LB94 108～117.5 Junk sub 2 3/8REG 19 94
LB102 117.5～124 Junk sub 2 7/8REG 32 102
LB114 130～149 Junk sub 3 1/2REG 38 114
LB127 152.4～162 Junk sub 3 1/2REG 38 127
LB140 165～190.5 Junk sub 3 1/2REG 38 140
LB168 190.5～216 Junk sub 4 1/2REG 57 168
LB178 219～244.5 Junk sub 4 1/2REG 57 178
LB190 229～273 Junk sub 4 1/2REG 57 190
LB197 235～279.5 Junk sub 5 1/2REG 70 197
LB219 244～295 Junk sub 6 5/8REG 89 219
LB229 254～305 Junk sub 6 5/8REG 89 229
LB245 292～330 Junk sub 6 5/8REG 89 245
LB280 330～375 Junk sub 7 5/8REG 89 280
LB311 327～375 Junk sub 7 5/8REG
LB327 375～444.5 Junk sub 7 5/8REG 102 327
LB340 386～456 Junk sub 7 5/8REG
JUNK SUB TIANHE
Bit breaker 17-1/2″
Bit breaker 12-1/4″
Bit breaker 10-5/8″
Bit breaker 9-7/8″
Bit breaker 8-1/2″
Bit breaker 7-5/8″
Bit breaker 6-3/4″
Bit breaker 6-1/8″
Bit breaker 6″
Bit breakers are used for Rock Bit
CSJ90 9 ” SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ80II 8″ SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ76II 7-3/4″ SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ165 6 1/2″ SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ62II 6 1/4″ SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ46II 4 3/4″ SUPER FISHING JAR TYPE CSJ FISHING JAR
CSJ44 4 1/2″ SUPER FISHING JAR TYPE CSJ FISHING JAR
DRILL PIPE CIRCULATION HEAD
NO. DESCRIPTION d1 D2 BTC PIN
1 NC40 (OR NC50) B X 20 BTC P 415 508 20 BTC
2 NC40 (OR NC50) B X 13-3/8 BTC P 275 334 13-3/8 BTC
3 NC40 (OR NC50) B X 9 5/8 BTC P 190 244.5 9-5/8 BTC
4 NC40 (OR NC50) B X 8 5/8 STC P 170 219.1 8 5/8 STC
5 NC40 (OR NC50) B X 7 5/8 BTC P 140 193.7 7 5/8 BTC
6 NC40 (OR NC50) B X 7 BTC P 130 178 7 BTC
7 NC40 B X 5 ½ LTC P 57.2 139.7 5 ½ LTC
ITEM CONN. A PIN D d L
8 NC 40 4 ½ BTC 139.7 57.2 762
9 NC 40 2-7/8 EUE 139.7 57.2 762
10 NC 50 5 ½ BTC 165.1 57.2 762
11 NC 50 4 ½ BTC 165.1 57.2 762
12 NC 50 2-7/8 EUE 165.1 57.2 762
CIRCULATION HEAD NC40 B X 16 BTC P (OD1 5-1/2” X OD2 16 ”,ID 2-13/16”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 13 3/8 BTC P (OD1 5-1/2” X OD2 13-3/8 ”,ID 2-13/16”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 9 5/8 BTC P (OD1 5-1/2” X OD2 9-5/8 ”,ID 2-13/16”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 7 BTC P (OD1 5-1/2” X OD2 7 ”,ID 2-13/16”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 5 1/2 BTC P (OD 5-1/2”,ID 2-1/4”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 5 1/2 BTC P (OD1 5-1/2” X OD2 4-1/8”,ID 2”,LENGTH 30”)
CIRCULATION HEAD NC40 B X 2 7/8 IF P (OD1 5-1/2” X OD2 4-1/2 ”,ID 2-1/4”,LENGTH 30”)
