Drilling Rig Chain Oilfield Chain Drawworks Chain Transmission Chain 1327

Posted on by drillingbase.com

Mud pumps Chain
Draw works Chain
Engine Compounds Chain
Transmission drives Chain
Rotary countershafts Chain
Rotary tables Chain
Low and high drum Chain
Tubing Injection Chain
Jacking pump Chain
Drilling rig Chain
Workover rig Chain

TABLE 4. 120-1 THROUGH 120-8, 121-1 THROUGH 121-3 (121 SERIES REPLACES 472 SERIES)

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Dia.

Link Plate  Pin

Dia.

Transverse

Pitch

Pin Average Tensile Strength Through-   Average

Weight

Riveted Cottered

  P W D ■H T d E L L1 L2 L3 L4 Hardened Pin      
  in. in. in. in. in. in. in. in. in. in. in. in. lbf . lbs ./ft.    
120-1 through 120-8
120-1 1.500 1.000 0.875 1.425 0.187 0.437 – 1.955 1.119 1.071 1.119 0.989 45,100 4.14 STD STD
120-2 1.500 1.000 0.875 1.425 0.187 0.437 1.789 3.767 1.119 1.071 1.119 0.989 90,200 8.27 STD STD
120-3 1.500 1.000 0.875 1.425 0.187 0.437 1.789 5.556 1.119 1.071 1.119 0.989 135,300 12.10 MTO STD
120-4 1.500 1.000 0.875 1.425 0.187 0.437 1.789 7.345 1.119 1.071 1.119 0.989 180,400 16.17 MTO STD
120-5 1.500 1.000 0.875 1.425 0.187 0.437 1.789 9.134 1.119 1.071 1.119 0.989 225,500 20 24 MTO STD
120-6 1.500 1.000 0.875 1.425 0.187 0.437 1.789 10.923 1.119 1.071 1.119 0.989 270,600 24 20 MTO STD
120-8 1.500 1.000 0.875 1.425 0.187 0.437 1.789 14.501 1.119 1.071 1.119 0.989 360,800 32 27 MTO STD

121-1 through 121-3
121-1 1.500 0.750 0.875 1.425 0.187 0.437 – 1.955 – – 0.994 0.864 45,100 3.30 STD STD
121-2 1.250 0.755 0.750 1.180 0.156 0.375 1.546 3.274 – – 0.994 0.864 90,200 6.76 MTO STD
121-3 1.250 0.755 0.750 1.180 0.156 0.375 1.546 4.820 – – 0.994 0.864 135,300 10.08 MTO STD

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 3. 80-1 THROUGH 80-8, 100-1 THROUGH 100-8

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Dia.

Link Plate  Pin

Dia.

Transverse

Pitch

Pin Average Tensile Strength Through-   Average

Weight

Riveted Cottered

  P W D H T d E L L1 L2 L3 L4 Hardened Pin      
  in. in. in. in. in. in. in. in. in. in. in. in. lbf. lbs ./ft.    
80-1 through 80-8
80-1 1.000 0.627 0.625 0.943 0.125 0.313 – 1.283 0.768 0.638 0.857 0.642 21,500 1.87 STD STD
80-2 1.000 0.627 0.625 0.943 0.125 0.313 1.155 2.439 0.768 0.638 0.857 0.642 43,000 3.74 STD STD
80-3 1.000 0.627 0.625 0.943 0.125 0.313 1.155 3.594 0.768 0.638 0.857 0.642 64,500 5.60 STD STD
80-4 1.000 0.627 0.625 0.943 0.125 0.313 1.155 4.749 0.768 0.638 0.857 0.642 86,000 7.44 MTO STD
80-5 1.000 0.627 0.625 0.943 0.125 0.313 1.155 5.904 0.768 0.638 0.857 0.642 107,500 9.03 MTO STD
80-6 1.000 0.627 0.625 0.943 0.125 0.313 1.155 7.059 0.768 0.638 0.857 0.642 129,000 10 82 MTO STD
80-8 1.000 0.627 0.625 0.943 0.125 0.313 1.155 9.369 0.768 0.638 0.857 0.642 172,000 14.43 MTO STD

