9-1/2”
SPIRIAL DRILL COLLAR 9 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 3″
-WEIGHT: 217LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: 7 5/8″ REG
-BEVEL DIAMETER: 8 13/16″+1/64″
-BENDING STRENGTH RATIO: 2.81:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
9”
SPIRIAL DRILL COLLAR 9″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 195LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC61 (7 5/8″ REG)
-BEVEL DIAMETER: 8 3/8″+1/64″
-BENDING STRENGTH RATIO: 3.17:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
8 1/4”
SPIRAL
DRILL COLLAR 8 1/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 161LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: 6 5/8″ REG
-BEVEL DIAMETER: 7 45/64″+1/64″
-BENDING STRENGTH RATIO: 2.93:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
8”
SPIRAL
DRILL COLLAR 8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 150LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 56 (6 5/8″ REG)
-BEVEL DIAMETER: 7 31/64″+1/64″
-BENDING STRENGTH RATIO: 3.02:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
7 3/4”
SPIRAL
DRILL COLLAR 7 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 139LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 56 (6 5/8″ REG)
-BEVEL DIAMETER: 7 19/64″+1/64″
-BENDING STRENGTH RATIO: 2.70:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
7”
SPIRAL
DRILL COLLAR 7″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 110LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 50 (4 1/2″ IF)
-BEVEL DIAMETER: 6 31/64″+1/64″
-BENDING STRENGTH RATIO: 2.73:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
6 3/4″
SPIRAL
DRILL COLLAR 6 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 1/4″
-WEIGHT: 108LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 46 (4″ IF)
-BEVEL DIAMETER: 6 9/32″+1/64″
-BENDING STRENGTH RATIO: 3.18:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
6 1/2″
SPIRAL DRILL COLLAR 6 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 13/16″
-WEIGHT: 92LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 50 (4 1/2″ IF)
-BEVEL DIAMETER: 6 3/32″+1/64″
-BENDING STRENGTH RATIO: 3.05:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
6 1/4″
SPIRAL
DRILL COLLAR 6 1/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2 1/4″
-WEIGHT: 90LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 46 (4″ IF)
-BEVEL DIAMETER: 5 7/8″+1/64″
-BENDING STRENGTH RATIO: 2.91:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
4 3/4″
SPIRAL DRILL COLLAR 4 3/4″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2″
-WEIGHT: 50LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 35 OR NC38
-BEVEL DIAMETER: 4 33/64″+1/64″
-BENDING STRENGTH RATIO: 2.58:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
4 1/8″
SPIRAL