CIRCULATION HEAD 2” w /integral 1502 X 13 3/8 BTC P (OD 13-3/8”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X 9 5/8 BTC P (OD 9-5/8”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X 5 1/2 BTC P (OD 5-1/2”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X 2 7/8 IF P (OD 4-1/8”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X 7 BTC P (OD 7”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X 20 BTC P (OD 20”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 XNC38 P (OD 4-3/4”,ID 1-3/4”,LENGTH 20”)
CIRCULATION HEAD 2” w /integral 1502 X NC50 P (OD 6-1/2”,ID 1-3/4”,LENGTH 20”)
JAR INTENSIFIER
YJQ90 9 ” JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ80 8 ” JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ76 7-3/4 ” JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ165 6 1/2″ JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ62 6 1/4″ JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ46II 4 3/4″ JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
YJQ44 4 1/2″ JAR INTENSIFIER TYPE YJQ JAR INTENSIFIER
KXJ90 9 ” BUMPER SUB TYPE KXJ BUMPER SUB
KXJ80 8 ” BUMPER SUB TYPE KXJ BUMPER SUB
KXJ76 7-3/4 ” BUMPER SUB TYPE KXJ BUMPER SUB
KXJ165 6 1/2″ BUMPER SUB TYPE KXJ BUMPER SUB
KXJ62 6 1/4″ BUMPER SUB TYPE KXJ BUMPER SUB
KXJ46 4 3/4″ BUMPER SUB TYPE KXJ BUMPER SUB
KXJ44 4-1/2″ BUMPER SUB TYPE KXJ BUMPER SUB
KXJ33 3-3/4″ BUMPER SUB TYPE KXJ BUMPER SUB
LUBRICATED BUMPER SUB
BXJ73 2-7/8″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ95 3-3/4″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ44 4-1/2″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ46 4-3/4″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ62 6-1/4″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ76 7-3/4″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
BXJ80 8″ LUBRICATED BUMPER SUB LUBRICATED BUMPER SUB
LT-T286 11 1/4″ OVERSHOT FOR 17 1/2″ HOLE OR 12 1/4″ HOLE OVERSHOT
9 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
9 3/8″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
8 1/4″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
8 1/8″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
8″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
LT-T200 7 7/8″ OVERSHOT FOR 10 3/4″ HOLE OR 8 1/2″ HOLE OVERSHOT
6 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
6 3/8″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
6 1/4″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
