 10.20 lbs
139 – 3-1/2 Bushing (less inserts) 8.40 lbs
140 17913-1 3-1/2 Bushing Assembly 8.80 lbs
141 – 4 Bushing (less inserts) 6.80 lbs
142 23623-1 4 Bushing Assembly 7.20 lbs
143 – 4-1/2 Bushing (less inserts) 5.00 lbs
144 24552-1 4-1/2 Bushing Assembly 5.25 lbs
145 27494-1 2-3/8 Insert 1.00 lbs
146 – 2-3/8 x 1 (1.315) Reducer Insert 1.60 lbs
147 – 2-3/8 x 1-1/4 Reducer Insert 1.40 lbs
148 – 2-3/8 x 1-1/2 Reducer Insert 1.40 lbs
149 – 2-3/8 x 2-1/16 Reducer Insert 1.20 lbs
150 27498-1 2-7/8 Insert 0.80 lbs
151 – 2-7/8 x 1-1/4 Reducer Insert 1.80 lbs
152 – 2-7/8 x 1-1/2 Reducer Insert 1.80 lbs
153 – 2-7/8 x 2-1/16 Reducer Insert 1.60 lbs
154 – 2-7/8 x 2-3/8 Reducer Insert 1.40 lbs
155 6473 3-1/2 Insert 0.20 lbs
156 6473 4 Insert 0.20 lbs
157 24554 4-1/2 Insert 0.10 lbs
158 – Insert Retainer, 1/4 x 1 roll pin 0.01 lbs
159 – Insert Retainer, 1/4 x 3/4 roll pin 0.01 lbs
160 – Set Screw, 1/4-20 x 1/2 0.01 lbs

BJ Style CTSX Tubing Tong

Item # Part Number Description Approx. Weight (lbs)

35089   Hydraulic Powered Tubing Tong 35089-X   466 lbs 
35089-1 Hydraulic Powered Tubing Tong 35089-XHT 468 lbs

1 – Frame Weldment, (Model CTSX only) 139.50 lbs
2 – Case Shoulder Bolt, 3/4″ x 7-1/2″ 1.00 lbs
3 939352-6 3/4″ Lockwasher 0.02 lbs
4 93142-8 Stover Nut 3/4″ x 10 0.05 lbs
5 34898 Frame Cover 82.00 lbs
6 – Frame Cover (Model CTSX only) 81.50 lbs
7 35129-1 Brake Band Cover (Model CTS Only) 9.63 lbs
8 939084-3 Capscrew, Brake Band Cover 0.01 lbs
9 939349-3 Lock Washer, Brake Band Cover Capscrew 0.01 lbs
10 – Dowel Pin 1/2″ x 3/4″ 0.01 lbs
11 939067-55 Frame Cover Bolt 5/8″ x 2″ 0.02 lbs
12 939207-6 Frame Cover Bolt 5/8″ x 2″ 0.01 lbs
13 939644-11 Frame Cover Lock Washer 5/8″ 0.01 lbs
14 943631-70 Frame Cover Dowel Pin 3/4″ x 2″ 0.20 lbs
15 30837 Guard Assembly, Top Half 6.20 lbs
16 30871 Guard, Top Half 5.40 lbs
17 30872 Guard, Bottom Half 3.00 lbs
18 15495-1 Top Guard Nut 0.60 lbs
19 15495-2 Bottom Guard Nut 0.40 lbs
20 939067-44 Guard Capscrew 1/2″ x 3/4″ 0.01 lbs
21 941439-5 Flexloc Nut 0.02 lbs
22 16448 Guard Spring 0.13 lbs
23 30874 Guard Spring Housing 0.40 lbs
24 16481 Guard Spring Housing Pin 3/8″ x 2-1/4″ 0.03 lbs
25 939067-53 Guard Spring Bolt 3/8″ x 2″ 0.02 lbs
26 16355 Hanger Pin 5/8″ x 3-1/8″ 0.20 lbs
27 947128-140 Spiral Pin (Roll Pin) 0.01 lbs
28 16683 Suspension Spring Housing 9.50 lbs
29 16378 Suspension Spring Shank 2.80 lbs
30 939484-8 Suspension Spring Shank Nut 0.08 lbs
31 939667-28 Cotter Pin 0.01 lbs