100-1 through 100-8

100-1 1.250 0.755 0.750 1.180 0.156 0.375 – 1.595 0.908 0.785 0.912 0.785 33,000 2.80 STD STD
100-2 1.250 0.755 0.750 1.180 0.156 0.375 1.411 2.981 0.908 0.785 0.912 0.785 66,000 5.60 STD STD
100-3 1.250 0.755 0.750 1.180 0.156 0.375 1.411 4.392 0.908 0.785 0.912 0.785 99,000 8.47 MTO STD
100-4 1.250 0.755 0.750 1.180 0.156 0.375 1.411 5.803 0.908 0.785 0.912 0.785 132,000 11.11 MTO STD
100-5 1.250 0.755 0.750 1.180 0.156 0.375 1.411 7.214 0.908 0.785 0.912 0.785 165,000 13.97 MTO STD
100-6 1.250 0.755 0.750 1.180 0.156 0.375 1.411 8.625 0.908 0.785 0.912 0.785 198,000 16.72 MTO STD
100-8 1.250 0.755 0.750 1.180 0.156 0.375 1.411 11.447 0.908 0.785 0.912 0.785 264,000 22 29 MTO STD

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .Oilfield ChainTABLE 1. DRIVES ROLLER CHAIN

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Diameter

Average

Weight

Riveted Cottered

P W D
    in. in. lbs.    
35 0.375 0.189 0.200 0.141 STD –
40 0.500 0.313 0.313 0.420 STD –
50 0.625 0.376 0.400 0.713 STD –
60 0.750 0.500 0.469 1.067 STD STD
80 1.000 0.627 0.625 1.868 STD STD
100 1.250 0.755 0.750 2.801 STD STD
120 1.500 1.000 0.875 4.135 STD STD
140 1.750 1.000 1.000 5.136 STD STD
160 2.000 1.250 1.126 6.603 STD STD
180 2.250 1.400 1.406 9.100 MTO STD
200 2.500 1.490 1.562 10.900 MTO STD
240 3.000 1.864 1.875 16.400 MTO STD

TABLE 2. DRIVES CHAIN TABLE

Chain Drive Rig Horsepower
4000 3000 2000 1500 1000 750 500
 

  1. Rotary Table 160-2 160-2 160-2 160-2 140-2 140-2 140-1
    264-1 140-2 160-1 160-1 120-1
    2 . Rotary Countershaft 160-2 160-2 160-2 160-2 140-2 140-2 140-1
    264-1 140-2 160-1 160-1 120-1
  2. High Drum 240-3 264-3 160-4 160-3 140-3

160-2

160-2

140-2

120-3

140-2

  1. Low Drum 240-3 264-3 160-4 160-3 140-3 160-2 120-3
    160-2 140-3 140-2
    5 . Cat Shaft 160-2 160-2 160-2 160-1 160-1 160-1 140-1
    264-1 140-2 140-2 140-2 120-1
    6 Transmission 140-8 160-4 160-4 160-3 160-2 140-2 120-2
    264-3 160-3 140-3 100-3
              120-3   100-3
  2. Drawworks Input 140-8 120-8 120-6 120-4 120-4 100-4 100-4
  3. Compound 140-8 120-8 120-6 120-4 120-3

120-4

100-4   100-3
  1. & 10. Mud Pump Drives 140-8 120-8 120-8 120-6 120-4 100-6 100-4
    120-6 120-4 120-3 100-4 100-3

TABLE 5. 140-1 THROUGH 140-8, 160-1 THROUGH 160-8 AND 180-1 THROUGH 180-4

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Dia.

Link Plate  Pin

Dia.

Transverse

Pitch

Pin Average Tensile Strength Through-   Average

Weight

Riveted Cottered

  P W D ■H T d E L L1 L2 L3 L4 Hardened Pin      
  in. in. in. in. in. in. in. in. in. in. in. in. lbf . lbs ./ft.    
140-1 through 140-8
140-1 1.750 1.000 1.000 1.663 0.220 0.500 – 2.136 1.253 1.150 1.253 1.068 57,450 5.14 STD STD
140-2 1.750 1.000 1.000 1.663 0.220 0.500 1.924 4.060 1.253 1.150 1.253 1.068 114,900 10 27 STD STD
140-3 1.750 1.000 1.000 1.663 0.220 0.500 1.924 5.984 1.253 1.150 1.253 1.068 172,350 15 29 MTO STD
140-4 1.750 1.000 1.000 1.663 0.220 0.500 1.924 7.908 1.253 1.150 1.253 1.068 229,800 20.46 MTO STD
140-5 1.750 1.000 1.000 1.663 0.220 0.500 1.924 9.832 1.253 1.150 1.253 1.068 287,250 25 52 MTO STD
140-6 1.750 1.000 1.000 1.663 0.220 0.500 1.924 11.756 1.253 1.150 1.253 1.068 344,700 30.69 MTO STD
140-8 1.750 1.000 1.000 1.663 0.220 0.500 1.924 15.604 1.253 1.150 1.253 1.068 459,600 40.92 MTO STD