4 3/4″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
4 1/2″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
4 3/8″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
LT-T143 5 5/8″ OVERSHOT FOR 6″ HOLE OVERSHOT
4 3/4″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
4 1/2″ SPIRAL GRAPPLE AND PACKING AND SPIRAL CONTROL OVERSHOT
4 3/8″ BASKET GRAPPLE AND MILL CONTROL PAKER AND O-RING OVERSHOT
LT-T350 13-3/4″ CIRCULATING OVERSHOT OVERSHOT
LT-T340 13-3/8″ CIRCULATING OVERSHOT OVERSHOT
LT-T298 11-3/4″ CIRCULATING OVERSHOT OVERSHOT
LT-T286 11-1/4″ CIRCULATING OVERSHOT OVERSHOT
LT-T270 10-5/8″ CIRCULATING OVERSHOT OVERSHOT
LT-T245 9-5/8″ CIRCULATING OVERSHOT OVERSHOT
9-5/8″ OD EXTENSION SUB ,36″ LONG(265) F/ SERIES” 150″ OVERSHOT OVERSHOT
9-5/8″OD X 15″ OD OVERSIZED GUIDE (240) TO OPERATE INSIDE 17-1/7″ HOLE SIZE(240) SERIES 150 OVERSHOT OVERSHOT
9 5/8″ OD WALHOOK GUIDE 42″ LONG(240) OVERSHOT
LT-T219 8-5/8″ CIRCULATING OVERSHOT OVERSHOT
LT-T206 8-1/8″ CIRCULATING OVERSHOT OVERSHOT
8 1/8″ OD EXTENSION SUB 42″LONG OVERSHOT
8 1/8″ OD X 15 “OD OVERSIZED GUIDE FOR OPERATION INSIDE 17 1/2” HOLE SIZE OVERSHOT
8 1/8″ OD X 11 “OD OVERSIZED GUIDE FOR OPERATION INSIDE 12 1/4” HOLE SIZE OVERSHOT
8 1/8″ OD WALHOOK GUIDE 42″ LONG OVERSHOT
LT-T187 7-3/8″ CIRCULATING OVERSHOT OVERSHOT
LT-T168 6-5/8″ CIRCULATING OVERSHOT OVERSHOT
LT-T143 5-5/8″ CIRCULATING OVERSHOT OVERSHOT
CL140 FISHING MAGNET FOR 6″ HOLE FISHING MAGMENT
CL203 FISHING MAGNET FOR 8 1/2″ HOLE FISHING MAGMENT
CL245 FISHING MAGNET FOR 10 3/4″ HOLE FISHING MAGMENT
CL292 FISHING MAGNET FOR 12 1/4″ HOLE FISHING MAGMENT
CL406 FISHING MAGNET 16″ X 7-5/8″ REG PIN UP FISHING MAGMENT
CL292 FISHING MAGNET 11-1/2″ X 6-5/8″ REG PIN UP FISHING MAGMENT
CL184 FISHING MAGNET 7-1/4″ X 4-1/2″ REG PIN UP FISHING MAGMENT
CL127 FISHING MAGNET 5″ X 3-1/2″ REG PIN UP FISHING MAGMENT
CL89 3-1/2″ FISHING MAGNET FISHING MAGMENT
CL178 7″ FISHING MAGNET FISHING MAGMENT
CL216 8-1-2″ FISHING MAGNET FISHING MAGMENT
CL340 13-3/8″ FISHING MAGNET FISHING MAGMENT
WH660-69 26″ STRING STABILIZER,SLEEVE CHANGEABLE, STABLIZER
WH660-69D 26″ NEAR BIT STABILIZER ,SLEEVE CHANGEABLE STABLIZER
WL444-49 17 1/2″ STRING STABILIZER TYPE WL,9 ” OD OF MANDREL STABLIZER
WL444-49D 17 1/2″ NEAR BIT STABILIZER TYPE WL,9″ OD OF MANDREL STABLIZER
WL311-48 12 1/4″ STRING STABILIZER TYPE WL, 8 1/4″ OD OF MANDREL STABLIZER
WL311-48D 12 1/4″ NEAR BIT STABILIZER TYPE WL,8 1/4″ OD OF MANDREL STABLIZER
WL214-56 8 1/2″ STRING STABILIZER TYPE WL,6 1/4″ OD OF MANDREL STABLIZER
