600467 M3/65 – E – S02 600465 M3/105- E – S02
600462 M3/205- E – S02 600461 M3/305- E – S02
Power Supply
Three phase 690V – 50Hz/60Hz, 48V
Frequency converter can achieve 20Hz to the rated frequency of regulation
The number of poles
There are 6 commonly used, the other is very custom
In accordance with the following provisions of Europe
Low voltage 89/336/CE; electromagnetic compatibility 73/23/CE
Refer to the following standards
EN600034-1, EN50081-1, EN50081-2, EN50082-1, EN50082-2
performance
In the maximum eccentric force and the maximum power supply, can be continuous operation, but also can be interrupted. It depends on the type of vibrator and operating environment. For more information, please contact our technical department.
centrifugal force
Max up to 50000Kgf (490KN).
Output centrifugal force adjustment range 0 to 100%
Mechanical protection
According to EN60529, IEC529 regulations: IP66
Earthquake protection
According to EN50102, IEC68 regulations: IK08
Insulation grade
F Class (155 C); H Class (180 C) to be customized
Heat resistance
Manufacturing process using drip plastic forming
ambient temperature
From -30 to +40 degrees Celsius, the use of other environmental temperature with the manufacturers to confirm
A thermal protector
The standard vibrator is 130 DEG C (DIN44081-44082) thermistor thermistor for temperature protection or other anti frosting heater, please contact with the factory.
install
In any position can be installed, two vibrators connected by joint coupling
lubrication
All have been filling in vibrator factory lubricating oil, under normal conditions without the addition of lubricating oil, but under heavy conditions, frame size 35 and above models need to add the lubricating oil and the vibrator
Junction box
For fixing an electrical connection wire, a terminal with a special shape can be provided for fixing the power cord to avoid joint loosening.
Electric machinery
The three-phase asynchronous motor, designed to meet the vibration of the machine when starting the required maximum starting torque and torque curve design, frame size to AF33, 35 of the vibrator are vacuum injection molding process, vibrator frame more by plastic molding manufacturing.
Shell
Vibrator shell frame size 35 below the high strength Aluminum Alloy, frame size greater than using ductile iron 35, special shape design patent is beneficial to heat radiation, under normal conditions, full load operation when the temperature is much lower.
Bearing base
Ductile iron or gray cast iron.
Bearing flange flange Bearing
Ductile cast iron. The geometric structure of the flange can transmit the load to the outer shell.
Bearing Bearings
Special customization, tailored specifically for Italvibras, is applicable for both axial and radial loads.
Motor shaft shaft Motor
Aluminum alloy constant temperature quenching treatment, can reduce the stress. One end shaft extends out to connect the coupling.
Eccentric block weights Eccentric
The centrifugal force can be continuously adjusted, and the centrifugal force is indicated by the percentage of the centrifugal force. A patent system called ARS (patent number: M098A000194) can prevent the adjustment error.
Eccentric block end cap covers Weight
The Aluminum Alloy material from the shaft end of the eccentric block cover is divided into two pieces, so that can open the cover even two eccentric vibrator are connected together
Paint Painting
Spray salt test with epoxy resin powder for 500 hours at 200 C.
602301 MVSI 10/15000-S02-ACC 602300 MVSI 10/17500-S02-ACC
602319 MVSI 10/22000-S90-ACC 602313 MVSI 10/25000-S90-ACC
Power Supply
Three phase 690V – 50Hz/60Hz, 48V
Frequency converter can achieve 20Hz to the rated frequency of regulation
The number of poles
There are 6 commonly used, the other is very custom
In accordance with the following provisions of Europe
Low voltage 89/336/CE; electromagnetic compatibility 73/23/CE
Refer to the following standards
EN600034-1, EN50081-1, EN50081-2, EN50082-1, EN50082-2
performance
In the maximum eccentric force and the maximum power supply, can be continuous operation, but also can be interrupted. It depends on the type of vibrator and operating environment. For more information, please contact our technical department.
centrifugal force
Max up to 50000Kgf (490KN).
