China brand drilling rig parts list
1500HP SCR 50HZ Drilling rig
ITEM DESCRIPTION MODEL UNIT QTY
1 DRAWWORKS AND ACCESSORIES (API SPEC 7)
1.1 1500HP DRAWWORKS JC50D SET 1
1.2 DRAWWORKS DC MOTOR, 800KW SET 2
1.3 PRIMARY BRAKE SYSTEM: HYDRAULIC DISC BRAKE SET 1
1.4 AUXILIARY BRAKE :WATER COOLING EDDY CURRENT BRAKE SET 1
1.5 DRILLER CABIN SET 1
1.6 AUTOMATIC DRILLER SET 1
1.7 DRAWWORKS CONTROL CONSOLE SET 1
1.8 INDEPENDENT 40M3 BRAKE WATER TANK FC-40 SET 1
2 MAST AND ACCESSORIES(API SPEC 4F)
2.1 MAST JJ315/44.5-K SET 1
2.2 CROWN BLOCK (API SPEC 8A) TC315 SET 1
2.3 MONKEY BOARD C/W FINGER BOARD SET 1
2.4 CASING STABBING BOARD SET 1
2.5 DEADLINE ANCHOR SET 1
2.6 BUFFER DEVICE SET 1
2.7 ESCAPE DEVICE AND ANTI-FALLING DEVICE SET 1
2.8 AIR WINCH 0.5 TON SET 1
3 SUBSTRUCTURE AND ACCESSORIES(API SPEC 4F)
3.1 SUBSTRUCTURE DZ315/9-X SET 1
3.2 DOG HOUSE SET 1
3.3 CATWALK & PIPE RACK SET 1
3.4 BOP HANDLING SYSTEM, 50MT SET 1
3.5 HYDRAULIC CATHEAD SET 2
3.6 AIR WINCH 5 TON SET 3
3.7 HYDRAULIC ELEVATOR, 3,300LBS (1.5MT) SET 1
3.8 STAIRWAY, V-DOOR, HANDRAIL, RAT/MOUSE HOLE AND CABLE TRAYS, SET 1
3.9 HYDRAULIC BUFFER RAM SET 1
4 TRAVELING AND ROTARY EQUIPMENTS (API SPEC 8A)
4.1 TRAVELING BLOCK YC315 SET 1
4.2 HOOK DG315 SET 1
4.3 SWIVEL (API SPEC 8A) SL450 SET 1
4.4 ROTARY TABLE SYSTEM SET 1
4.4.1 ROTARY TABLE, OPENING 37-1/2″ ZP375 SET 1
4.4.2 ROTARY TABLE DRIVE DEVICE SET 1
4.4.3 ROTARY TABLE DC MOTOR, 1070HP (800KW) SET 1
4.4.4 MASTER BUSHING C/W INSET BOWLS NO.1,2 AND 3 SET 1
4.4.5 KELLY BUSHING ROLLER 3-1/2″, 5-1/4″ SET 1
4.4.6 CASING BUSHING FOR 20″CASING. SET 1
4.5 ELEVATOR LINK
4.5.1 DH-450 PAIR 1
4.5.2 DH-315 PAIR 1
4.6 DRILLING LINE, 1-1/2″X4000FT (38MM X 1200M) SET 1
4.7 DRILLING LINE SPOOLER SET 1
5 MUD PUMP AND H-PRESSURE CIRCULATING SYSTEM
5.1 TRIPLEX SINGLE ACTING MUD PUMP, 1600 HP,5000PSI F-1600 SET 2
5.1.1 MUD PUMP DC MOTOR, 1070HP (800KW) SET 4
5.1.2 BELT DRIVING SYSTEM, C/W SHEAVE, BELT & COVER SET 2
5.1.3 CHARGING PUMP, 6X8X75HP, C/W MOTOR SB6X8-13″ SET 2
5.1.4 SUCTION MANIFOLD SET 2
5.1.5 DISCHARGE MANIFOLD SET 2
5.1.6 MASTER SKID & AC MOTOR SKID SET 2
5.1.7 ACCESSORIES, C/W SHEARING TYPE RELIEF VALVE, PULSATION DAMPENER, PRESSURE GUAGE,JIB CRANE, WASHING PUMP, LIGHTING SET 2
5,2 MUD HP MANIFOLD, HP PIPE LINE AND DUAL STANDPIPE SET 1
5.2.1 ROTARY HOSE (API SPEC 7K) 3 1/2” 5000PI SET 2
6 POWER PLANT, CONTROL SYSTEM AND ELECTRICITY SUPPLY
6.1 DIESEL GENERATORS,1757HP, 1310KW, 1900KVA, 50HZ, 1500RPM CAT 3512B + SR4B SET 3
6.2 DIESEL ENGINE GENERATORS HOUSE SET 3
6.3 AUX. DIESEL GENERATOR. 320KW, 400V, 60HZ, 400KVA, 1500RPM CAT C15 SET 1
6.4 AUX. DIESEL GENERATOR HOUSE SET 1
6.5 AIR COMPRESSOR,DRYER, AND AIR RECEIVER TANK SET 1
6.5.1 SULLAIR AIR COMPRESSOR LS12-50HH SET 2
6.5.2 SULLAIR DRYER SRC240 SET 1
6.5.3 AIR RESERVOIR:2.5M3 (LOCATED IN AUX.ENGINE HOUSE) C-2.5/1.0 SET 1
6.5.4 AIR RESERVOIR:4M3 (LOCATED ON SUBSTRUCTURE) C-4/1.3 SET 1
6.5.5 COLD STARTING AIR COMPRESSOR SET 1
6.5.6 ACCESSORIES SET 1
7 POWER CONTROL SYSTEM & LIGHTING SYSTEM
7.1 POWER CONTROL SYSTEM(SCR/MCC) SET 1
7.2 RIG LIGHTING AND ELECTRICAL SUPPLY SYSTEM SET 1
8 MUD L-PRESSURE CIRCULATING AND SOLID CONTROL EQUIPMENTS SET 1
8.1 MUD TANKS, 2000BBL TOTAL CAPACITY ZJ50D SET 5
8.2 SOLID CONTROL EQUIPMENTS
8.2.1 SHALE SHAKER SET 2
8.2.2 MUD CLEANER, C/W DESNADER AND DESILTER SET 1
8.2.3 CENTRIFUGE SET 1
8.2.4 DESANDER & DESILTER PUMPS, 75HP (55KW) SET 2
8.2.5 VACUUM DEGASSER SET 1
8.2.6 MIXING PUMP, 75HP (55KW) SET 2
8.2.7 TRIP TANK PUMP, 20HP (15KW) SET 2
8.2.8 AGITATOR, 15HP (11KW) SET 15
8.2.9 MUD GUNS, 3″ SET 9
8.2.10 POOR-BOY DEGASSER SET 1
8.2.11 PIPE WORK, STAIRWAY, WALK WAY, HANDRAIL AND OTHER ACCESSORIES SET 1
9 TANK AREA
9.1 3000BBL CYLINDER FUEL TANK, C/W 30BBL DAILY TANK SET 1
9.2 450BBL CYLINDER FUEL TANK SET 1
9.3 500BBL WATER TANK SET 2
10 BOP SYSTEM
10.1 13.5/8″ 10,000PSI DOUBLE RAM BOP, CAMERON U TYPE WITH STANDARD BONNET BOLTS MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A.
