HYC SLIP TYPE ELEVATOR
Introduction
The Y Series Type Slip Elevators are hoisting tools for handling tubing, drill pipe, casing, electric submersible pump and other tubular goods in oil and gas fields. It is especially fit to integral joint tubing and non-coupled casing. It is constructed in two halves of practically the same weight, four slip bodies and some inserts, providing balance and easier opening and closing. They are designed and manufactured according to API Spec 8A/8C－specification for drilling and production Hoisting Equipment.
Main Specification:
Type Description Pipe O.D Max. load
Slip assembly Slip setting ring Insert tons kN
YT/75,
HYT/150-200,
MYT/40 3.1/2 27813 3.1/2（24774） 3.1/2-2.7/8 75
150
200
6751350
1800
27695 2.7/8（30358）
2.7/8 27695 2.7/8（24773） 2.7/8-1.315
27694 2.3/8（29255）
27812 2.1/16（29256）
28821 2（29256）
27811 1.9（29257）
27810 1.66（29258）
29001 1.315（29259）
2.7/8 29348 2.7/8（24773） 2.7/8-1.315 40 360
29345 2.3/8（29255）
29350 2.1/16（29256）
29351 2（29256）
29352 1.9（29257）
29353 1.66（29258）
29354 1.315（29259）
YC/75
HYC/150-200
7.5/8(HYC) 55516 7.5/8(70010) 7.5/8 75150
200
6751350
1800
7 30229 7（16407） 7-6.5/8
30226 6.5/8（24748）
5.1/2 30223 5.1/2（16407） 5.1/2-5
30220 5（24783）
4.1/2 30219 4.1/2（16408） 4.1/2-3.1/2
30209 4（24781）
34932 3.1/2（24779）
Exploded Drawing for HYC SLIP TYPE ELEVATOR
Spare Parts List for HYC SLIP TYPE ELEVATOR
S/N Name QTY Parts No. S/N Name QTY Parts No.
1 Bolts 1 2 20 Slip springs 4 030101017
2 Lock nuts 2 21 Slip bolts 4
3 Bolts 2 22 Spring washers 4
4 Slotted nuts 2 23 setting plate bolt 4 010804027
5 Cotter pins 2 24 Rubber sleeves 4 010804029
6 Lind block 2 011101027 25 3.1/2 setting ring 1 010804018
7 Left main bodies 2 010804001 4 setting ring 1 010804019
8 Lock pin 1 4.1/2 setting ring 1 010804020
9 Retainer pin 1 680 5 setting ring 1 010804021 10 Latch spring baffle 1 setting ring 1 010804022 11 Latch lock pin 1 6.5/8 setting ring 1 010804023 12 Latch latch spring 1 030102010 7 setting ring 1 010804024 13 Latch lock 1 0 7.5/8 setting ring 1 010804025 14 Right main body 1 010804002 26 Hinge pin 1 010804003 15 3.1/2-4.1/2 insert retainer plate 4 010802014 27 Grease fitting 1 1/8 5 insert retainer plate 4 010802015 28 3.1/2 insert 24 001605089 5.1/2 insert retainer plate 4 010802016 4 insert 24 001605090 6.5/8 insert retainer plate 4 010802017 4.1/2 insert 24 001605091 7 insert retainer plate 4 010802024 5 insert 36 001605092 7.5/8 insert retainer plate 4 010802026 5.1/2 insert 36 001605093 16 Inner hex-bolts 4 1/2-13UNC 6.5/8 insert 48 001605094 17 Latch 1 010804004 7 insert 48 001605093 18 Latch spring 1 030102010 7.5/8 insert 48 001605095 19 3.1/2-4.1/2 slip bodies 4 010804014 29 3.1/2-7 setting ring retainer 2 010802027 5-5.1/2 slip bodies 4 010804015 7.5/8 setting ring retainer 2 010804026 6.5/8-7 slip bodies 4 010804016 30 Retainer pin 1 10155
7.5/8 slip bodies 4 010804017
350/500 TON CASING SPIDER/ELEVATOR
Introduction
The 350 and 500 Ton Casing Elevator/Spider Units are pneumatically operated power tools, capable of handing casing sizes from 4.1/2 to 14 inches, with string loads of 3150KN(700,000 pounds) for the 350 ton unit and 4500KN(1,000,000 pounds) for the 500 ton unit.
These units have been refined and incorporate such engineering features as air powered operation with safety latch, and four independent slips as standard equipment. The main bodies can be dressed as a casing elevator or spider. The elevator consists of an upper unit using a bell guide and bottom guide. The lower unit is dressed as a Spider with a top guide that centers the Spider over the master bushing.
The elevator is attached to the derrick traveling block and hook with 350 or 500 ton standard API links.
The Spider locates directly on the pin drive master bushing (27.1/2 MSPC, 37.1/2 and 49.1/2 MPCH), and square drive master bushing (27.1/2 MSS), and will accommodate any other master bushing when used with an Adapter Plate of RT Company.
Operation
The Elevator/Spider operates form a single, 2 position control lever that raises and lowers the slips. The slips are suspended on two inter-locking leveling beams that are driven by four air cylinders. This feature allows the slips to operate in synchronization in both the set and raised positions, while permitting the cylinders to work together so no one cylinder overrides any other, causing misalignment and binding. A manual override system is also provided in the event of a temporary loss of rig air pressure.
The pneumatic system incorporates a filter-regulator, which regulates and filters the rig air and reduces the pressure to the requirements of the Elevator /Spider system. This filtered, regulated air pressure is then sent to the lubricator (mounted on the Elevator and Spider) to add a small amount of oil mist to lubricate the four drive cylinders. The air from the lubricator is sent to the control valve that operates the leveling beams. As directed by the control lever, the air cylinder will raise or lower the slips attached to the leveling beam.