WL214-56D 8 1/2″ NEAR BIT STABILIZER TYPE WL,6 1/4″ OD OF MANDREL STABLIZER
WL152-54 6″ STRING STABILIZER TYPE WL, 4 3/4″ OD OF MANDREL STABLIZER
WL152-54D 6″ NEAR BIT STABILIZER TYPE WL,4 3/4″ OD OF MANDREL STABLIZER
KFQ311 12 1/8″ – 11 1/4″ ADJUSTABLE STABILIZER STABLIZER
JUNK SUBS/FISHING CUP
LB327S JUNK SUBS FOR 17 1/2″ HOLE JUNK SUB
LB280S JUNK SUBS FOR 12 1/4″ HOLE JUNK SUB
LB190S JUNK SUBS FOR 8 1/2″ HOLE JUNK SUB
LB140S JUNK SUBS FOR 6″ HOLE JUNK SUB
JUNK SUB FOR 9-1/2″ DRILL COLLAR STRING 7-5/8″ REG PIN UP 7-5/8″ REG BOX DOWN JUNK SUB
JUNK SUB FOR 8-1/4″ DRILL COLLAR STRING 6-5/8″ REG PIN UP 6-5/8″ REG BOX DOWN JUNK SUB
JUNK SUB FOR 6-3/4″ DRILL COLLAR STRING 4-1/2″ REG PIN UP 4-1/2″ REG BOX DOWN JUNK SUB
JUNK SUB FOR 4-3/4″ DRILL COLLAR STRING 3-1/2″ REG PIN UP 3-1/2″ REG BOX DOWN JUNK SUB
LB127S FISHING CUP FISHING CUP
LB168S FISHING CUP FISHING CUP
LB178S FISHING CUP FISHING CUP
LB273S FISHING CUP FISHING CUP
LB340S FISHING CUP FISHING CUP
REVERSE CIRCULATION JUNK BASKET
LL36 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL51 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL77 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL81 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL106 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL130 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
LL150 REVERSE CIRCULATION JUNK BASKET JUNK BASKET
Type
Hole Size
MillShoe O.D
Fish Max.O.D
Ball Dia
Thread Conn
LL-381 406-444 386 282 55 7 5/8REG
LL-318 349-406 324 248 50 6 5/8REG
LL-F286 320-346 298 217 55 6 5/8REG
LL-F279 298-317 286 211 55 6 5/8REG
LL-F254 273-295 260 195 55 6 5/8REG
LL-F245 273-295 252 192 50 NC50
LL-F232 250-270 239 179 50 NC50
LL-F206 220-241 210 159 45 NC50
LL-F195 212-241 202 149 42 NC50
LL-F178 198-209 184 130 42 NC50
LL-F168 190-209 174 123 42 NC50
LL-F130 155-165 136 94 40 NC31
LL-F121 142-152 126 90 35 NC31
LL-F114 130-140 121 82 35 NC31
LL-F97 117-127 103 62 30 NC26
LL-F89 108-114 94 55 30 NC26
“F “TYPE FLOAT VALVES
1R FLOAT VALVE
1F-2R FLOAT VALVE
2F-3R FLOAT VALVE
3F FLOAT VALVE
3-1/2 F FLOAT VALVE
4R FLOAT VALVE
4F FLOAT VALVE
5R FLOAT VALVE
5F-6R FLOAT VALVE
6F FLOAT VALVE
Float Valve size
D in mm L in mm
1R 1.65625 42.06875 5.875 149.225
1F-2R 1.90625 48.41875 6.25 158.75
2F-3R 2.40625 61.11875 6.5 165.1
3F 2.8125 71.4375 10 254
3-1/2 F 3.125 79.375 10 254
4R 3.46875 88.10625 8.3125 211.1375
4F 3.65625 92.86875 12 304.8
5R 3.875 98.425 7.75 196.85
5F-6R 4.78125 121.4438 11.75 298.45