– TOP CONNECTION: FLANGED 13.5/8″ 10,000PSI WP BX-159
– BOTTOM CONNECTION: FLANGED 13.5/8″ 10,000PSI WP BX-159
– STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS AND ALL SIDE OUTLETS.
– SIDE OUTLETS: QTY 4 STUDDED 4.1/16″ 10,000PSI WP
– TEMPERATURE CLASS:T-20
– RAM SUB ASSEMBLY:
UPPER: 5″TO 3-1/2″ VBR.
LOWER: BLIND RAM 13-5/8″10,000 PSI DOUBLE RAM BOP SET 1
10.2 9 5/8” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP SET 1
10.3 5-1/2” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP SET 1
10.4 7” PIPE RAM ASSEMBLY FOR 135/8″ X 10,000PSI RAM BOP SET 1
10.5 13-5/8″10,000 PSI SINGLE RAM BOP, CAMERON U TYPE WITH STANDARD BONNET BOLTS MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A.
– TOP CONNECTION: FLANGED 13-5/8″10,000 PSI WP BX-159
– BOTTOM CONNECTION: FLANGED 13-5/8″10,000 PSI WP BX-159
– STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS AND ALL SIDE OUTLETS.
– SIDE OUTLETS: QTY 2 STUDDED 3.1/16″ X 10,000PSI WP
– TEMPERATURE CLASS:T-20
– RAM SUB ASSY, 5″ PIPE RAM 13-5/8″10,000 PSI SINGLE RAM BOP SET 1
10.6 2 7/8” PIPE RAM ASSEMBLY FOR 13 5/8″ X 10,000PSI RAM BOP SET 1
10.7 3-1/2” PIPE RAM ASSEMBLY FOR 13 5/8″ X 10,000PSI RAM BOP SET 1
10.8 13 5/8″ X 5,000PSI ANNULAR BOP, SHAFFER TYPE MANUFACTURED IN ACCORDANCE WITH API SPECIFICATION 16A. THIRD EDITION, JUNE 2004 AND NACE MR0175 PER API SPECIFICATION 16A. TOP CONNECTION: STUDDED 135/8″ X 5,000PSI WP BX-160, BOTTOM CONNECTION: FLANGED 135/8″ X 10,000PSI WP BX-159, STAINLESS STEEL LAY: TOP AND BOTTOM CONNECTIONS, TEMPERATURE CLASS:T-20 13 5/8″ X 5,000PSI ANNULAR BOP SET 1
10.9 CHOKE MANIFOLD, 31/16” X 10,000PSI, EE, PSL3, PR1, U, CONSIST OF:
ONE EA SKID;
TWO EA FLANGE SPOOL, 3 1/16″ 10000PSI FLANGE END, 508MM LENGTH;
TWO EA FLANGE SPOOL, 3 1/16″ 10000PSI FLANGE END, 1349MM LENGTH;
THREE STUDDED CROSS, 4 X 3 1/16″ 10000PSI;
ONE EA STUDDED CROSS (5 WAY), 4 X 3 1/16″ X 2 1/16″ 10000PSI;
ONE EA GATE VALVE 2 1/16″ 10000PSI FLANGE END;
ONE EA ADJUSTABLE CHOKE VALVE, 3 1/16″ 10000PSI FLANGE END, HYDRAULIC OPERATED;
ONE EA ADJUSTABLE CHOKE VALVE 3/16″ 10000PSI FLANGE END, MANUAL OPERATED;
ELEVEN EA GATE VALVE, 3 1/16″ 10000PSI FLANGE END. CHOKE MANIFOLD, 31/16” X 10,000PSI SET 1
10.10 CONTROL PANEL FOR CHOKE MANIFOLD, SET 1
10.11 CHOKE LINE, 31/16” X 10,000PSI FLANGED END CONNECT, 3M LENGTH SET 2
10.12 KILL MANIFOLD, 31/16” X 10,000PSI, EE, PSL3, PR1, U, CONSIST OF:
ONE EA SKID;
ONE EA SKID;
ONE EA NEEDLE VALVE, 1/2″ NPT FEMALE X MALE THREAD CONNECTION;
ONE EA PRESSURE GAUGE, 0-10000PSI, 4 1/2″ FACE;
ONE EA ADAPTER FLANGE WITH 3″ 1502 FEMALE UNION;
ONE EA STUDDED CROSS (5 WAY), 4 X 3 1/16″ X 2 1/16″ 10000PSI;
ONE EA CHECK VALVE 3 1/16″ 10000PSI FLANGE END;
ONE EA GATE VALVE 2 1/16″ 10000PSI FLANGE END;
TWO EA GATE VALVE 3 1/16″ 10000PSI FLANGE END. KILL MANIFOLD, 31/16” X 10,000PSI SET 1
10.13 KILL LINE, 31/16” X 10,000PSI FLANGED END CONNECT, 3M LENGTH SET 2
10.14 BOP HYDRAULIC CLOSING UNIT, MODEL IS FKQ640-6
BOP CONTROL UNIT WITH AIR ACTUATED ACCUMULATOR SYSTEM, 3,000 PSI WP, CONSISTING OF :
– SIXTEEN (16) ACCUMULATOR BOTTLES (LOW-TEMPERATURE), WITH VOLUME 40L EACH, WITH 2″ PORTS, COMPLETE WITH ISOLATION VALVES ON EACH BOTTLE ;
– CONTROLLED OBJECTS: SIX (6)
– ONE (1) 3/4″ X 3300 PSI RELIEF VALVE ;
– ONE (1) 1″ BYPASS VALVE (TO GO FROM MANIFOLD PRESSURE TO ACCUMULATOR PRESSURE QUICK);
– ONE (1) TRIPLEX PLUNGER PUMP, COMPLETE WITH EXPLOSION-PROOF E/MOTOR;
– ONE (2) REMOTE CONTROL PANEL C/W 150FT CONTROL HOSES – DRILLER’S PANEL
– TWO (2) EXTERNAL ACCUMULATOR MANIFOLDS;
– HYDRAULIC CLOSING UNIT MOUNTED ON HEAVY-DUTY SKIDS. BOP HYDRAULIC CLOSING UNIT FKQ640-6 SET 1
10.15 20′ LONG SUITCASE WITH 12 EACH 3000 PSI I” STEEL HYDRAULIC LINES TO CONNECT ACCUMULATOR UNIT TO BOPS ONE, (1 ) EACH 2″ AIR LINE WITH FIG 200 UNION, C/W UNIVERSAL JOINT, HAMMER UNION SET 3
10.16 36 EACH 3M LONG 1″AMOURED HOSE 3000PSI JT 36
10.17 12 EACH 10M LONG 1″ AMOURED HOSE, 3000 PSI JT 12
10.18 DRILLING SPOOL, 13 5/8″ 10,000PSI BX-159 FLANGED TOP X 13 5/8″ 10,000PSI BX-159 FLANGED BOTTOM, WITH 2 EACH 31/16” X 10,000PSI FLANGED OUTLETS DRILLING SPOOL, 13 5/8″ 10,000PSI EA 1
10.19 31/16” X 10,000PSI GATE VALVE, MANUAL OPERATION
31/16” X 10,000PSI GATE VALVE, HYDRAULIC OPERATION SET 1
10.20 31/16” X 10,000PSI GATE VALVE, MANUAL OPERATION