The direct airs lift and lock mechanism enables instant actuation of the slips. In offshore or land operations this allows the derrick man or the men on the floor to raise and lock the slips, or lower the slips in the elevator or spider instantly.
Main Technical Parameters
Table 1
Spec
Item
American Units Metric500 350 500 350
Casing Size-range 4.1/2″ ~ 14″ 114 mm ~ 355.6 mm
Maximum Safe Hook Load 1,000,000 lbs 700,000 lbs 455,000kg 318,000kg
Normal Operating Pressure 70-80 PSI 4.8-5.4 atm
Maximum Pressure 125 PSI 8.5 atm
Table 2
Unit Height American Units Metric
500 350 500 350
Elevator with Bell Guide
（Less Guide and Slip Assy.）
4,265 lbs 3,600 lbs 1,941 kg 1,634 kgSpider
（Less Guide and Slip Assy.）
4,065 lbs 3,400 lbs 1,850 kg 1,543 kgTable 3
Unit Height American Units Metric
500 350 500 350
Elevator with Bell Guide 43 38 109.2 cm 96.5 cm
Spider with Guide 37 32 94 cm 81.0 cm
Bell Guide 10 10 25.4 cm 25.4 cm
Unit Diameter (Max.) 50 42.1/2 127.5 cm 107.9 cm
Table 4
Adapter Plate (27.1/2) American Units Metric
Dimensions 41.1/2″×41.1/2″×3.1/2″ 1055mm×1055mm×89mm
Weight 1000 lbs 455 kg
Table 5
Casing
Size(in)
Slip Body Size Inserts Number Beveled Inserts Number4.1/2 5.1/2 2168 32 2168B 16
5 2169 32 2169B 16
5.1/2 2170 48
6.5/8 7.5/8 2632 48 2632B 24
7 2623 48 2623B 24
7.5/8 2633 72
7.3/4 2649 72
8.5/8 9.5/8 2640 64 2640B 32
8.3/4 2650 64 2650B 32
9.5/8 2633 96
9.3/4 2649 96
9.7/8 2649 96
10.3/4 11.3/4 2640 80 2640B 40
10.7/8 2650 80 2650B 40
11.3/4 2637 120
11.7/8 2651 120
13.3/8 14 2636 80 2636B 40
13.1/2 2652 80 2652B 40
13.5/8 2653 80 2653B 40
13.3/4 2655 80 2655B 40
14 2635 120
SPARE PART LIST FOR SE 350 TON CASING ELEVATOR/SPIDER
NO. PART NO. DESCRIPTION QTY.
1 000808 Top Guide EACH 2
2 BOLT, Hex Head 3/4-10 UNC×2 6
3 LOCKWASHER 3/4 8
4 010807010 Cover 2
5 010807008 LINK PIN, Upper 4
6 010807009 LINK, Slip Hanger 4
7 NUT, Hex, 1.1/4″-12UNF 4
8 LOCKWASHER 1.1/4 4
9 FLATWASHER 1.1/4 4
10 010807007 LEVELING BEAM 2
11 LINK PIN, Lower 4
12 010808005 SCREW,Link retainer 2
13 1/8 NPT GREASE FITTING 2
14 SLIP SEGMENT
15 BOLT, SOCKET HEAD 3/4-10 UNC×2 2
16 010807065 BUTTON,Register 2
17 010807066 GUIDE,KEEPER 4
18 BOLT,Hex Head,1-8UNC×2.1/2 4
19 LOCKWASHER 1 4
20 GUIDE RING EACH 2
21 010807011 BELL GUIDE 2
22 010808001 BODY 2
23 BOLT,Hex Head, 5/8 UNC×2 8
24 LOCKWASHER 5/8″ Dia. 8
25 010807071 LYNCH PIN 4
26 COTTER PIN 5×40 8
27 HINGE PIN, Removable 1
28 010808006 HINGE PIN, Stationary 1
29 BOLT, Hex Head,1/2-13UNC×1 10
30 LOCKWASHER 1/2 18
31 010807074 LUBRICATOR MOUNTING BRACKET 1
32 BOLT, Hex Head,1/2-13UNC×1.1/2 8
33 010807075 RETAINER CYLINDER 8
34 010808003 BRACKET, Latch 2
35 010808002 Latch,Retainer 2
36 010808004 PIN 2
37 NUT 1.1/8-8UN 2
38 010807076 CONTROL VALVE and LATCH ASSEMBLY 4
39 010807068 PIN,PIVOT 1
40 COTTER PIN 3.2×40 3
41 010807069 MANUAL CONTROL BRACKET 1
42 010807070 SOCKET,MANUAL LIFT 1
43 CYLINDER 4
TYPE SE 350 TON GUIDES, SLIPS ASSEMBLIES AND INSERT NUMBERS
Casing Size (Inches) Elevator Bottom Guide No. Spider Top Guide No. Slip Set P/N Insert Set P/N Slip Body Size(in.)
4.1/2 010807025 010807012 010808008 2168-16B-24 5.1/2
5 010807026 010807013 010808009 2169-16B-24 5.1/2
5.1/2 010807027 010807014 010808010 2170-40 5.1/2
5.3/4 010807027 010807014 010808034 2170-40 5.1/2
6.5/8 010807028 010807015 010808011 2632-24B-36 7.5/8
7 010807028 010807015 010808012 2623-24B-36 7.5/8
7.5/8 010807029 010807016 010808013 2633-60 7.5/8
7.3/4 010807029 010807016 010808014 2649-60 7.5/8
8.5/8 010807030 010807017 010808015 2640-32