Output centrifugal force adjustment range 0 to 100%
Mechanical protection
According to EN60529, IEC529 regulations: IP66
Earthquake protection
According to EN50102, IEC68 regulations: IK08
Insulation grade
F Class (155 C); H Class (180 C) to be customized
Heat resistance
Manufacturing process using drip plastic forming
ambient temperature
From -30 to +40 degrees Celsius, the use of other environmental temperature with the manufacturers to confirm
A thermal protector
The standard vibrator is 130 DEG C (DIN44081-44082) thermistor thermistor for temperature protection or other anti frosting heater, please contact with the factory.
install
In any position can be installed, two vibrators connected by joint coupling
lubrication
All have been filling in vibrator factory lubricating oil, under normal conditions without the addition of lubricating oil, but under heavy conditions, frame size 35 and above models need to add the lubricating oil and the vibrator
Junction box
For fixing an electrical connection wire, a terminal with a special shape can be provided for fixing the power cord to avoid joint loosening.
Electric machinery
The three-phase asynchronous motor, designed to meet the vibration of the machine when starting the required maximum starting torque and torque curve design, frame size to AF33, 35 of the vibrator are vacuum injection molding process, vibrator frame more by plastic molding manufacturing.
Shell
Vibrator shell frame size 35 below the high strength Aluminum Alloy, frame size greater than using ductile iron 35, special shape design patent is beneficial to heat radiation, under normal conditions, full load operation when the temperature is much lower.
Bearing base
Ductile iron or gray cast iron.
Bearing flange flange Bearing
Ductile cast iron. The geometric structure of the flange can transmit the load to the outer shell.
Bearing Bearings
Special customization, tailored specifically for Italvibras, is applicable for both axial and radial loads.
Motor shaft shaft Motor
Aluminum alloy constant temperature quenching treatment, can reduce the stress. One end shaft extends out to connect the coupling.
Eccentric block weights Eccentric
The centrifugal force can be continuously adjusted, and the centrifugal force is indicated by the percentage of the centrifugal force. A patent system called ARS (patent number: M098A000194) can prevent the adjustment error.
Eccentric block end cap covers Weight
The Aluminum Alloy material from the shaft end of the eccentric block cover is divided into two pieces, so that can open the cover even two eccentric vibrator are connected together
Paint Painting
Spray salt test with epoxy resin powder for 500 hours at 200 C.
600467 M3/65 – S02 600465 M3/105- S02
600462 M3/205- S02 600461 M3/305- S02
Power Supply
Three phase 690V – 50Hz/60Hz, 24V
Single phase 100V-130V, 60Hz
200V-240V, 50Hz
Frequency converter can achieve 20Hz to the rated frequency of regulation
The number of poles
2 pole or 4 pole
In accordance with the following provisions of Europe
Low voltage ATEX; 94/9/EC 2006/95/EC
Refer to the following standards
61241-0 IEC/EN, 61241-1 EN, 60034-1. IEC/EN
performance
In the maximum eccentric force and the maximum power supply, can be continuous operation, but also can be interrupted. It depends on the type of vibrator and operating environment. For more information, please contact our technical department.
centrifugal force
Max up to 311Kgf (3.05KN), centrifugal force can be adjusted by the adjustable eccentric block
Mechanical protection
According to EN60529, IEC529 regulations: IP66
Earthquake protection
According to EN50102, IEC68 regulations: IK08
Insulation grade
F Class (155 C)
Heat resistance
Vacuum injection molding process
ambient temperature
From -20 to +40 C, the other temperature needs to be customized.
A thermal protector
Please customize with a thermal detector 130 C thermal protector (DIN4408144082)
install
In any position can be installed in the junction box, and the vibrator bottom, mounting holes on the same side.
lubrication
Fully sealed ball bearings, using lifetime lubrication.
Junction box
Used for fixing the electric connecting wire and strengthening the structure of the junction box, which can prevent the internal explosion. Can provide a special shape of the terminal, used to fix the power cord to avoid joint loosening.
Electric machinery
Three phase induction motor, stator coil using vacuum injection molding, the rotor is aluminum die casting
Shell
Aluminum alloy with good ductility and good ductility.
Bearing flange
Nodular cast iron, the structure can make the load evenly transmitted to the shell.