160-1 th ough 161  
160-1 2.000 1.250 1.126 1.899 0.252 0.563 – 2.538 1.454 1.370 1.454 1.269 72,800 6.60 STD STD
160-2 2.000 1.250 1.126 1.899 0.252 0.563 2.305 4.843 1.454 1.370 1.454 1.269 145,600 13 21 STD STD
160-3 2.000 1.250 1.126 1.899 0.252 0.563 2.305 7.148 1.454 1.370 1.454 1.269 218,400 20.79 MTO STD
160-4 2.000 1.250 1.126 1.899 0.252 0.563 2.305 9.453 1.454 1.370 1.454 1.269 291,200 27.83 MTO STD
160-5 2.000 1.250 1.126 1.899 0.252 0.563 2.305 11.758 1.454 1.370 1.454 1.269 364,000 34.76 MTO STD
160-6 2.000 1.250 1.126 1.899 0.252 0.563 2.305 14.063 1.454 1.370 1.454 1.269 436,800 41.69 MTO STD
160-8 2.000 1.250 1.126 1.899 0.252 0.563 2.305 18.673 1.454 1.370 1.454 1.269 582,400 55.50 MTO STD

180-1 through 180-4

180-1 2.250 1.400 1.406 2.132 0.281 0.687 – 2.780 1 561 1 390 1.561 1 390 95,000 9.10 STD STD
180-2 2.250 1.400 1.406 2.132 0.281 0.687 2.592 5.372 1.561 1.390 1.561 1.390 190,000 18.10 STD STD
180-3 2.250 1.400 1.406 2.132 0.281 0.687 2.592 7.964 1.561 1.390 1.561 1.390 285,000 27.01 MTO MTO
180-4 2.250 1.400 1.406 2.132 0.281 0.687 2.592 10.556 1.561 1.390 1.561 1.390 380,000 35.91 MTO MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 6. 200-1 THROUGH 200-4, 264-1 THROUGH 264-4, 240-1 THROUGH 240-4 AND 241-1

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Dia.

Link Plate  Pin

Dia.

Transverse

Pitch

Pin Average Tensile Strength Through-   Average

Weight

Riveted Cottered

  P W D ■H T d E L L1 L2 L3 L4 Hardened Pin      
  in. in. in. in. in. in. in. in. in. in. in. in. lbf. lbs . /ft .    
200-1 through 200-4
200-1 2.500 1.500 1.562 2.312 0.312 0.781 – 3.088 1.889 1.544 1.889 1.544 100,000 10 90 STD STD
200-2 2.500 1.500 1.562 2.312 0.312 0.781 2.817 5.905 1.889 1.544 1.889 1.544 200,000 21.00 STD STD
200-3 2.500 1.500 1.562 2.312 0.312 0.781 2.817 8.722 1.889 1.544 1.889 1.544 300,000 31.50 MTO STD
200-4 2.500 1.500 1.562 2.312 0.312 0.781 2.817 11.539 1.889 1.544 1.889 1.544 400,000 42 10 MTO MTO
264-1 through 264-4
264-1 2.500 1.490 1.562 2.375 0.375 0.875 – 3.687 2.015 1.672 2.015 1.672 135,000 12 40 STD STD
264-2 2.500 1.490 1.562 2.375 0.375 0.875 3.083 6.770 2.015 1.672 2.015 1.672 270,000 24.90 STD STD
264-3 2.500 1.490 1.562 2.375 0.375 0.875 3.083 9.853 2.015 1.672 2.015 1.672 405,000 37.30 MTO STD
264-4 2.500 1.490 1.562 2.375 0.375 0.875 3.083 12.936 2.015 1.672 2.015 1.672 540,000 49.80 MTO STD
240-1 through 240-4
240-1 3.000 1.864 1.875 2.812 0.375 0.937 – 3.708 2.212 1.854 2.212 1.854 152,200 16 40 STD STD
240-2 3.000 1.864 1.875 2.812 0.375 0.937 3.458 7.166 2.212 1.854 2.212 1.854 304,400 32.20 MTO STD
240-3 3.000 1.864 1.875 2.812 0.375 0.937 3.458 2.780 2.212 1.854 2.212 1.854 456,600 49.40 MTO STD
240-4 3.000 1.864 1.875 2.812 0.375 0.937 3.458 7.166 2.212 1.854 2.212 1.854 608,800 65.70 MTO STD