32 16446 Suspension Spring, Outer 8.68 lbs
33 27955 Suspension Spring, Inner 1.20 lbs
34 16682 Suspension Spring Washer 0.20 lbs
35 16379-1 Suspension Spring Housing Upper Cap with Eye Bolt 5.40 lbs
36 16380 Suspension Spring Housing Lower Cap 1.80 lbs
37 15495 Roller Shaft Alemite Nut 0.25 lbs
38 939537-61 Roller Shaft Elastic Stop Nut 3/4″ 0.20 lbs
39 939644-13 Roller Shaft Washer 7/8″ 0.10 lbs
40 16480 Idler Sprocket Adjusment Plate 0.60 lbs
41 939067-3 Idler Sprocket Adjusment Plate Capscrew 3/8″ x 3/4″ 0.02 lbs
42 30835 Front Idler Roller Assembly 6.05 lbs
43 15494-5 Front Roller Shaft Assembly 1.45 lbs
44 30870 Idler Roller (Front) 1.80 lbs
45 15491 Idler Roller (Back) 2.40 lbs
46 979103-4 Idler Roller Bearing 1.40 lbs
47 941157-281 Idler Roller Bearing Retaining Ring Set 0.10 lbs
48 942685-118 Idler Roller Assembly Retaining Ring Set 0.01 lbs
49 30361 Back Idler Roller Assembly 5.05 lbs
50 30360-2 Back Idler Roller Assembly 1.50 lbs
51 940895-606 Key 0.01 lbs
52 15493-1 Idler Sprocket Assembly 6.53 lbs
53 15493 Idler Sprocket 5.13 lbs
54 942384-36 Outer Idler Sprocket Bearing 0.30 lbs
55 942394-42 Inner Idler Sprocket Bearing 0.20 lbs
56 15498 Idler Sprocket Bearing Retaining Washer 0.30 lbs
57 941157-231 Idler Sprocket Bearing Retaining Ring 0.10 lbs
58 15492-2 Idler Sprocket Roller Shaft Assembly 9.60 lbs
59 15496-5 Idler Sprocket Shaft Assembly 2.30 lbs
60 15492 Idler Sprocket Roller 4.75 lbs
61 979103-4 Idler Sprocket Roller Bearing 1.40 lbs
62 941157-281 Idler Sprocket Roller Bearing Retaining Ring 0.10 lbs
63 942685-114 Idler Sprocket Roller Assembly Retaining Ring 0.10 lbs
64 15500 Idler Sprocket Spacer 0.50 lbs
65 15533 Gear Shift Handle 1.50 lbs
66 15516 Gear Shift Handle Lock Pin 0.06 lbs
67 16977 Gear Shift Handle Lock Pin Spring 0.04 lbs
68 940323-4 Gear Shift Handle Grease Fitting 0.01 lbs
69 15534 Gear Shift Shaft 2.08 lbs
70 939484-5 Gear Shift Shaft Stover Nut 5/8″ 0.01 lbs
71 23056 Gear Shift Shaft Bushing 0.20 lbs
72 942271-11 Gear Shift Shaft “O” Ring 0.01 lbs
73 939995-812 Gear Shift Shaft Key 0.20 lbs
74 15501 Gear Shift Actuator Yoke 1.50 lbs
75 15502 Gear Shift Finger 0.35 lbs
76 15512 High Speed Driven Gear 4.00 lbs
77 15511-1 Low Speed Driven Gear Assembly 9.35 lbs
78 15511 Low Speed Driven Gear 9.00 lbs
79 15537 Low Speed Driven Gear Bushing 0.25 lbs
80 15507 Low Speed Driven Gear Thrust Washer 0.50 lbs
81 979054-304 Sliding Gear Shaft Lower Bearing 0.40 lbs