DRILL COLLAR 4 1/8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 2″
-WEIGHT: 35LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 38 (3 1/2″ IF)
-BEVEL DIAMETER: 3 61/64″+1/64″
-BENDING STRENGTH RATIO: 2.43:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
3 1/2″
SPIRAL
DRILL COLLAR 3 1/2″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 1 1/2″
-WEIGHT: 27LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 31 (2 7/8″ IF)
-BEVEL DIAMETER: 3 17/64″+1/64″
-BENDING STRENGTH RATIO: 2.42:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
3 1/8″
SPIRAL
DRILL COLLAR 3 1/8″ SPIRAL DRILL COLLAR
-MATERIAL: 4145H ALLOY STEEL
-LENGTH: 31 FEET
-BORE SIZE 1 1/4″
-WEIGHT: 22LB/FT
-C/W SLIP AND ELEVATOR RECESS
-CONNECTION: NC 23
-BEVEL DIAMETER: 3″+1/64″
-BENDING STRENGTH RATIO: 2.57:1
-THREAD PHOSPHATED AND COLD ROLLED
-WITH PRESS STEEL PROTECTORS ON PIN AND BOX
BIT SUBS
7-5/8″ REG BOX x 7-5/8″ REG BOX, 36” LENGTH
7-5/8″ REG BOX x 6-5/8″ REG BOX, 36” LENGTH
6-5/8″ REG BOX x 6-5/8″ REG BOX, 36” LENGTH
6-5/8″ REG BOX x 4-1/2″ REG BOX, 36” LENGTH
4″ IF BOX x 4-1/2″ REG BOX, 36” LENGTH
4″ IF BOX x 3-1/2″ REG BOX, 36” LENGTH
3-1/2″ IF BOX x 3-1/2″ REG BOX, 36” LENGTH
CROSS OVER SUBS
7-5/8″ REG BOX x 6-5/8″ REG PIN, 36” LENGTH
6-5/8″ REG BOX x 7-5/8″ REG PIN, 36” LENGTH
6-5/8″ REG BOX x 4-1/2″ IF PIN, 36” LENGTH
4″IF BOX x 6-5/8″ REG PIN, 36” LENGTH
4-1/2″IF BOX x 6-5/8″ REG PIN, 36” LENGTH
3-1/2″IF BOX x 4″IF PIN, 36” LENGTH
3-1/2″IF BOX x 3-1/2″IF PIN, 36” LENGTH
KELLY SAVER SUBS
KELLY SAVER SUB WITH SUFFICIENT&PROPER SIZED CASING PROTECTOR ELEMENTS FOR 5-1/4″ KELLY WITH 4-1/2″ IF PIN X BOX CONNECTION
KELLY SAVER SUB WITH SUFFICIENT&PROPER SIZED CASING PROTECTOR ELEMENTS FOR 4-1/4″ KELLY WITH 3-1/2″ IF PIN X BOX CONNECTION
MUD SAVER SUBS
MUD SAVER SUB FOR 4-1/4″ KELLY, OD=121, NC38 BOX x PIN
MUD SAVER SUB FOR 5-1/4″ Kelly, OD=168, 4-1/2 IF BOX x PIN
LIFTING PLUG
LIFTING PLUG 7-5/8 REG, PIN DOWN WITH LIFTING BAIL
LIFTING PLUG 6-5/8 REG, PIN DOWN WITH LIFTING BAIL
LIFTING PLUG 4-1/2 IF, PIN DOWN WITH LIFTING BAIL
LIFTING PLUG 3-1/2 IF, PIN DOWN WITH LIFTING BAIL
BIT BREAKERS
BIT BREAKERS FOR 26” BITS.
BIT BREAKERS FOR 17 ½” BITS.
BIT BREAKERS FOR 12 ¼” BITS.
BIT BREAKERS FOR 8 ½” BITS.
BIT BREAKERS FOR 6” BITS.
BIT BREAKERS FOR 5-7/8” BITS.
LIFTING SUBS
LIFTING SUB FOR 9-1/2″DC
LIFTING SUB FOR 8-1/4″ DC
LIFTING SUB FOR 6-1/2″DC
LIFTING SUB FOR 4-3/4″DC
KELLY COCK
UPPER KELLY COCK , 8” – 7-3/4” OD X 3” – 3-1/16” ID , 10K W.P WITH 6-5/8” REG. L.H BOX X PIN. CONN.
LOWER KELLY COCK ,6-3/8” OD X 2-3/4”- 2-13/16” ID , 10K W.P WITH 4-1/2” IF BOX X PIN CONN.
LOWER KELLY COCK , 4-3/4” OD X 2-1/4” ID – 1-3/4”, 10K W.P WITH 3-1/2” IF BOX X PIN CONN.
SAFETY VALVE
SAFETY VALVE, FULL OPEN FOR 5″DP, 5000 PSI , 4-1/2″IF CONN.
SAFETY VALVE, FULL OPEN FOR3 1/2″DP, 5000 PSI, 3-1/2″IF CONN.