6F 5.6875 144.4625 14.625 371.475
Metal Repair Kit for 2F-3R Float Valve 280
Rubber Repair Kit for 2F-3R Float Valve 80
Metal Repair Kit for 4R Float Valve 290
Rubber Repair Kit for 4R Float Valve 90
Metal Repair Kit for 5F6R Float Valve 300
Rubber Repair Kit for 5F6R Float Valve 90
1 17＂Reamer NEAR BIT
/STRING
7-5/8REG 17＂ 90” 9-1/2” 5-1/2” 12-5/8”
2 16 Reamer NEAR BIT
/STRING
7-5/8REG 16 90” 9-1/2” 5-1/2” 12-5/8”
3 12-1/4＂ Reamer NEAR BIT
/STRING
6-5/8REG 12-1/4＂ 82” 8-1/4” 3-15/16” 11-3/4”
4 12＂Reamer NEAR BIT
/STRING
6-5/8REG 12＂ 82” 8-1/4” 3-15/16” 11-3/4”
5 8-1/2＂ Reamer NEAR BIT 4-1/2 IF BOX UP
4-1/2 REG BOX DOWN
8-1/2＂ 70” 6-1/2” 2-3/4” 7-7/8”
8-1/2＂Reamer STRING 4-1/2 IF BOX UP
4-1/2 IF PIN DOWN
8-1/2＂ 70” 6-1/2” 2-3/4” 7-7/8”
6 8-3/8＂Reamer NEAR BIT 4-1/2 IF BOX UP
4-1/2 REG BOX DOWN
8-3/8＂ 70” 6-1/2” 2-3/4” 7-7/8”
8-3/8＂Reamer STRING 4-1/2 IF BOX UP
4-1/2 IF PIN DOWN
8-3/8＂ 70” 6-1/2” 2-3/4” 7-7/8”
7 6-1/8＂Reamer NEAR BIT 3-1/2 IF BOX UP
3-1/2 REG BOX DOWN
6-1/8＂ 63” 4-3/4” 2” 7-7/8”
6-1/8＂Reamer STRING 3-1/2 IF BOX UP
3-1/2 IF PIN DOWN
6-1/8＂ 63” 4-3/4” 2” 7-7/8”
8 6＂Reamer NEAR BIT 3-1/2 IF BOX UP
3-1/2 REG BOX DOWN
6＂ 63” 4-3/4” 2” 7-7/8”
6＂Reamer STRING 3-1/2 IF BOX UP
3-1/2 IF PIN DOWN
6＂ 63” 4-3/4” 2” 7-7/8”
9 5-7/8＂Reamer NEAR BIT 3-1/2 IF BOX UP
3-1/2 REG BOX DOWN
5-7/8＂ 63” 4-3/4” 2” 7-7/8”
5-7/8＂Reamer STRING 3-1/2 IF BOX UP
3-1/2 IF PIN DOWN
5-7/8＂ 63” 4-3/4” 2” 7-7/8”
10 22” Reamer NEAR BIT 7-5/8REG BOX × PIN 22” 110” 9-1/2” 7” 15-3/4”
22” Reamer STRING 7-5/8REG BOX × PIN 22” 110” 9-1/2” 7” 15-3/4”
11 24” Reamer NEAR BIT 7-5/8REG BOX × PIN 24” 110” 9-1/2” 7” 15-3/4”
24” Reamer STRING 7-5/8REG BOX × PIN 24” 110” 9-1/2” 7” 15-3/4”
12 26” Reamer NEAR BIT 7-5/8REG BOX × PIN 26” 110” 9-1/2” 7” 15-3/4”
26” Reamer STRING 7-5/8REG BOX × PIN 26” 110” 9-1/2” 7” 15-3/4”
13 28” Reamer NEAR BIT 7-5/8REG BOX × PIN 28” 110” 9-1/2” 7” 15-3/4”
28” Reamer STRING 7-5/8REG BOX × PIN 28” 110” 9-1/2” 7” 15-3/4”
L L1 L2 D2 d B SPIRAL ANGLE TYPE
24 24 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 4 36° Near bit
24 24 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 4 36° string
17-1/2 17-1/2 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 3-1/2 27° Near bit
17-1/2 17-1/2 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 3-1/2 27° string
12-1/4 12-1/4 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 3 18° Near bit
12-1/4 12-1/4 6-5/8 REG×6-5/8 REG 120 30 20 8 2-13/16 3 18° string