82 979102-5304 Drive Shaft Lower Bearing 0.40 lbs
83 15505 Frame (Bottom) Gear Box Bearing Plate 0.40 lbs
84 16979 Frame (Bottom) Gear Box Bearing Plate Gasket 0.06 lbs
85 941271-25 Bearing Plate Capscrew 1/4″ x 1/2″ 0.02 lbs
86 940251-2 Gear Case Drain Plug 1/4″ 0.08 lbs
87 947915-11 Roller Chain Assembly with Connecting Link and Off 21.00 lbs
88 – Outer Ring Assembly 55.00 lbs
89 35282 Outer Ring & Inner Ring Assembly 74.50 lbs
90 17906-3 Outer Ring (Model CTSX Only) 63.40 lbs
91 17917 Outer Ring Small Roller 1.00 lbs
92 17918 Roller Bushing 0.50 lbs
93 17919 Roller Pin 0.80 lbs
94 940308-1 Grease Fitting 0.01 lbs
95 30867 Outer Ring Sprocket 5-1/2″ (Model CTSX Only) 8.00 lbs
96 941237-75 Outer Ring Sprocket Bolt (Short) 1/2″ – 1-1/4″ 0.10 lbs
97 941240-75 Outer Ring Sprocket Bolt (Short) 7/16″ x 1-1/4″ (Model CTSX only) 0.20 lbs
98 941238-75S-1 Outer Ring Sprocket Bolt Set 0.80 lbs
99 941442-5 Lock Nut 0.10 lbs
100 943631-92 Outer Ring Sprocket Dowel Pin 5/8″ x 3″ 0.60 lbs
101 31656 Inner Ring (Model CTSX only) 14.50 lbs
102 30862 Brake Band Assembly 5-1/2″ 2.80 lbs
103 15528 Brake Band Pin 0.60 lbs
104 939643-10 Star Washer 0.01 lbs
105 30868 Jaw and Bushing Pin (Model CTSX Only) 0.40 lbs
106 943631-69 Gear Box Cover Dowel Pin 5/8″ x 2″ 0.30 lbs
107 32331-1 Front End Control Assembly (Lever Style) 10.78 lbs
108 31312-1 Control Bracket Weldment (Lever Style) 3.80 lbs
109 28019 Shift Bracket Weldment 1.80 lbs
110 28022 Shifter Rod Weldment 0.80 lbs
111 941439-2 Stover Locknut 3/8″ 0.02 lbs
112 28023-1 Throttle Rod Weldment (Lever Style) 2.00 lbs
113 939370-9 Washer 3/8″ 0.01 lbs
114 939667-10 Cotter Pin 0.01 lbs
115 28020 Clamp Plate 0.40 lbs
116 28021 Shifter Lever 0.60 lbs
117 941271-93 Hex Head Capscrew 3/8″ x 1-1/2″ 0.05 lbs
118 941442-3 Lock Nut 3/8″ 0.03 lbs
119 941271-93 Allen Head Capscrew 3/8″ x 1-1/2″ 0.05 lbs
120 939369-9 High Collar Lockwasher 0.01 lbs
121 940584-86-1 Shoulder Screw 3/4″ x 3″ 0.60 lbs
122 941442-6 Nut-Shoulder Screw 5/8″ 0.03 lbs
123 34896 Hanger 7.40 lbs
124 34897 Hanger Adapter 11.80 lbs
125 939107-506 Hex Head Bolt 3/4″ x 6-1/2″ 0.80 lbs
126 939168-131 Square Head Set Screw 0.20 lbs
127 – Jam Nut 0.03 lbs
128 939053-156 Hex Head Bolt 3/4″ x 4″ 0.40 lbs
129 939502-142 Clevis Pin 3/4″ x 2-1/2″ 0.20 lbs
130 939142-8 Stover Nut 3/4″ x 10 0.50 lbs
131 939352-6 Lockwasher 3/4″ 0.02 lbs
132 6473 3-1/2″ Insert 0.20 lbs
133 – 3-1/2″ Jaw (Less Insert) 4.40 lbs
134 – 3-1/2″ Bushing (Less Insert) 14.00 lbs