FLOAT VALVE
7-5/8REG FLOAT VALVE FOR 9-1/2” DRILL COLLAR
6-5/8REG FLOAT VALVE FOR 8-1/4” DRILL COLLAR
NC46 FLOAT VALVE FOR 6-1/2” DRILL COLLAR
NC38 FLOAT VALVE FOR 4-3/4” DRILL COLLAR
DROP-IN VALVE
RETRIEVABLE DROP-IN CHECK VALVES FOR 5” DRILL PIPE, 4 ½” IF CONNECTION
RETRIEVABLE DROP-IN CHECK VALVES FOR 3 ½” DRILL PIPES, 3 ½” IF CONNECTION
INSIDE BOP
INSIDE BOP WITH 4-1/2 IF 5000PSI FOR 5″DP
INSIDE BOP WITH 3-1/2 IF 5000PSI FOR 3 1/3″DP
CIRCULATING HEADS
CIRCULATING HEAD FOR 5” 4-1/2IF DRILL PIPE WITHOUT QUICK OPENING GATE VALVE AND 2” WECO CONNECTION.
CIRCULATING HEAD FOR 3-1/2” 3-1/2IF DRILL PIPE WITHOUT QUICK OPENING GATE VALVE AND 2” WECO CONNECTION.
CIRCULATING HEAD FOR 20” CASING WITHOUT API BTC CONNECTIONS FITTED WITH QUICK OPENING GATE VALVE AND CHIKSON HOSE CONNECTION.
CIRCULATING HEAD FOR 13-3/8” CASING WITHOUT API BTC CONNECTIONS FITTED WITH QUICK OPENING GATE VALVE AND CHIKSON HOSE CONNECTION.
CIRCULATING HEAD FOR 9-5/8” CASING WITHOUT API BTC CONNECTIONS FITTED WITH QUICK OPENING GATE VALVE AND CHIKSON HOSE CONNECTION.
CIRCULATING HEAD FOR 7” CASING WITHOUT API BTC CONNECTIONS FITTED WITH QUICK OPENING GATE VALVE AND CHIKSON HOSE CONNECTION.
CIRCULATING HEAD FOR 5-1/2” CASING WITHOUT API BTC CONNECTIONS FITTED WITH QUICK OPENING GATE VALVE AND CHIKSON HOSE CONNECTION.
OVERSHOTS
LT-T286 11 1/4″ OVERSHOT FOR 17 1/2″ HOLE OR 12 1/4″ HOLE
9 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
9 3/8″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
8 1/4″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
8 1/8″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
8″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
LT-T200 7 7/8″ OVERSHOT FOR 10 3/4″ HOLE OR 8 1/2″ HOLE
6 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
6 3/8″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
6 1/4″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
4 3/4″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
4 1/2″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
4 3/8″ BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
LT-T143 5 5/8” OVERSHOT FOR 6” HOLE
4 3/4” SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
4 1/2” SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
4 3/8” BASKET GRAPPLE AND MILL CONTROL PACKER AND O-RING
LT-T286 11 1/4″ OVERSHOT FOR 17 1/2″ HOLE OR 12 1/4″ HOLE
ONE LOT OF ALL THE REQUIRED GRAPPLES (BOTH BASKET AND SPIRAL) WITH GRAPPLE CONTROLS, MILL CONTROL PACKERS, LOCK RING, BREAK OUT CLAMPS AND PACKERS TO SUITE 10”, 8” DRILL COLLARS, DRILL COLLARS AND OTHER TUBULAR IN ABOVE HOLE SIZES.