8-1/2 8-1/2 4-1/2 IF ×4-1/2 REG 84 20 11-3/4 6-1/2 2-13/16 2-1/4 23° Near bit
8-1/2 8-1/2 4-1/2 IF ×4-1/2 IF 84 20 11-3/4 6-1/2 2-13/16 2-1/4 23° string
6-1/4 6-1/4 2-3/ 8 IF ×2-3/8 REG 72 20 11-3/4 4-3/4 2 2-3/16 8 Near bit
6-1/4 6-1/4 2-3/8 IF ×2-3/8 F 72 20 11-3/4 4-3/4 2 2-3/16 8 string
HYQ216 REAMER, 8 1/2″ NEAR BIT FOR 6 11/4″DC REAMER
HYQ216 REAMER, STRING 8 1/2″ F/6 1/4″DC REAMER
HYQ152 REAMER, 6″ NEAR BIT FOR 4 3/4″DC REAMER
HYQ152 REAMER, STRING 6″ F/4 3/4″DC REAMER
HYQ711 REAMER, 28″ NEAR BIT FOR 9 1/2″DC REAMER
HYQ711 REAMER, STRING 28″ F/9 1/2″DC REAMER
HYQ559 REAMER, 22″ NEAR BIT FOR 9 1/2″DC REAMER
HYQ559 REAMER, STRING 22″ F/9 1/2″DC REAMER
HYQ432 REAMER, 17″ NEAR BIT FOR 9 1/2″DC REAMER
HYQ432 REAMER, STRING 17″ F/ 9 1/2″DC REAMER
HYQ406 REAMER, 16″ NEAR BIT FOR 9 1/2″DC REAMER
HYQ406 REAMER, STRING 16″ F/9 1/2″DC REAMER
HYQ305 REAMER, STRING 12″ F/8 1/2″DC REAMER
HYQ305 REAMER, 12″ NEAR BIT FOR 8 1/2″DC REAMER
HYQ311 REAMER, STRING 12 1/4″ F/8 1/2″DC REAMER
HYQ311 REAMER, 12 1/4″ NEAR BIT FOR 8 1/2″DC REAMER
HYQ213 REAMER, STRING 8 3/8″ F/6 1/4″DC REAMER
HYQ213 REAMER, 8 3/8″ NEAR BIT FOR 6 1/4″DC REAMER
HYQ149 REAMER, STRING 5 7/8″ F/4 3/4″DC REAMER
HYQ149 REAMER, 5 7/8″ NEAR BIT FOR 4 3/4″DC REAMER
HYQ155 REAMER, 6 1/8″ NEAR BIT FOR 4 3/4″DC REAMER
HYQ155 REAMER, STRING 6 1/8″ F/ 4 3/4″DC REAMER
X-OVER 7-5/8″ REG PIN X 6-5/8″ REG BOX CROSSOVER SUB
X-OVER 7-5/8″ REG PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 6-5/8″ REG PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 6-5/8″ REG PIN X 4″ REG BOX CROSSOVER SUB
X-OVER 4-1/2″ REG PIN X 4″ REG BOX CROSSOVER SUB
X-OVER 4″ REG PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 3-1/2″ REG PIN X 3-1/2″ REG BOX CROSSOVER SUB
X-OVER 3-1/2″ REG PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 4-1/2″ REG PIN X 6-5/8″ REG BOX CROSSOVER SUB
X-OVER 6-5/8″ REG PIN X 6-5/8″ REG PIN CROSSOVER SUB
X-OVER 4-1/2″ REG PIN X 5-1/2″ REG BOX CROSSOVER SUB
X-OVER 5-1/2″ FH PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 6-3/8″ FH PIN X 7-5/8″ REG BOX CROSSOVER SUB
X-OVER 3-1/2″ FH PIN X 4-1/2″ REG BOX CROSSOVER SUB
X-OVER 4-1/2″ REG PIN X 4-1/2″ IF BOX CROSSOVER SUB
X-OVER 4-1/2″ IF PIN X 4-1/2″ IF BOX CROSSOVER SUB
X-OVER 3-1/2″ IF PIN X 3-1/2″ IF BOX CROSSOVER SUB
SPIRAL DRILL COLLAR
SPIRAL DRILL COLLARS SHOULD BE SUPPLIED WITH SLIP AND ELEVATOR RECESS WITH STRESS RELIEF GROOVE WITH THREADS PROTECTORS ,THE RADIUS OF THE UPPER RECESS SHOULDER HAS TO BE COLD ROLLED. SPIRAL DRILL COLLARS