BJ Style RS Back Up Assembly 2-3/8″ to 3.668″
Item # Part Number Description Approx. Weight (lbs)
160 30420-112 MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly less Outer-Inner sleeve assembly 30.50 lbs
161 30430-110 MS Backup assembly, complete with 2-3/8 to 3.668 lug jaw assembly with Outer-Inner sleeve assembly 53.42 lbs
162 943667-18 Cotter Pin 0.01 lbs
163 5206 Latch Spring 0.02 lbs
164 1573832 Die with Slot 0.34 lbs
165 6267 Short Jaw 3.20 lbs
166 – Die Retainer Screw 0.01 lbs
167 939142-8 3/4″-10 Stover Nut 0.03 lbs
168 30421-1 Long Jaw Assembly 7.60 lbs
169 30572-1 Latch Arm 3.00 lbs
170 30573 Long Jaw Spring (Y) 0.12 lbs
171 30574 Short Jaw Spring (X) 0.13 lbs
172 30575 Long Hinge Pin, 3/4 0.60 lbs
173 – MS Backup Hanger Leveling Bolt, 5/8″ x 7″ 0.40 lbs
174 28622-5 Outer-Inner sleeve assembly 22.40 lbs
175 28622 Outer Sleeve 14.60 lbs
176 28623 Inner Sleeve 7.60 lbs
177 28624 Lever 8.00 lbs
178 945031-64 Suspension Spring 0.13 lbs
BJ Style RS Back Up Assembly 3-1/2″ to 4-1/2″
Item # Part Number Description Approx. Weight (lbs)

179 – MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly less Outer-Inner sleeve assembly. 30.50 lbs
180 – MS Backup assembly, complete with 3-1/2 to 4-1/2 lug jaw assembly with Outer-Inner sleeve assembly. 48.18 lbs
181 943667-18 Cotter Pin 0.01 lbs
182 5206 Latch Spring 0.02 lbs
183 1573832 Die with Slot 0.34 lbs
184 6267 Short Jaw 3.20 lbs
185 – Die Retainer Screw 0.01 lbs
186 30359-1 Hex Head Bolt, 3/4″ x 3″ 0.40 lbs
187 939142-8 3/4″-10 Stover Nut 0.03 lbs
188 30421-1 Long Jaw Assembly 7.60 lbs
189 30424-6 Lug Jaw Assembly, 3-1/2″ to 4-1/2″ 2.99 lbs
190 13494 Short Hinge Pin, 3/4 0.40 lbs
191 30572-1 Latch Arm 3.00 lbs
192 30573 Long Jaw Spring (Y) 0.12 lbs
193 30574 Short Jaw Spring (X) 0.13 lbs
194 30575 Long Hinge Pin, 3/4 0.60 lbs
195 – MS Backup Hanger Leveling Bolt, 5/8″ x 7″ 0.40 lbs
196 28622-5 Outer-Inner sleeve assembly 22.40 lbs
197 28622 Outer Sleeve 14.60 lbs
198 28623 Inner Sleeve 7.60 lbs
199 28624 Lever 8.00 lbs
200 945031-64 Suspension Spring 0.13 lbs
BJ Style RS Tubing Tong
Item # Part Number Description Approx. Weight (lbs)

1 34891 Hydraulic Powered Tubing Tong 34891-X 452.00 lbs
2 34891-1 Hydraulic Powered Tubing Tong 34891-XHT 454.00 lbs
3 34893 Frame Weldment 140.00 lbs
4 – Case Shoulder Bolt, 3/4″ X 7-1/2″ 1.00 lbs
5 939352-6 3/4″ Lockwasher 0.02 lbs
6 939142-8 Stover Nut, 3/4″-10 0.05 lbs
7 34898 Frame Cover 82.00 lbs