15″ OD OVERSIZED GUIDE (240) TO OPERATE INSIDE 17-1/7″ HOLE SIZE(240) SERIES 150 OVERSHOT
11-1/4″ OD EXTENSION SUB ,36″ LONG(265) F/ SERIES” 150″ OVERSHOT
11-1/4″ OD WALHOOK GUIDE 42″ LONG(240)
LT-T245 9-5/8″ CIRCULATING OVERSHOT
9-5/8″ OD EXTENSION SUB ,36″ LONG(265) F/ SERIES” 150″ OVERSHOT
9-5/8″OD X 15″ OD OVERSIZED GUIDE (240) TO OPERATE INSIDE 17-1/7″ HOLE SIZE(240) SERIES 150 OVERSHOT
9 5/8″ OD WALHOOK GUIDE 42″ LONG(240)
LT-T200 7 7/8″ OVERSHOT FOR 10 3/4″ HOLE OR 8 1/2″ HOLE
6 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
6 3/8″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
6 1/4″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL
4 3/4″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING
4 1/2″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING
4 3/8″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING
11″ OD OVERSIZED GUIDE (240) TO OPERATE INSIDE 17-1/7″ HOLE SIZE(240) SERIES 150 OVERSHOT
7-7/8″ OD EXTENSION SUB ,36″ LONG(265) F/ SERIES” 150″ OVERSHOT
146 5-3/4″ CIRCULATING OVERSHOT
5-3/4″ OD EXTENSION SUB ,24″ LONG(265) F/ SERIES” 150″ OVERSHOT
105 4-1/8″ CIRCULATING OVERSHOT
4-1/8″ OD EXTENSION SUB ,24″ LONG(265) F/ SERIES” 150″ OVERSHOT
4″ OD WALHOOK GUIDE 36″ LONG(240)
Fishing tools
TAPER TAPS （
FISNING OD(45-67), NC38
FISNING OD(55-61), NC38
FISNING OD(88-103), NC38
FISNING OD(88-103, NC50
FISNING OD(108-112), NC50
DIE COLLARS （打捞母锥）
FISNING OD(86-108), NC38
FISNING OD(95-118), NC38
FISNING OD(110-135), NC50
FISNING OD 114, 4 1/2″IF
FISNING OD(108 168 , 6 5/8″REG
SPEAR （打捞矛）
10 3/4″ SPEAR TO CATCH 9 1/2″ DC
8 5/8″ SPEAR TO CATCH 8 1/8″ DC
7″ SPEAR TO CATCH 6 1/2″ DC
5 1/2″ SPEAR TO CATCH 4 3/4″ DC
SPEAR FOR 2-3/8″ TUBING
SPEAR FOR 2-7/8″ TUBING
SPEAR FOR 5-1/2 CASING
SPEAR FOR 7″ CASING
SPEAR FOR 9-5/8″ CASING
SPEAR FOR 13-3/8″ CASING
FISHING MAGNET （
CL292 FISHING MAGNET FOR 12-1/4″ HOLE
CL203 FISHING MAGNET FOR 8-1/2″ HOLE
CL128 MAGNETS FOR 5-3/4” SIZE HOLE
REVERSE CIRCULATION JUNK BASKET （反循环强磁打捞篮）
LL130 REVERSE CIRCULATION JUNK BASKET, 13″
LL106 REVERSE CIRCULATION JUNK BASKET, 10 3/4″
LL81 REVERSE CIRCULATION JUNK BASKET, 8-1/8″
LL77 REVERSE CIRCULATION JUNK BASKET, 7 7/8″
LL51 REVERSE CIRCULATION JUNK BASKET, 5 1/8″
JUNK SUBS
SLB245-4-00 JUNK SUB FOR 12 1/4″ HOLE
SLB168-3-00 JUNK SUB FOR 8 1/2″ HOLE
JUNK SUB FOR 5 3/4″ HOLE
JUNK MILL(MILL SHOES) （磨鞋）-磨铣工具MILLING TOOLS
PMX290 JUNK MILL, FLAT BOTTOM TYPE FOR 12-1/4” HOLE
PMX203A JUNK MILL, FLAT BOTTOM TYPE FOR 8-1/2” HOLE
JUNK MILL, FLAT BOTTOM TYPE FOR 5-3/4” HOLE
WASHOVER SHOESMILLING TOOLS
WASHOVER SHOES FOR 10-3/4″ OD WASHER OVER PIPE
WASHOVER SHOES FOR 7-5/8″ OD WASHER OVER PIPE
SAFETY JOINT INCIDENT HANDLING TOOLS
AJ 8″ CONNECTION
AJ 6-1/2″ CONNECTION
AJ 4-1/4″ CONNECTION
IMPRESSION BLOCK INCIDENT HANDLING TOOLS
IMPRESSION BLOCK FOR 12-1/4” HOLE
IMPRESSION BLOCK FOR 8-1/2” HOLE