Motor shaft shaft Motor
Aluminum alloy constant temperature quenching treatment, can reduce the stress
Eccentric block weights Eccentric
Can be convenient to adjust the vibration power from 0 to 100%
Eccentric block end cap covers Weight
The Aluminum Alloy casting high strength and surface by sandblasting treatment
601514 M15/36- S02 601515 M15/81- S02
6E0311 MVSI 3/100E-S02 6E0312 MVSI 3/200E-S02 6E0313 MVSI 3/300E-S02 6E0314 MVSI 3/500E-S02
6E0381 MVSI 3/800E-S02 6E0513 MVSI 3/1100E-S02 6E0491 MVSI 3/1300E-S08 6E0504 MVSI 3/1500E-S08
6E0502 MVSI 3/1600E-S02 6E0503 MVSI 3/1800E-S02 6E0256 MVSI 3/2010E-S90 6E0257 MVSI 3/2310E-S90
6E0472 MVSI 3/5000E-S02
6E1367 MVSI 15/200E-S02 6E1372 MVSI 15/400E-S02 6E1373 MVSI 15/550E-S02 6E1408 MVSI 15/700E-S02
6E1524 MVSI 15/1100E-S02 6E1217 MVSI 15/1410E-S02 6E1219 MVSI 15/1710E-S02 6E1267 MVSI 15/2000E-S02
6E1220 MVSI 15/2410E-S08 6E1268 MVSI 15/3000E-S08 6E1221 MVSI 15/3810E-S02 6E1269 MVSI 15/4300E-S02
6E1211 MVSI 15/5010E-S02 6E1447 MVSI 15/6000E-S02 6E1204 MVSI 15/9500E-S02
6E2298 MVSI 10/200E-S02 6E2314 MVSI 10/310E-S02 6E2402 MVSI 10/550E-S02 6E2380 MVSI 10/810E-S08
6E2381 MVSI 10/1110E-S08 6E2382 MVSI 10/1400E-S08 6E2406 MVSI 10/1610E-S08 6E2407 MVSI 10/2100E-S08
6E2167 MVSI 10/2610E-S02 6E2230 MVSI 10/3000E-S02 6E2154 MVSI 10/3810E-S02 6E2204 MVSI 10/4700E-S02
6E2350 MVSI 10/5150E-S02 6E2138 MVSI 10/5200E-S02 6E2351 MVSI 10/5700E-S02 6E2136 MVSI 10/6600E-S02
6E2137 MVSI 10/10000E-S02 6E2349 MVSI 10/11200E-S02
6E2568 MVSI 075/150E-S02 6E2575 MVSI 075/250E-S02 6E2615 MVSI 075/400E-S02 6E2609 MVSI 075/660E-S08
6E2610 MVSI 075/910E-S08 6E2618 MVSI 075/1310E-S08 6E2891 MVSI 075/2110E-S02 6E2884 MVSI 075/3110E-S02
6E2515 MVSI 075/3800E-S02 6E2862 MVSI 075/4200E-S02 6E2826 MVSI 075/5300E-S02 6E2870 MVSI 075/10000E-S02
600311 MVSI 3/100-S02 600312 MVSI 3/200-S02 600313 MVSI 3/300-S02
600366 MVSI 3/700-S02 600381 MVSI 3/800-S02 600513 MVSI 3/1100-S02
600504 MVSI 3/1500-S08 600502 MVSI 3/1600-S02 600503 MVSI 3/1800-S02
600257 MVSI 3/2310-S90 600470 MVSI 3/3200-S02 600471 MVSI 3/4000-S02
600276 MVSI 3/6510-S02 600201 MVSI 3/9000-S90
601340 MVSI 15/35-S02 601341 MVSI 15/80-S02 601366 MVSI 15/100-S02 601367 MVSI 15/200-S02
601372 MVSI 15/400-S02 601373 MVSI 15/550-S02 601408 MVSI 15/700-S02 601513 MVSI 15/900-S02
601524 MVSI 15/1100-S02 601217 MVSI 15/1410-S02 601219 MVSI 15/1710-S02 601267 MVSI 15/2000-S02
601220 MVSI 15/2410-S08 601268 MVSI 15/3000-S08 601221 MVSI 15/3810-S02 601269 MVSI 15/4300-S02
601211 MVSI 15/5010-S02 601447 MVSI 15/6000-S02 601165 MVSI 15/7000-S02 601166 MVSI 15/9000-S90
601204 MVSI 15/9500-S02 601205 MVSI 15/11500-S90 601271 MVSI 15/14500-S90
602296 MVSI 10/40-S02 602297 MVSI 10/100-S02 602298 MVSI 10/200-S02 602314 MVSI 10/310-S02