31/16” X 10,000PSI GATE VALVE, HYDRAULIC OPERATION
31/16” X 10,000PSI CKECK VALVE SET 1
10.21 HIGH PRESSURE TEST PUMP UNIT, PNEUMATICALLY OPERATED MINIMUM 20,000PSI WORKING PRESSURE, EQUIPPED WITH CHART RECORDER, PRESSURE HOSES HIGH PRESSURE TEST PUMP UNIT SET 1
10.22 TEST STUMP FOR 13-5/8″ 10,000PSI BOP WITH 5″ IF FEMALE THREAD SET 1
10.23 TEST STUMP FOR 21-1/4″ 2,000PSI BOP WITH 5″ IF FEMALE THREAD SET 1
10.24 DROP IN VALVES
DROP IN CHECK VALVES: 5000PSI DROP IN VALVE FOR 5″ D.P(OD 6-1/2″,CONN.4-1/2IF BOX&PIN) SET 1
11 DRILLING INSTRUMENTATION
11.1 INCLUDING SENSORS, DISPLAY SYSTEM, DATA ACQUISITION SYSTEM, RECORDING SYSTEM, MOUNTING ACCESSORIES, HYDRAULIC HOSE, CABLES AND FITTINGS, KITS ZCJY SET 1
12 TOP DRIVE
12.1 TOP DRIVE, 700,000LBS (350TON) DQ-50LHTY1 SET 1
13 SAFETY EQUIPMENTS
13.1 H2S DETECTOR SYSTEM
13.1.1 MSA TWO CHANNEL CONTROLLER UNITE MODEL 9020 WITH LCD 4~20MA & RELAY OUTLET，ONE 9020 CAN BE CONNECTED WITH TWO DETECTORS MSA 9020 EA 4
13.1.2 MSA MODEL 9020-10 WALL CONTROL CABINET,ONE CABINET CAN SET 5 9020 CONTROL UNITES MSA 9020-10 EA 1
13.1.3 MSA MODEL ULTIMA-XE-H2S TOXIC GAS DETECTOR(EXP) WITH LCD DISPLAY ,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT MSA ULTIMA-XE-H2S EA 4
13.1.4 MSA MODEL ULTIMA-XE-LEL COMBUSTIBLE GAS DETECTOR(EXP) WITH LCD DISPLAY,RANGE IN 0~50PPM,AND WITH 4-20MA OUTPUT,ULTIMA-XE-H2S MSA ULLTIMA-XE-LEL EA 4
13.1.5 DIGITIAL POWER FOR ALARMER,5A@24VDC,AND BE SET IN CONTROL CABINET DIGITIAL POPWER 24 VDC EA 1
13.1.6 3 LINE SHIELD CABLE RPPV3X1.5 CABLE3X1.5 M 1200
13.1.7 CALIBRATION KITS FOR 10PPM H2S ,INLUDING CALIBRATION GAS BOTTLE AND FLOW VALVE CALIBRATION KIT SET 1
13.1.8 ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) ALARMER(RED LAMP) SET 1
13.1.9 ALARMER(AUDIO & LAMP,YELLOW LAMP,EXP MODEL,WITH 50 CABLE LINE) ALARMER(YELLOW LAMP) SET 1
13.1.10 MSA MADULE PORTABLE INSTRUMENT MODEL ORION PLUS EX-O2-SO2-H2S-CO2,WITH GAS PUMP MSA PORTABLE INSTRUMENT SET 2
13.1.11 MSA PORTABLE INSTRUMENT MODEL ALTAIR-PRO FOR H2S MSA ALTAIR-PRO SET 4
13.1.12 MSA PORTABLE INSTRUMENT MODEL ALTAIR PRO FOR SO2 MSA ALTAIR-PRO SET 2
13.1.13 CALIBRATION GAS CALIBRATON GAS SET 2
13.1.14 FLOW VALVE 0.25L/MIN SET 2
13.1.15 ONE AIR PURITY TESTING KIT. MSA9920243 SET 1
13.1.16 CHARGE PUMP
100L/MIN
MOTOR: 2..2KW, 400V 3 PHASES
GRP COOLING MSA100EFI SET 1
13.1.17 SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE, MINIMUM 30 MINUTES, CYLINDER PRESSURE 200 BAR, WITH CASE. MSA SET 8
13.1.18 EMERGENCY ESCAPE SETS, SELF CONTAINED, OPEN CIRCUIT, POSITIVE PRESSURE 5 MINUTES, CYLINDER PRESSURE 200 BAR, HANSEN FITTING FOR CONNECTION TO AIR LINE SYSTEM. MSA9920005-1 SET 6
13.1.19 PORTABLE GASOLINE DRIVEN RECHARGE COMPRESSOR, COMPLETE AND CERTIFIED. 100PFI MSA-9960029 SET 1
13.1.20 MOBILE BOTTLE EA 4
13.2 FIRE SAFETY EQUIPMENTS
13.2.1 FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 50KG WHEELED ABS DRY CHEMICAL, 50KG WHEELED SET 4
13.2.2 FIRE EXTINGUISHER FOR MAIN CAMP
CO2, 5KG CO2, 5KG SET 12
13.2.3 FIRE EXTINGUISHER FOR MAIN CAMP
ABS DRY CHEMICAL, 8KG ABS DRY CHEMICAL, 8KG SET 56
13.2.4 FIRE PUMP SYSTEM SET 2
13.2.5 FIRE HOSE 300M SET 1
13.2.6 FIRE FIGHTING OUTFITS SET 4
13.3 SAFETY BELT SET 6
13.4 OTHER SAFETY EQUIPMENTS SET 1
13.4.1 EYEWASH STATION EA 4
13.4.2 SHOWER STATION SET 2
13.4.3 HEARING PROTECTION PAIR 200
13.4.4 HARD HAT EA 80
13.4.5 SAFETY BOOTS PAIR 80
13.4.6 GLOVE SET 100
13.4.7 FIRST AID BOX SET 2
14 CAMPS
14.1 OFFICE SET 2
14.2 2 MEN ROOM SET 3
14.3 4 MEN BEDROOM SET 4
14.4 8 MEN BEDROOM SET 5
14.5 CLINIC SET 1
14.6 KITCHEN FOR JUNIOR STAFF SET 1
14.7 RECREATION ROOM FOR JUNIOR STAFF SET 1
14.8 KITCHEN FOR SENIOR STAFF SET 1
14.9 RECREATION ROOM FOR SENIOR STAFF SET 1
14.10 LAUNDRY SET 1
14.11 DRY STORES SET 1
14.12 FREEZER/REEFER SET 1
14.13 PRAYING ROOM SET 1
14.14 ABLUTIONS (SINKS , SHOWERS ,TOILETS) SET 1
14.15 PORTABLE WATER TANK SET 1
14.16 FUEL TANK SET 1
14.17 DIESEL GENERATOR. 320KW, 400V, 60HZ, 400KVA, 1500RPM CAT C15 SET 2
14.18 DIESEL GENERATOR HOUSE SET 1
15 TUBULAR
15.1 DRILL PIPE
15.1.1 DRILL PIPE 5″ FRICTION WELDED
-WEIGHT: 19.5 PPF
-GRADE: G-105
-WALL THICKNESS: 0.362″
-TOOL JOINT OD: 6 5/8″
-TOOL JOINT ID: 3 1/4″
-UPSET TYPE: IEU
-PIN TONG SPACE: 7”
-BOX TONG SPACE: 10″ +3″ HARDBANDING
-TAPER SHOULDER: 18 DEGREE
-CONNECTION: NC50(4 1/2″ IF)
