ZDPE ROTARY TABLE PARTS LIST
ZP-375 Rotary Table (ZDPE) Parts list
Description PN1 Lock pawl-left 105.06.01
2 Lock pawl-right 105.06.02
3 Pin, handle lock pawl 105.06.03-1
4 Grease fitting GB1152-89-M10×1
5 Pin, lock pawl 105.08.10-1
6 Plug 105.06.05(1/8″)
7 Screw, hex soc hd 105.06.10.00
8 Grease fitting GB70-85-M24×75
9 Plate, l .D 105.08.20
10 Screw GB67-85-M4×8
11 Dipstick, oil 105.08.30.00
12 Plug 105.06.07(1 1/2″)
13 Housing 105.08.20.00
14 Tongue 105.06.08
15 Cover 105.08.10.00
18 Table installation 105.08.40.00
18.1 Ring gear (spiral teeth) 105.08.40.11
18.2 Table 105.08.40.02
18.3 Bearing 2687/1049
18.4 Columnar pin 105.08.40.03
18.5 Support, bearing 105.08.40.04
18.6 O-Ring 105.08.40.05
18.7 Screw GB70-85-M24×60
18.9 Washer, spring GB93-87-24
18.10 Shim 105.08.40.06
18.11 Shim 105.08.40.07
18.12 Shim 105.08.40.08
19 Lock pawl 105.08.02
20 Pin 105.05.19
21 Pin, cotter 5×36 GB91-86-5×36
22 Kelly bushing installation 105.54.00(23/8〞～85/8〞)
22.1 Kelly bushing 105.54.01
22.2 Board 105.54.02
24 Pin 105.54.03
25 Shim 105.08.08
26 Pinion shaft assembly 105.08.50.00
35 Screw GB5783-86-M16×35
36 Washer, spring 16 GB93-87-16
37 Slinger 105.08.09
40 Sprocket retainer 105.08.14
41 Flange 105.08.15
42 Main Kelly bushing installation 105.08.07.00
42.1 Main Kelly bushing 105.08.70.04
42.2 Spacer 105.08.70.02
42.3 Board 105.08.70.03
43 Screw 105.08.03
44 Nut 105.08.04
45 Washer, spring 28×35×2 D3-3-67-28×35×2
46 Valve DN32(11/4〞) GB8465.1-87-DN32
47 Joint R11/4 GB3289.26-82(R11/4)
2.Pinion Shaft Assembly
No. Denomination Drawing No.
Pinion Shaft Assembly 105.08.50.00
1 Pinion (spiral teeth) 105.08.12
2 End-plate of bearing 105.08.50.09
3 Bearing GB283-64-32630)
4 O-Ring 105.08.50.02-470×8.6
5 Spacer 105.08.50.04
6 Drain plug 1〞 105.08.60.00
6.1 Drain plug 1〞 105.08.60.01(1〞)
6.2 Magnet 105.08.60.02
6.3 Pin, cotter 2×12 GB91-86(2×12)
7 Shaft, pinion 105.08.50.03
8 Bearing GB286-64-3630
9 ScrewX GB5783-86-M20×60
10 Washer, spring 20 GB893-87-20
11 Shim 105.08.50.05
12 Capsule 105.08.51.00
13 Shim 105.08.50.06
14 Seal, oil D7-1-67-180×220×15
15 Retainer, pinion end 105.08.50.07
16 Pinion shaft housing 105.08.50.10
17 Key 105.08.50.08
18 Sprocket retainer 105.08.50.11-150
19 Screw with head holes GB32.1-88-M16×35
23 Screw with head holes GB32.1-88-M20×45