241-1              3.000               1.250              1. 875       2.812        0.375       0.937              –               3.094            –                 –             1.905       1. 547                152,200                   16. 20 MTO MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

TABLE 7. A.P.I. 7F HEAVY-SERIES OIL FIELD ROLLER CHAIN PRODUCTS

Chain

No.

Pitch   Min . Roller Link Inside Width  Roller

Dia.

Link Plate  Pin.

Dia.

Transverse

Pitch

Pin Average Tensile Strength Through- Hardened Pins Average

Weight

Riveted Cottered

  P W D H T d   L L3 L4      
in. in. in. in. in. in. in. in. in. in. lbf. lbs ./ft.  
60HZ-1 0.750 0.500 0.469 0.709 0.125 0.234 1.028 1.140 0.650 0.570 12,500 1.27 STD MTO
80HZ-1 1.000 0.625 0.625 0.949 0.156 0.312 1.283 1.413 0.839 0.707 21,500 2.24 STD STD
100HZ-1 1.250 0.750 0.750 1.186 0.187 0.375 1.539 1.725 0.993 0.863 33,000 3.28 STD STD
120HZ-1 1.500 1.000 0.875 1.425 0.219 0.437 1.925 2.085 1.186 1.043 45,100 4.61 STD STD
140HZ-1 1.750 1.000 1.000 1.663 0.250 0.500 2.055 2.260 1.313 1.130 57,450 5.80 STD STD
160HZ-1 2.000 1.250 1.126 1.899 0.283 0.563 2.437 2.673 1.520 1.339 72,800 7.55 STD STD
180HZ-1 2.250 1.400 1.406 2.132 0.312 0.687 2.716 2.968 1.641 1.484 95,000 10.25 MTO MTO
264Z-1 2.500 1.490 1.562 2.375 0.375 0.875 3.083 3.344 2.015 1.672 135,000 12 40 MTO STD
240HZ-1 3.000 1.875 1.875 2.850 0.500 0.937 3.984 4.265 2.453 2.157 217,000 19 57 MTO MTO

Dimensions are subject to change . Contact Timken Drives to obtain certified prints for design and construction .

COIL TUBING INJECTOR CHAIN TO FIT OEM GRIPPER BLOCKS

Premium oil field chain features include:

All ballized plates .
Wide waisted link plates.
Through-hardened shotpeened pins .
Special hook cotter.
Coated T-pin .

Please call your nearest location for sales and service .
TABLE 9. COIL TUBE CHAIN KITS AVAILABLE

Manufacturer Coiled Tube Unit Model Chain Size
National Oilwell RT10 120-3
National Oilwell RT20 120-3
National Oilwell RT30 120-3
National Oilwell RT3238 120-3
National Oilwell RT25 120-3
National Oilwell RT60 160-4
National Oilwell RT100 160-4
Hydra Rig HR560/660 180-4
Hydra Rig HR580/680 200-4
Hydra Rig HR440 180-3
Hydra Rig HR480 200-3
Hydra Rig HR5100 180-6
Hydra Rig HR635 140-5

TABLE 10. COIL TUBE CHAIN ASSEMBLIES AVAILABLE

Manufacturer Coiled Tube Unit Model Chain Size Strand Number of Strands Required
Stewart & Stevenson Short unit 160-1 w/D3 14 pitch 8
Stewart & Stevenson Long unit 160-1 w/D3 14 pitch 10
Stewart & Stevenson Short unit 160H-1 w/D3 14 pitch 8
Stewart & Stevenson Long unit 160H-1 w/D3 14 pitch 10

This entry was posted in Resources. Bookmark the permalink.