-LENGTH RANGE: R2
-WITH ARNCO-100XT HARDBANDING AND TK34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION DRILL PIPE 5″ G-105 M 4000
15.1.2 DRILL PIPE 3 1/2″ FRICTION WELDED
-WEIGHT: 13.3 PPF
-GRADE: G-105
-WALL THICKNESS: 0.368″
-TOOL JOINT OD: 5″
-TOOL JOINT ID: 2 7/16″
-UPSET TYPE: EU
-PIN TONG SPACE: 8″
-BOX TONG SPACE: 10 1/2″ + 3” HARDBANDING
-TAPER SHOULDER: 18°
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH RANGE: R2 (9.45M-9.75M)
-WITH ARNCO-100XT HARDBANDING AND TX34 INTERNAL COATING
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-DESIGNED ACCORDING TO API 5D AND SPEC 7, LAST EDITION DRILL PIPE 3 1/2″ G-105 M 2500
15.2 HWDP
15.2.1 5″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-CENTER UPSETS OD: 5 1/2″, CENTER UPSETS ENDS: 5 1/8″
-CENTER UPSET LENGTH: 24″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CONNECTION: NC50 (4 1/2″ IF)
-TOOL JOINT OD: 6 1/2″, ID: 3″
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS. HWDP 5” JT 50
15.2.2 3 1/2″ HEAVY WEIGHT DRILL PIPE, INTEGRAL TYPE,
-MATERIAL: 4145 ALLOY STEEL
-OVERRALL LENGTH: 31 FEET
-WEIGHT: 25.3 LBS/FT
-CENTER UPSETS OD: 4″, CENTER UPSETS ENDS: 3 5/8″
-WITH API BORE BACK ON BOX END, WITH API STRESS RELIEF GROOVE ON PIN
-CENTER UPSET LENGTH: 24″
-TOOL JOINT OD: 4 3/4″, ID: 2 1/16″
-CONNECTION: NC38 (3 1/2″ IF)
-TOOL JOINT PIN END LENGTH: 27″ MIN
-TOOL JOINT BOX END LENGTH: 21″ MIN
-WITH ARNCO-100XT HARD BANDING, CENTERAL PART 3″ -WIDTH, PIN AND END 4″ WIDTH
-WITH PRESS STEEL PROTECTORS ON BOTH ENDS HWDP 3-1/2” JT 15
15.3 DRILL COLLAR
15.3.1 9-1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 3″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION:7-5/8 REG
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK 9-1/2″ SPIRAL DRILL COLLAR JT 15
15.3.2 8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: 6 5/8″ REG
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK 8″ SPIRAL DRILL COLLAR JT 24
15.3.3 6 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 30 FEET
-BORE SIZE 2 13/16″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 50 (4 1/2″ IF)
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK 6 1/2″ SPIRAL DRILL COLLAR JT 30
15.3.4 4 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 1/4″
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC38
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
-PIN CONNECTIONS WITH A STRESS RELIEF GROOVE AND BOX CONNECTIONS WITH A BORE BACK 4 3/4″ SPIRAL DRILL COLLAR JT 18
15.4 DRILL PIPE PUP JOINT
15.4.1 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 5 FT JT 1
15.4.2 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 10 FT JT 1
15.4.3 5″ OD DRILL PIPE PUP JOINTS - G105, 19.5 LBS/FT – 15 FT JT 1
15.4.4 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 5 FT JT 1
15.4.5 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 10 FT JT 1
15.4.6 3 1/2″ OD DRILL PIPE PUP JOINTS - G105, 13.3 LBS/FT – 15 FT JT 1
15.5 CROSSOVER SUB
15.5.1 6 5/8 REG BOX X 7-5/8 REG PIN OVERALL LENGTH 36″ EA 2
15.5.2 4-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ EA 2
15.5.3 3-1/2 IF BOX X 6-5/8 REG PIN OVERALL LENGTH 36″ EA 2
15.5.4 3-1/2 IF BOX X 4-1/2 IF PIN OVERALL LENGTH 36″ EA 2
15.5.5 4-1/2 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ EA 2
15.5.6 2-7/8 IF BOX X 3-1/2 IF PIN OVERALL LENGTH 36″ EA 2
15.5.7 3-1/2 IF BOX X 2-7/8 IF PIN OVERALL LENGTH 36″ EA 2
15.6 BIT SUB
15.6.1 9 1/2″ O.D X 3″ I.D BIT SUB 6 5/8″ REG BFF BOX X 7 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 5F-6R EA 2
15.6.2 8 1/2″ O.D X 3″ I.D BIT SUB 6 5/8″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 5F-6R EA 2
15.6.3 8 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 6 5/8″ REG BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R EA 2
15.6.4 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R EA 2
15.6.5 6 1/2″ O.D X 1 3/4″ I.D BIT SUB 3 1/2″ REG BFF BOX X 4 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 2F-3R EA 2
15.6.6 6 1/2″ O.D X 2 13/16″ I.D BIT SUB 4 1/2″ REG BFF BOX X 3 1/2″ IF BOX OAL MIN 48″ W/C BORED FOR FLOAT VALVE & FLOAT VALVE 4R EA 2
15.7 KELLY
15.7.1 5 1/4“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 6 3/8″
-CONNECTION: NC50( 4 1/2″ IF)