602402 MVSI 10/550-S02 602403 MVSI 10/650-S02 602380 MVSI 10/810-S08 602381 MVSI 10/1110-S08
602382 MVSI 10/1400-S08 602406 MVSI 10/1610-S08 602407 MVSI 10/2100-S08 602167 MVSI 10/2610-S02
602230 MVSI 10/3000-S02 602154 MVSI 10/3810-S02 602204 MVSI 10/4700-S02 602350 MVSI 10/5150-S02
602138 MVSI 10/5200-S02 602351 MVSI 10/5700-S02 602091 MVSI 10/6500-S02 602136 MVSI 10/6600-S02
602352 MVSI 10/7000-S02 602092 MVSI 10/8000-S90 602093 MVSI 10/9000-S90 602137 MVSI 10/10000-S02
602349 MVSI 10/11200-S02 602134 MVSI 10/12000-S90 602227 MVSI 10/13000-S02 602142 MVSI 10/15000-S02
602143 MVSI 10/17500-S02 602244 MVSI 10/19500-S02 602144 MVSI 10/22000-S90 602273 MVSI 10/25000-S90
602336 MVSI 10/30000-S02
602568 MVSI 075/150-S02 602575 MVSI 075/250-S02 602615 MVSI 075/400-S02 602616 MVSI 075/530-S02
602609 MVSI 075/660-S08 602610 MVSI 075/910-S08 602618 MVSI 075/1310-S08 602619 MVSI 075/1750-S08
602891 MVSI 075/2110-S02 602884 MVSI 075/3110-S02 602515 MVSI 075/3800-S02 602862 MVSI 075/4200-S02
602826 MVSI 075/5300-S02 602827 MVSI 075/6500-S90 602551 MVSI 075/6800-S02 602870 MVSI 075/10000-S02
602863 MVSI 075/12000-S90 602871 MVSI 075/14000-S02 602872 MVSI 075/17000-S02 602873 MVSI 075/22000-S90
602535 MVSI 075/26000-S90 602589 MVSI 075/30000-S02 6025 MVSI 075/150-S02
600311 MVSI 3/100-S02 600312 MVSI 3/200-S02 600313 MVSI 3/300-S02
600366 MVSI 3/700-S02 600381 MVSI 3/800-S02 600513 MVSI 3/1100-S02
600504 MVSI 3/1500-S08 600502 MVSI 3/1600-S02 600503 MVSI 3/1800-S02
600257 MVSI 3/2310-S90 600470 MVSI 3/3200-S02 600471 MVSI 3/4000-S02
600276 MVSI 3/6510-S02 600201 MVSI 3/9000-S90
601340 MVSI 15/35-S02 601341 MVSI 15/80-S02 601366 MVSI 15/100-S02 601367 MVSI 15/200-S02
601372 MVSI 15/400-S02 601373 MVSI 15/550-S02 601408 MVSI 15/700-S02 601513 MVSI 15/900-S02
601524 MVSI 15/1100-S02 601217 MVSI 15/1410-S02 601219 MVSI 15/1710-S02 601267 MVSI 15/2000-S02
601220 MVSI 15/2410-S08 601268 MVSI 15/3000-S08 601221 MVSI 15/3810-S02 601269 MVSI 15/4300-S02
601211 MVSI 15/5010-S02 601447 MVSI 15/6000-S02 601165 MVSI 15/7000-S02 601166 MVSI 15/9000-S90
601204 MVSI 15/9500-S02 601205 MVSI 15/11500-S90 601271 MVSI 15/14500-S90
602296 MVSI 10/40-S02 602297 MVSI 10/100-S02 602298 MVSI 10/200-S02 602314 MVSI 10/310-S02
602402 MVSI 10/550-S02 602403 MVSI 10/650-S02 602380 MVSI 10/810-S08 602381 MVSI 10/1110-S08
602382 MVSI 10/1400-S08 602406 MVSI 10/1610-S08 602407 MVSI 10/2100-S08 602167 MVSI 10/2610-S02
602230 MVSI 10/3000-S02 602154 MVSI 10/3810-S02 602204 MVSI 10/4700-S02 602350 MVSI 10/5150-S02
602138 MVSI 10/5200-S02 602351 MVSI 10/5700-S02 602091 MVSI 10/6500-S02 602136 MVSI 10/6600-S02
602352 MVSI 10/7000-S02 602092 MVSI 10/8000-S90 602093 MVSI 10/9000-S90 602137 MVSI 10/10000-S02