8 35129 Brake Band Cover, models RSX & BTSX only 9.63 lbs
9 35129-1 Brake Band Cover, model CTS only 9.63 lbs
10 939084-3 Capscrew, Brake Band Cover 0.01 lbs
11 939349-3 Lock Washer, Brake Band Cover Capscrew 0.01 lbs
12 – Dowel Pin, 1/2″ x 3/4″ 0.01 lbs
13 939067-55 Frame Cover Bolt, 5/8″ x 2″ 0.02 lbs
14 939207-6 Frame Cover Nut, 5/8 0.01 lbs
15 939644-11 Frame Cover Lock Washer, 5/8 0.01 lbs
16 943631-70 Frame Cover Dowel Pin, 3/4″ x 2″ 0.20 lbs
17 30837 Guard Assembly, Top Half (PN. 72-5, 72-11, 72-12) 6.20 lbs
18 30871 Guard, Top Half 5.40 lbs
19 30872 Guard, Bottom Half 3.00 lbs
20 15495-1 Top Guard Nut 0.60 lbs
21 15495-2 Bottom Guard Nut 0.40 lbs
22 939067-44 Guard Capscrew, 1/2″ x 1-3/4 0.01 lbs
23 941439-5 Flexloc Nut 0.02 lbs
24 16448 Guard Spring 0.13 lbs
25 30874 Guard Spring Housing 0.40 lbs
26 16481 Guard Spring Housing Pin, 3/8″ x 2-1/4 0.03 lbs
27 939067-53 Guard Spring Bolt, 3/8″ x 2″ 0.02 lbs
28 16355 Hanger Pin, 5/8″ x 3-1/8″ 0.20 lbs
29 947128-140 Spiral Pin, (roll pin) 0.01 lbs
30 16683 Suspension Spring Housing 9.50 lbs
31 16378 Suspension Spring Shank 2.80 lbs
32 939484-8 Suspension Spring Shank Nut 0.08 lbs
33 939667-28 Cotter Pin 0.01 lbs
34 16446 Suspension Spring, Outer 8.68 lbs
35 27955 Suspension Spring, Inner 1.20 lbs
36 16682 Suspension Spring Washer 0.20 lbs
37 16379-1 Suspension Spring Housing Upper Cap with Eye Bolt and Nut 5.40 lbs
38 16380 Suspension Spring Housing Lower Cap 1.80 lbs
39 15495 Roller Shaft Alemite Nut 0.25 lbs
40 939537-61 Roller Shaft Elastic Stop Nut, 3/4″ 0.20 lbs
41 939644-13 Roller Shaft Washer, 7/8″ 0.10 lbs
42 16480 Idler Sprocket Adjustment Plate 0.60 lbs
43 939067-3 Idler Sprocket Adjustment Plate Capscrew, 3/8″ x 3/4″ 0.02 lbs
44 30835 Front Idler Roller Assembly (PN. 72-35 thru 72-39) 6.05 lbs
45 15494-5 Front Idler Roller Shaft Assembly 1.45 lbs
46 30870 Idler Roller (Front) 1.80 lbs
47 15491 Idler Roller (Back) 2.40 lbs
48 979103-4 Idler Roller Bearing 1.40 lbs
49 941157-281 Idler Roller Bearing Retaining Ring 0.10 lbs
50 942685-118 Idler Roller Assembly Retaining Ring Set 0.01 lbs
51 30361 Back Idler Roller Assembly (PN. 72-41 and 72-36A thru 72-39) 5.05 lbs
52 30360-2 Back Idler Roller Shaft Assembly 1.50 lbs
53 940895-606 Key 0.01 lbs
54 15493-1 Idler Sprocket Assembly (PN. 72-43 thru 72-46) 6.53 lbs
55 15493 Idler Sprocket 5.13 lbs
56 942384-36 Outer Idler Sprocket Bearing 0.30 lbs
57 942394-42 Inner Idler Sprocket Bearing 0.20 lbs