-BORE SIZE 3 1/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J 5 1/4“ HEX KELLY EA 1
15.7.2 3-1/2“ HEX KELLY, FRICTION WELDED TYPE
-MATERIAL: 4145H ALLOY STEEL
-OVERALL LENGTH: 40 FEET
-DRIVEN LENGTH: 37 FEET
-TOP UPSET JOINT OD: 7 3/4″;
-LH CONNECTION: 6 5/8″ REG
-BOTTOM UPSET OD: 4-1/8″
-CONNECTION: NC31( 2 7/8″ IF)
-BORE SIZE 1 3/4″
-THREAD PHOSPHATED C/W PRESS STEEL PROTECTORS
-WITH STEEL PACKAGE
-HARDNESS 285-341 HB
-CHARPY IMPACT≥ 54J 3-1/2“ HEX KELLY EA 1
15.8 KELLY COCK, KELLY SAVER SUB & SAFETY VALVES
15.8.1 UPPER KELLY COCK,10000PSI W.P. WITH 6-5/8 REG LH CONN. UPPER KELLY COCK EA 2
15.8.2 LOWER KELLY COCK,10000PSI W.P. WITH 4-1/2IF CONN. LOWER KELLY COCK EA 2
15.8.3 LOWER KELLY COCK,10000PSI W.P. WITH 2-7/8IF CONN. EA 2
15.8.4 KELLY SAVER SUB OD 6-3/8″ CONNECTION 4-1/2 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR KELLY SAVER SUB EA 2
15.8.5 KELLY SAVER SUB OD 4-1/8″ CONNECTION 2-7/8 IF
C/W RUBBER DRILL PIPE CASING PROTECTOR EA 2
15.8.6 FULL OPENING SAFETY VALVE 10,000PSI WP
–FOR 5″ DRILL PIPE WITH 4-1/2IF CONN. SAFETY VALVE EA 1
15.8.7 FULL OPENING SAFETY VALVE
10,000PSI WP
-FOR 3-1/2″ DRILL PIPE WITH 3-1/2 IF CONN. EA 1
16 DRILLING TOOLS
16.1 ELEVATORS
16.1.1 CASING SLIP TYPE ELEVATOR/SPIDER, 350 TON 4-1/2″ TO 13 /3/8″ AIR OPERATED OPERATED, VARCO STYLE
2 EA BODY ASSEMBLY COMPLETE, WITH AIR SUPLLY HOSE ASSEMBLIES AIR OPERATED ,
1 EA CASING GUIDE BELL ASSEMBLY
1 EA SPIDER ADAPTER PLATE 27-1/2″
1 SET 5″INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 5 1/2″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 5 1/2″
2 SET SLIP ASSEMBLY5 1/2″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 7″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 7″
2 SET SLIP ASSEMBLY 7″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY.FOR 9-5/8″
1 EA ELEVATOR GUIDE PLATE ASSY. FOR 9-5/8″
2 SET SLIP ASSEMBLY 9-5/8″ WITH INSERTS
1 EA SPIDER GUIDE PLATE ASSY. FOR 13-3/8″
1 EA ELEVATOR GUIDE PLATE ASSY.FOR 13-3/8″
2 SET SLIP ASSEMBLY 13-3/8″ WITH INSERTS SET 2
16.1.2 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 20″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.3 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 13-3/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.4 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-5/8″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.5 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 7″ CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.6 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5 1/2″” CASING, MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.7 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 5″ CASING(LINER), MODEL SLX, SIDE DOOR TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.8 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 9-1/2″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.9 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 8-1/4″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.10 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 6-1/2″ DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 150TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.11 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 4-3/4″DRILL COLLAR, MODEL TA, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.12 ELEVATORS (COMPLETE) FOR 90DEG SHOULDER 3-1/2″ DRILL COLLAR, MODEL TA100, CENTER LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.13 ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.14 ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 5″ DRILL PIPE, MODEL GG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 350TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.15 ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 3-1/2″ DRILL PIPE, MODEL MGG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 250TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.16 ELEVATORS (COMPLETE) FOR 18DEG TAPERED SHOULDER 2-3/8″ DRILL PIPE, MODEL MG (DDZ), CENTRE LATCH TYPE, RATED CAPACITY 100TONS, MANUFACTED TO API 8A STANDARD. SET 2
16.1.17 ELEVATORS (COMPLETE) FOR 20″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD SET 1
16.1.18 ELEVATORS (COMPLETE) FOR 13-3/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD SET 1