602349 MVSI 10/11200-S02 602134 MVSI 10/12000-S90 602227 MVSI 10/13000-S02 602142 MVSI 10/15000-S02
602143 MVSI 10/17500-S02 602244 MVSI 10/19500-S02 602144 MVSI 10/22000-S90 602273 MVSI 10/25000-S90
602336 MVSI 10/30000-S02
602568 MVSI 075/150-S02 602575 MVSI 075/250-S02 602615 MVSI 075/400-S02 602616 MVSI 075/530-S02
602609 MVSI 075/660-S08 602610 MVSI 075/910-S08 602618 MVSI 075/1310-S08 602619 MVSI 075/1750-S08
602891 MVSI 075/2110-S02 602884 MVSI 075/3110-S02 602515 MVSI 075/3800-S02 602862 MVSI 075/4200-S02
602826 MVSI 075/5300-S02 602827 MVSI 075/6500-S90 602551 MVSI 075/6800-S02 602870 MVSI 075/10000-S02
602863 MVSI 075/12000-S90 602871 MVSI 075/14000-S02 602872 MVSI 075/17000-S02 602873 MVSI 075/22000-S90
602535 MVSI 075/26000-S90 602589 MVSI 075/30000-S02 6025 MVSI 075/150-S02
600384 CDX 3/300 – G/D 600385 CDX 3/500 – G/D
600387 CDX 3/800 – G/D 600389 CDX 3/1100- G/D
600437 CDX 3/1500- G/D 600317 CDX 3/2100- G/D
600320 CDX 3/2300- G/D 600323 CDX 3/3200- G/D
600486 CDX 3/4700- G/D
601409 CDX 15/200- G/D 601410 CDX 15/400- G/D
601411 CDX 15/550- G/D 601412 CDX 15/700- G/D
601413 CDX 15/1100- G/D 601424 CDX 15/1410- G/D
601328 CDX 15/1710- G/D 601358 CDX 15/2000- G/D
601329 CDX 15/2410- G/D 601330 CDX 15/3810- G/D
601487 CDX 15/5010- G/D
602315 CDX 10/40- G/D 602316 CDX 10/100- G/D
602317 CDX 10/200- G/D 602318 CDX 10/310- G/D
602320 CDX 10/550- G/D 602325 CDX 10/810- G/D
602274 CDX 10/1110- G/D 602277 CDX 10/1610- G/D
602280 CDX 10/2610- G/D 602365 CDX 10/3810- G/D
602201 CDX 10/22000- G/D
602576 CDX 075/150- G/D 602577 CDX 075/250- G/D
602578 CDX 075/400- G/D 602581 CDX 075/660- G/D
602552 CDX 075/910- G/D 602555 CDX 075/1310- G/D
602558 CDX 075/2110- G/D 602602 CDX 075/3110- G/D
602513 CDX 075/22000- G
VBB-326-W VBB-546-W VBB-1076-W VBB-20156-W VBB-32246-W VBB-4
VBB-314-W VBB-534-W VBB-1054-W VBB-1684-W VBB-20114-W VBB
VB-50308-W VB-75558-W VB-100758-W VB-135908-WA VB-1601108-W
VB-112-W VB-322-W VB-552-W VB-1082-WA VB-10102-W VB-20182-W
VB-314-W
VB-534-W vibratory motor
VB-634-W
VB-1054-WA
VB-1264-W
VB-1584-W
VB-20114-W
VB-32154-W
VB-50234-W
VB-75374-W
VB-80554-W
VB-84554-W
VB-100634-W
VB-145894-W
VBB series flameproof vibration motor is the use of the company’s successful technology VB Series vibration motor, flameproof and foreign advanced technology, the technology explosion and vibration technology, designed specifically for oilfield solids control equipment and design products, protective shell rating of IP55, insulation class F, Ex logo ExdⅡBT4, places for class ⅱ T4 group flammable gas or vapor and air to form an explosive mixture in the oil field <a
VBB series flameproof vibration motor, power 0.2 ~ 13KW, 2,4,6,8 very exciting force is 3 ~ 180KN, a total of 25 specifications.