SDC SPIRAL DRILL COLLARS 9-1/2″ OD 31FT(+-6″) 7-5/8″ REG CONNECTION SPIRAL DRILL COLLARS
SDC SPIRAL DRILL COLLARS 8″ OR 8-1/4″ OD 31FT(+-6″) 6-5/8″ REG CONNECTION SPIRAL DRILL COLLARS
SDC SPIRAL DRILL COLLARS 6-1/2″ OR 6-1/4″ OD 31FT(+-6″) 4-1/2″ REG CONNECTION SPIRAL DRILL COLLARS
SDC SPIRAL DRILL COLLARS 4-3/4″ OD 31FT(+-6″) 3-1/2″ REG CONNECTION SPIRAL DRILL COLLARS
DZT SPIRAL 9-1/2″ OD PONY DRILL COLLARS(SAME ID),10 FT LONG WITH 7-5/8″ REG CONNECTION SPIRAL DRILL COLLARS
DZT SPIRAL DRILL COLLARS 8″ OR 8-1/4″ OD PONY DRILL COLLARS(SAME ID),10 FT LONG WITH 6-5/8″ REG CONNECTION SPIRAL DRILL COLLARS
DZT SPIRAL DRILL COLLARS 6-1/2″ OR 6-1/4″ OD PONY DRILL COLLARS(SAME ID),8-10 FT LONG WITH 4-1/2″ REG CONNECTION SPIRAL DRILL COLLARS
DZT SPIRAL DRILL COLLARS 4-3/4″ OD PONY DRILL COLLARS(SAME ID),6-10 FT LONG WITH 3-1/2″ REG CONNECTION SPIRAL DRILL COLLARS
9-1/2“ SPIRAL GROOVED DRILL COLLAR WITH SLIP AND ELEVATOR RECESSES FISHING NECK ID 3″ – OD 9-1/2″ , CONNE 7-5/8″ REG, STRESS RELIEF GROOVE ON PIN&BOX SPIRAL DRILL COLLARS
8-1/2“ SPIRAL GROOVED DRILL COLLAR WITH SLIP AND ELEVATOR RECESSES FISHING NECK ID 2-13/16″ – OD 8-1/4″ , CONNE 6-5/8″ REG, STRESS RELIEF GROOVE ON PIN&BOX SPIRAL DRILL COLLARS
6-1/2“ SPIRAL GROOVED DRILL COLLAR WITH SLIP AND ELEVATOR RECESSES FISHING NECK ID 2-1/4″ – OD 6-1/2″ , CONNE 4-1/2″ REG, STRESS RELIEF GROOVE ON PIN&BOX L SPIRAL DRILL COLLARS
4-3/4“ SPIRAL GROOVED DRILL COLLAR WITH SLIP AND ELEVATOR RECESSES FISHING NECK ID 2-1/4″ – OD 4-3/4″ , CONNE 3-1/2″ REG, STRESS RELIEF GROOVE ON PIN&BOX SPIRAL DRILL COLLARS
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT.1.5M LONG,4-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT. 3 M LONG,4-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT. 4.5M LONG,4-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT. 1.5 M LONG,3-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT. 3 M LONG,3-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
DZ 5″ X 19.5 PPF GRADE G-105 PUP JOINT. 4.5 M LONG,3-1/2″ IF PIN AND BOX CONNECTION PUP JOINT
KELLY COCK 6-1/2” OD, 10000 PSI WITH 4-1/2” IF BOX & PIN CONNECTION KELLY COCK
INSIDE BOP (GRAY INSIDE BOP) FOR 5” DP STRING,5,000 PSI WITH 4-1/2” IF CONNECTION. KELLY COCK
LOWER KELLY COCK, 69,000 KPA WP, 2 13/16” MIN ID. (OD 7 3/4” CONNECTION 6 5/8” REG B X P ) KELLY COCK
LOWER KELLY X/O (6 5/8″ REG B X 4″ HT40) KELLY COCK
LOWER KELLY X/O (6 5/8″ REG B X 3 1/2″ IF OVERALL LENGTH 30″ ) KELLY COCK
LOWER KELLY X/O (6 5/8″ REG B X 4″IF OVERALL LENGTH 30″ ) KELLY COCK