16.1.19 ELEVATORS (COMPLETE) FOR 9-5/8″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD SET 1
16.1.20 ELEVATORS (COMPLETE) FOR 7″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 5TONS, MANUFACTED TO API 8A STANDARD SET 1
16.1.21 ELEVATORS (COMPLETE) FOR 5-1/2″ CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 7A STANDARD SET 1
16.1.22 ELEVATORS (COMPLETE) FOR 5″CASING, MODEL SJ, SINGLE JOINT CENTRE LATCH TYPE, RATED CAPACITY 4TONS, MANUFACTED TO API 8A STANDARD SET 1
16.2 POWER TONG
16.2.1 ZQ127/25Y POWER TONG
PIPE SIZE RANGE OF MASTER TONG 2 3/8″-5 1/2″
HIGH GEAR RATED TORQUE 5100 N.m
LOW GEAR RATED TORQUE 25000 N.m
HIGH GEAR RATED SPEED ≤65 R/MIN
LOW GEAR RATED SPEED ≤10 R/MIN
RATED OPERATION PRESSURE 16MPa
MAX.FLOW 32 GPM
PNEUMATIC OPERATION PRESSURE 0.5-0.9 MPa SIZE 12507801000
WEIGHT (INCLUDING BACKUP TONG) 730KG SET 1
16.2.2 TQ340-35Y POWER CASING TONG
SIZE RANGE:4 1/2″-13 3/8″
MAX PRESSURE: 3045 PSI
WORKING FLOW: 29.3- 45.4 GPM
HIGH GEAR TORQUE: 2950-4130 FT.LBF
LOW GEAR TORQUE: 19175-25960 FT.LBF
HIGH GEAR SPEED: 57-95 RPM
LOW GEAR SPEED: 9-15. RPM
SIZE: 62.2″ X 35.4″ X 33.9″
WEIGHT: 1670 LB SET 1
16.2.3 TQ508-70Y POWER CASING TONG
SIZE RANGE: 9 5/8″-20″(245-508mm)
MAX PRESSURE: 3045 PSI
WORKING FLOW: 35 GPM
HIGH GEAR TORQUE: 7000FT.LBS
LOW GEAR TORQUE: 50000 FT.LBS
HIGH GEAR SPEED: 23 RPM
LOW GEAR SPEED: 3. RPM
SIZE: 81″ X 48″ X 27″(2050X1220X690MM)
WEIGHT: 3200LB(1450KG) SET 1
16.3 BIT BREAKER
16.3.1 BIT BREAKER FOR 26” EA 1
16.3.2 BIT BREAKER FOR 17 1/2” EA 1
16.3.3 BIT BREAKER FOR 12-1/4” EA 1
16.3.4 BIT BREAKER FOR 8-1/2” EA 1
16.3.5 BIT BREAKER FOR 6” EA 1
16.4 SLIPS
16.4.1 SLIPS (COMPLETE) FOR 20″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5329 ,MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.2 SLIPS (COMPLETE) FOR 13.3/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5313, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.3 SLIPS (COMPLETE) FOR 9.5/8″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5307, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.4 SLIPS (COMPLETE) FOR 7″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, PART NUMBER 5301, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.5 SLIPS (COMPLETE) FOR 5.1/2″ CASING, MODEL CMS-XL, BUTTON TYPE DIES, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.6 SLIPS (COMPLETE) FOR 9-1/2″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 8-1/2″ TO 10″), BUTTON TYPE DIES, PART NUMBER 2530, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.7 SLIPS (COMPLETE) FOR 8.1/4″ DRILL COLLAR, MODEL DCS-L (SIZE RANGE 6.3/4″ TO8.1/4″), BUTTON TYPE DIES, PART NUMBER 2503, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.8 SLIPS (COMPLETE) FOR 6-1/2″ DRILL COLLAR, MODEL DCS-R (SIZE RANGE 5-1/2″ TO 7″), BUTTON TYPE DIES, PART NUMBER 2550, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.9 SLIPS (COMPLETE) FOR 4 3/4″DRILL COLLAR, MODEL DCS-R (SIZE RANGE 4-1/2″ TO 6″), BUTTON TYPE DIES, PART NUMBER 2552 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.10 SLIPS (COMPLETE) FOR 3 1/5″DRILL COLLAR, MODEL DCS-S (SIZE RANGE 3″ TO 4″), BUTTON TYPE DIES, PART NUMBER 2572, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 1
16.4.11 SLIPS (COMPLETE) FOR 5″ DRILL PIPE, SLIP BODY SIZE 5-1/2″, MODEL SDXL, PART NUMBER 15520, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 2
16.4.12 SLIPS (COMPLETE) FOR 3.1/2″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15522, MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 2
16.4.13 SLIPS (COMPLETE) FOR 2.7/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15523 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 2
16.4.14 SLIPS (COMPLETE) FOR 2.3/8″ DRILL PIPE, SLIP BODY SIZE 3.1/2″, MODEL SDML, PART NUMBER 15524 , MANUFACTED TO API STANDARD FOR USE IN API STANDARD INSERT BOWLS. EA 2
16.5 SAFETY CLAMP
16.5.1 SAFETY CLAMP FOR 9-1/2″ TO 10-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD SET 1
16.5.2 SAFETY CLAMP FOR 8-1/2″ TO 9-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD SET 1
16.5.3 SAFETY CLAMP FOR 6-1/2″ TO 7-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD SET 1
16.5.4 SAFETY CLAMP FOR 4-1/2″ TO 5-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD SET 1
16.5.5 SAFETY CLAMP FOR 3-1/2″ TO 4-5/8″ TUBULARS, MODEL WA-C, MANUFACTURED TO API STANDARD SET 1