58 15498 Idler Sprocket Bearing Retaining Washer 0.30 lbs
59 941157-231 Idler Sprocket Bearing Retaining Ring 0.10 lbs
60 15492-2 Idler Sprocket Roller Shaft Assembly (PN. 72-46A thru 72-50) 9.60 lbs
61 15496-5 Idler Sprocket Shaft Assembly 2.30 lbs
62 15492 Idler Sprocket Roller 4.75 lbs
63 979103-4 Idler Sprocket Roller Bearing 1.40 lbs
64 941157-281 Idler Sprocket Roller Bearing Retaining Ring 0.10 lbs
65 942685-114 Idler Sprocket Roller Assembly Retaining Ring 0.10 lbs
66 15500 Idler Sprocket Spacer 0.50 lbs
67 15533 Gear Shift Handle 1.50 lbs
68 15516 Gear Shift Handle Lock Pin 0.06 lbs
69 16977 Gear Shift Handle Lock Pin Spring 0.04 lbs
70 940323-4 Gear Shift Handle Grease Fitting 0.01 lbs
71 15534 Gear Shift Shaft 2.08 lbs
72 939484-5 Gear Shift Shaft Stover Nut, 5/8″ 0.01 lbs
73 23056 Gear Shift Shaft Bushing 0.20 lbs
74 942271-11 Gear Shift Shaft “0” Ring 0.01 lbs
75 939995-812 Gear Shift Shaft Key 0.20 lbs
76 15501 Gear Shift Actuator Yoke 1.50 lbs
77 15502 Gear Shift Finger 0.35 lbs
78 15512 High Speed Driven Gear 4.00 lbs
79 15511-1 Low Speed Driven Gear Assembly (PN. 72-64 and 72-65) 9.35 lbs
80 15511 Low Speed Driven Gear 9.00 lbs
81 15537 Low Speed Driven Gear Bushing 0.25 lbs
82 15507 Low Speed Driven Gear Thrust Washer 0.50 lbs
83 979054-304 Sliding Gear Shaft Lower Bearing 0.40 lbs
84 979102-5304 Drive Shaft Lower Bearing 0.40 lbs
85 15505 Frame (Bottom) Gear Box Bearing Plate 0.40 lbs
86 16979 Frame (Bottom) Gear Box Bearing Plate Gasket 0.06 lbs
87 941271-25 Bearing Plate Capscrew, 1/4″ x 1/2″ 0.02 lbs
88 940251-2 Gear Case Drain Plug, 1/4″ 0.08 lbs
89 947915-11 Roller Chain Assembly with Connecting Link and Offset Link 21.00 lbs
90 17906-2 Outer Ring Assembly, (PN. 72-76 thru 72-80), models RSX & BTSX only 55.95 lbs
91 – Outer Ring & Inner Ring Assembly, models RSX & BTSX only 81.00 lbs
92 17906 Outer Ring 41.00 lbs
93 17916 Outer Ring Large Roller 1.75 lbs
94 17917 Outer Ring Small Roller, qty 5 for model CTSX only 1.00 lbs
95 17918 Roller Bushing 0.50 lbs
96 17919 Roller Pin 0.80 lbs
97 940308-1 Grease Fitting 0.01 lbs
98 17921 Outer Ring Sprocket, 4-1/2 , models RSX & BTSX only 9.00 lbs
99 941237-75 Outer Ring Sprocket Bolt (Short) 1/2″ x 1-1/4″ 0.10 lbs
100 941238-75S Outer Ring Sprocket Bolt Set, models RSX & BTSX only 1.20 lbs
101 941237-108 Outer Ring Sprocket Bolt (Long) 1/2″ x 2″ 0.30 lbs
102 941442-5 Lock Nut 0.10 lbs
103 943631-92 Outer Ring Sprocket Dowel Pin, 5/8″ x 3″ 0.60 lbs