16.6 MANUAL TONG
16.6.1 1 SET (2 EACH) MANUAL TONG FOR 2-3/8″ TO 3-1/2″ DRILLING AND CASING TUBULARS, MODEL HT35-C WITH LUG JAWS FOR FULL SIZE, MAXIMUM RATED CAPACITY 35,000FTLBS SET 1
16.6.2 1 SET (2 EACH) MANUAL TONG FOR 3 1/2″ TO 13 3//8″ DRILLING AND CASING TUBULARS, MODEL B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 55,000FTLBS SET 1
16.6.3 1 SET (2 EACH) MANUAL TONG FOR 13-3/8″ TO 20″ DRILLING AND CASING TUBULARS, MODEL HT25 -B WITH LUG JAWS FOR FULL RANGE, MAXIMUM RATED CAPACITY 25,000FTLBS SET 1
16.7 STABILIZERS
16.7.1 26″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X PIN CONN. EA 2
16.7.2 17-1/2″ HOLE INTEGRAL BLADE NEAR BIT STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X BOX CONN. EA 2
16.7.3 17-1/2″ HOLE INTEGRAL BLADE STRING TYPE STABILIZER W/9-1/2″ FISHING NECK 7-5/8 REG BOX X PIN CONN. EA 4
16.7.4 12-1/4″ HOLE INTEGRAL BLAND NEAR BIT TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X BOX CONN EA 2
16.7.5 12-1/4″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/8″ FISHING NECK 6-5/8REG BOX X PIN CONN EA 4
16.7.6 8-1/2″ HOLE INTEGRAL BLAND NEAR TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOXUP X 4-1/2 REG BOX DOWN CONN EA 2
16.7.7 8-1/2″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/6-1/2″ OD FISHING NECK 4-1/2 IF BOX X PIN CONN EA 4
16.7.8 6″ HOLE INTEGRAL BLAND NEAR BIT STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX UP X 3-1/2 REG BOX DOWN CONN. EA 2
16.7.9 6″ HOLE INTEGRAL BLAND STRING TYPE STABILIZER W/4-3/4″ FISHING NECK 3-1/2 IF BOX X PIN CONN. EA 4
16.8 CASING THREAD PROTECTORS
16.8.1 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 20″ CASING EA 3
16.8.2 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 13-3/8″ CASING EA 3
16.8.3 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 9-5/8″ CASING EA 3
16.8.4 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 7″ CASING EA 3
16.8.5 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5-1/2″ CASING EA 3
16.8.6 QUICK RELEASE CASING THREAD PROTECTORS CLAMP-ON FOR 5″ CASING EA 3
17 FISHING TOOLS
17.1 OVERSHOT
17.1.1 OVERSHOT 11-1/4″ SERIES 150 FS OVERSHOT 11-1/4″ EA 1
11-1/4″ X 36 EXTENSION EA 1
11-1/4″ X 15″ OVERSIZE GUIDE EA 1
11-1/4″ X 42″ STANDARD WALL HOOK EA 1
SPIRAL GRAPPLE 9-1/2″, 9″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 2X1 SET EA 2
BASKET GRAPPLE 8″, 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER SET 1
17.1.2 OVERSHOT 9-5/8″ SERIES 150 FS OVERSHOT 9-5/8″ EA 1
9-5/8″ X 36 EXTENSION EA 1
9-5/8″ X 15″ OVERSIZE GUIDE EA 1
9-5/8″ X 42″ STANDARD WALL HOOK EA 1
SPIRAL GRAPPLE 8″ C/W SPIRAL GRAPPLE CONTROL PACKER EA 1
BASKET GRAPPLE 6-5/8″,6-1/2″,5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER SET 1
17.1.3 OVERSHOT 8-1/8″ SERIES 150 FS OVERSHOT 8-1/8″ EA 1
8-1/8″ X 42″ LONG EXTENSION EA 1
8-1/8″ X 15″ OVERSIZE GUIDE EA 1
8-1/8″ X 11″ OVERSIZE GUIDE EA 1
8-1/8″ X 42″ STANDARD WALL HOOK EA 1
SPIRAL GRAPPLE 6-1/2″ C/W SPIRAL GRAPPLE CONTROL PACKER,TOTAL 1 X1 SET EA 1
BASKET GRAPPLE 5″, 4-3/4″,4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER SET 1
17.1.4 OVERSHOT 5-3/4″ SERIES 150 SFS OVERSHOT 5-3/4″ EA 1
SPIRAL GRAPPLE 4 3/4″ C/W SPIRAL GRAPPLE CONTROL PACKER EA 1
BASKET GRAPPLE 4-1/8″, 3-1/2″ C/W MILL CONTROL PACKER SET 1
17.1.5 OVERSHOT 3-5/8″ SERIES 150 SFS OVERSHOT 3-5/8″ EA 1
3-5/8″ X 36 EXTENSION EA 1
SPIRAL GRAPPLE 2-7/8″ C/W SPIRAL GRAPPLE CONTROL PACKER EA 1
17.2 FISHING JARS
17.2.1 7-3/4″ HYDRAULIC FISHING JARS
OD 197 MM, ID 71 MM, OVERALL LENGTH (PULLED) 4430 MM
STROKE 330 MM,TENSILE LOAD 1870 KN,
TENSILE DOWNHOLE MAX 2200 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 6-5/8 REG 7-3/4″ HYDRAULIC FISHING JARS EA 1
17.2.2 6-1/4″ HYDRAULIC FISHING JARS
OD 159 MM, ID 57 MM, OVERALL LENGTH (PULLED) 4410 MM
STROKE 320 MM,TENSILE LOAD 12700 KN,
TENSILE DOWNHOLE MAX 700 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 4-1/2 IF 6-1/4″ HYDRAULIC FISHING JARS EA 1
17.2.3 4-3/4″ HYDRAULIC FISHING JARS
OD 121 MM, ID 45 MM, OVERALL LENGTH (PULLED) 4065 MM
STROKE 305 MM,TENSILE LOAD 980 KN,
TENSILE DOWNHOLE MAX 400 KN,SEALING PRESSURE 20 MPA,
HIGHTEST WORKING TEMPERATURE 150℃, CONNECTION 3-1/2 IF 4-3/4″ HYDRAULIC FISHING JARS EA 1