104 17907 Inner Ring, models RSX & BTSX only 15.00 lbs
105 30862 Brake Band Assembly, 5-1/2 2.80 lbs
106 15528 Brake Band Pin 0.60 lbs
107 939643-10 Star Washer 0.01 lbs
108 17920 Jaw and Bushing Pin, models RSX & BTSX only 0.75 lbs
109 943631-69 Gear Box Cover Dowel Pin, 5/8″ x 2″ 0.30 lbs
110 32331-1 Front End Control Assembly, (Lever Style) 10.78 lbs
111 31312-1 Control Bracket Weldment, (Lever Style) 3.80 lbs
112 28019 Shift Bracket Weldment 1.80 lbs
113 28022 Shifter Rod Weldment 0.80 lbs
114 941439-2 Stover Locknut, 3/8 0.02 lbs
115 28023-1 Throttle Rod Weldment, (Lever Style), models RSX & CTSX only 2.00 lbs
116 939370-9 Washer, 3/8″ 0.01 lbs
117 939667-10 Cotter Pin 0.01 lbs
118 28020 Clamp Plate 0.40 lbs
119 28021 Shifter Lever 0.60 lbs
120 941271-93 Hex Head Capscrew, 3/8″ x 1-1/2″ 0.05 lbs
121 941442-3 Lock Nut, 3/8″ 0.03 lbs
122 941271-93 Allen Head Capscrew, 3/8″ x 1-1/2″ 0.05 lbs
123 939369-9 High Collar Lockwasher 0.01 lbs
124 940584-86-1 Shoulder Screw, 3/4″ x 3″ 0.60 lbs
125 941442-6 Nut-Shoulder Screw, 5/8″ 0.03 lbs
126 – 2-3/8 Jaw (less insert) 5.00 lbs
127 27477-1 2-3/8 Jaw Assembly 6.00 lbs
128 – 2-7/8 Jaw (less insert) 5.00 lbs
129 27481-1 2-7/8 Jaw Assembly 6.00 lbs
130 – 4 Jaw (less insert) 3.40 lbs
131 23624-1 4 Jaw Assembly 3.80 lbs
132 – 4-1/2 Jaw (less insert) 2.60 lbs
133 24553-1 4-1/2 Jaw Assembly 3.00 lbs
134 – 2-3/8 Bushing (less inserts) 9.00 lbs
135 27645-1 2-3/8 Bushing Assembly 11.20 lbs
136 – 2-7/8 Bushing (less inserts) 8.80 lbs
137 27660-1 2-7/8 Bushing Assembly 10.20 lbs
138 – 3-1/2 Bushing (less inserts) 8.40 lbs
139 17913-1 3-1/2 Bushing Assembly 8.80 lbs
140 – 4 Bushing (less inserts) 6.80 lbs
141 23623-1 4 Bushing Assembly 7.20 lbs
142 – 4-1/2 Bushing (less inserts) 5.00 lbs
143 24552-1 4-1/2 Bushing Assembly 5.25 lbs
144 27494-1 2-3/8 Insert 1.00 lbs
145 – 2-3/8 x 1 (1.315) Reducer Insert 1.60 lbs
146 – 2-3/8 x 1-1/4 Reducer Insert 1.40 lbs
147 – 2-3/8 x 1-1/2 Reducer Insert 1.40 lbs
148 – 2-3/8 x 2-1/16 Reducer Insert 1.20 lbs
149 27498-1 2-7/8 Insert 0.80 lbs
150 – 2-7/8 x 1-1/4 Reducer Insert 1.80 lbs
151 – 2-7/8 x 1-1/2 Reducer Insert 1.80 lbs
152 – 2-7/8 x 2-1/16 Reducer Insert 1.60 lbs
153 – 2-7/8 x 2-3/8 Reducer Insert 1.40 lbs
154 6473 3-1/2 Insert 0.20 lbs
155 6473 4 Insert 0.20 lbs
156 24554 4-1/2 Insert 0.10 lbs
157 – Insert Retainer, 1/4 x 1 roll pin 0.01 lbs
158 – Insert Retainer, 1/4 x 3/4 roll pin 0.01 lbs
159 – Set Screw, 1/4-20 x 1/2 0.01 lbs