17.2.4 3-3/4″ HYDRAULIC FISHING JARS CONNECTION 2-7/8 REG 3-3/4″ HYDRAULIC FISHING JARS EA 1
17.3 BUMPER SUBS
17.3.1 7-3/4″ BUMPER SUBS
OD 197 MM, ID 70 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1530 KN, WORK STROKE 1500 MM
CONNECTION 6-5/8 REG, CLOSED LENGTH 2740MM 7-3/4″ BUMPER SUBS EA 1
17.3.2 6-1/4″BUMPER SUBS
OD 159 MM, ID 51 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1430 KN, WORK STROKE 1400 MM
CONNECTION 4-1/2 IF, CLOSED LENGTH 2600MM 6-1/4″BUMPER SUBS EA 1
17.3.3 4-3/4″ BUMPER SUBS
OD 121 MM, ID 38 MM, SEALING PRESSURE 20 MPA
TENSILE LOAD MAX 1220 KN, WORK STROKE 1000 MM
CONNECTION 3-1/2 IF, CLOSED LENGTH 2110MM 4-3/4″ BUMPER SUBS EA 1
17.3.4 3-3/4″ BUMPER SUBSCONNECTION 2-7/8REG 3-3/4″ BUMPER SUB EA 1
17.4 SAFETY JOINT
17.4.1 SAFETY JOINT WITH 6-5/8″ REG BOX X PIN EA 1
17.4.2 SAFETY JOINT WITH 4-1/2″IF BOX X PIN EA 1
17.4.3 SAFETY JOINT WITH 3-1/2″IF BOX X PIN EA 1
17.4.4 SAFETY JOINT WITH 2-7/8″IF BOX X PIN EA 1
17.5 REVERSE CIRCULATING JUNK BASKET
17.5.1 15″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 7-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 16″ OD FOR OPERATION INSIDE 17-1/2″ HOSE SIZE 15″ OD REVERSE CIRCULATING JUNK BASKET EA 1
17.5.2 11″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 6-5/8″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL. JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 11-3/4″ OD FOR OPERATION INSIDE 12-1/4″ HOSE SFZE 11″ OD REVERSE CIRCULATING JUNK BASKET EA 1
17.5.3 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WITH 4-1/2″ API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 8-1/4″ OD FOR OPERATION INSIDE 8-1/2″ HOSE SIZE 7-7/8″ OD REVERSE CIRCULATING JUNK BASKET EA 1
17.5.4 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 3-1/2′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 5-5/8″ OD FOR OPERATION INSIDE 6″ HOSE SIZE 5-1/8″ OD REVERSE CIRCULATING JUNK BASKET EA 1
17.5.5 4″ OD REVERSE CIRCULATING JUNK BASKET FURNISHED WILH 2-3/8′” API REG BOX TOP CON INCLUDES LIFT SUB, STEEL BALL, JUNK CATCHER AND TYPE “A” MILL SHOE DRESSED TO 4-1/8″ OD FOR OPERATION INSIDE 5″ LINER 4″ OD REVERSE CIRCULATING JUNK BASKET EA 1
17.6 JUNK SUB
17.6.1 JUNK SUB FOR 17-1/2″ HOLE ,CUP OD 12-7/8″ &I.D. 11-5/8″ , ID 3″ ,7-5/8″ REG. BOX DOWN X 7-5/8″ REG. PIN UP JUNK SUB FOR 17-1/2″ HOLE EA 1
17.6.2 JUNK SUB FOR 12-1/4″ HOLE ,CUP OD 9-5/8″ & I.D. 8-17/32 , ID 2 13/16″ , 6-5/8″ REG. BOX DOWN X 6-5/8″ REG. PIN UP JUNK SUB FOR 12-1/4″ HOLE EA 1
17.6.3 JUNK SUB FOR 8-1/2″ HOLE ,CUP OD 6-5/8″ &I.D.5-15/16, ID 2 1/4″ , 4-1/2″ REG. BOX DWON X 4-1/2″ REG. PIN UP JUNK SUB FOR 8-1/2″ HOLE EA 1
17.6.4 JUNK SUB FOR 6″AND 5-7/8″ HOLE, CUP OD 5″ &I.D. 4-1/16, ID 1 1/2″ , 3-1/2″ REG. BOX DOWN X 3-1/2″ REG. PIN UP JUNK SUB FOR 6″AND 5-7/8″ HOLE EA 1
17.7 FISHING MAGNET
17.7.1 FISHING MAGNET 10 1/2” OD ,WITH 6-5/8” REG BOX CONNECTION.FISHING NECK OD 8” FISHING MAGNET 10 1/2” OD EA 1
17.7.2 FISHING MAGNET 7” OD ,WITH 4-1/2” IF BOX CONNECTION,FISHING NECK OD 6-1/2″ FISHING MAGNET 7” OD EA 1
17.7.3 FISHING MAGNET 5” OD ,WITH 2-7/8” IF BOX CONNECTION,FISHING NECK OD 4-1/8” FISHING MAGNET 5” OD EA 1
17.7.4 FISHING MAGNET 4” OD ,WITH 2-3/8″IF BOX CONNECTION,FISHING NECK OD 3-3/8” FISHING MAGNET 4” OD EA 1
17.8 JUNK MILL
17.8.1 JUNK MILL OF 12″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 6-5/8″ REG. BOX UP,FISHING OD 8-1/2″ JUNK MILL OF 12″ O.D. EA 1
17.8.2 JUNK MILL OF 8-1/2″ O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 4-1/2″ IF. BOX UP,FISHING OD 6-1/2″ JUNK MILL OF 8-1/2″ O.D. EA 1
17.8.3 JUNK MILL OF 5 3/4″, O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES. WITH 3-1/2″ IF. BOX UP ,FISHING OD 4-3/4″ JUNK MILL OF 5 3/4″, O.D. EA 1
17.8.4 JUNK MILL OF 4.1/2” O.D. DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES.WITH 2-3/8″ IF. BOX UP,FISHING OD 3-3/8″ JUNK MILL OF 4.1/2” O.D. EA 1
18 MISCELLANEOUS SET 1
18.1 RIG SITE MONITORING SYSTEM SET 1
18.2 HYDRAULIC POWER UNIT SET 1
18.3 HYDRAULIC WIRE ROPE CUTTER SET 1
18.4 RIG ASSEMBLY AND RIG-UP TOOL SET 1
18.4.1 DERRICK MAN’S SAFETY BELTS SET 1
18.4.2 TOOLS AND ACCESSORIES FOR ASSEMBLY SET 1
18.4.3 SLING LINE FOR ASSEMBLY AND LIFTING SET 1
18.4.4 HYDRALIC JACK 50MT SET 2
18.4.5 MECHANICAL JACK 16MT SET 2
18.4.6 MOVABLE GREASE DEVICE SET 1
18.4.7 TELESCOPING STAIRWAY 12M SET 1