UPPER KELLY COCK 7-3/4〃 × 3〃
W/C 6-5/8 REG LH CONN. KELLY COCK
LOWER KELLY COCK 6-5/8〃 × 2-13/16〃
W/C 4-1/2 IF CONN. KELLY COCK
LOWER KELLY OD 7″ WITH 5-1/2 FH KELLY COCK
LOWER KELLY OD 6-5/8″ WITH 4-1/2 IF KELLY COCK
LOWER KELLY OD 6-1/4″ WITH 4 IF KELLY COCK
LOWER KELLY COCK OD 4-3/4″ WITH 3-1/2 IF KELLY COCK
LOWER KELLY COCK OD 3-3-8″ WITH 2-1/2 IF KELLY COCK
UPPER KELLY VALVES 5000 PSI WP FOR 5-1/4″ KELLY WITH 3-1/4″ BORE AND 6-5/8″ REG LH PIN X BOX CONNECTIONS KELLY VALVE
LOWER KELLY VALVES 5000 PSI WP FOR 5-1/4″ KELLY WITH 2-13/16″ BORE AND4-1/2 IF PIN X BOX CONNECTIONS KELLY VALVE
LOWER KELLY VALVES 5000 PSI WP FOR 4-1/4″ KELLY WITH 2-1/4″ BORE AND 3-1/2 IF PIN X BOX CONNECTIONS KELLY VALVE
BIT SUB 3-1/2 IF BOX X 3-1/2 REG BOX,
OD4-3/4〃ID 2〃 36〃LONG BIT SUB
BIT SUB4 IF BOX X 4-1/2 REG BOX,
OD6-1/2〃ID 2-1/4〃36〃LONG BIT SUB
BIT SUB 6-5/8 REG BOX X 6-5/8 REG BOX,OD8〃ID 2-13/16〃
36〃LONG WITH FLOAT BORE BIT SUB
BIT SUB 7-5/8 REG BOX × 6-5/8 REG BOX WITH FLOAT BORE, OD91/2〃ID 3〃 LENGTH 900 MM BIT SUB
BIT SUB 6-5/8 REG BOX × 6-5/8 REG BOX WITH FLOAT BORE, OD8〃ID 2-13/16〃LENGTH 900 MM BIT SUB
BIT SUB 4-1/2 REG BOX × 4-1/2 IF BOX WITH FLOAT BORE, OD6-1/2〃ID 2-13/16〃LENGTH 900 MM BIT SUB
7-5/8REG7-5/8REG WITH FLOAT BORE BIT SUB
7-5/8REG6-5/8REG WITH FLOAT BORE BIT SUB
6-5/8REG6-5/8REG WITH FLOAT BORE BIT SUB
6-5/8REG4-1/2IF WITH FLOAT BORE BIT SUB
4-1/2IF4-1/2IF WITH FLOAT BORE BIT SUB
3-1/2IF3-1/2IF WITH FLOAT BORE BIT SUB
7-5/8REG7-5/8REG WITH FLOAT BORE BIT SUB
7-5/8REG6-5/8REG WITH FLOAT BORE BIT SUB
6-5/8REG6-5/8REG WITH FLOAT BORE BIT SUB
6-5/8REG4-1/2IF WITH FLOAT BORE BIT SUB
4-1/2IF4-1/2IF WITH FLOAT BORE BIT SUB
3-1/2IF3-1/2IF WITH FLOAT BORE BIT SUB
7-5/8REG7-5/8REG WITHOUT FLOAT BORE BIT SUB
7-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG4-1/2IF WITHOUT FLOAT BORE BIT SUB
4-1/2IF4-1/2IF WITHOUT FLOAT BORE BIT SUB
3-1/2IF3-1/2IF WITHOUT FLOAT BORE BIT SUB
7-5/8REG7-5/8REG WITHOUT FLOAT BORE BIT SUB
7-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG4-1/2IF WITHOUT FLOAT BORE BIT SUB
4-1/2IF4-1/2IF WITHOUT FLOAT BORE BIT SUB
3-1/2IF3-1/2IF WITHOUT FLOAT BORE BIT SUB
Bit Sub 3-1/2 IF Box x 3-1/2 REG Box,
OD4-3/4〃ID 2〃 36〃Long BIT SUB
Bit Sub4 IF Box x 4-1/2 REG Box,
OD6-1/2〃ID 2-1/4〃36〃Long BIT SUB
Bit Sub 6-5/8 Reg Box x 6-5/8 REG Box,OD8〃 ID 2-13/16〃,36〃Long with Float Bore BIT SUB
BIT SUB 7-5/8 REG BOX × 6-5/8 REG BOX WITH FLOAT BORE, OD91/2〃ID 3〃 LENGTH 900 MM BIT SUB
BIT SUB 6-5/8 REG BOX × 6-5/8 REG BOX WITH FLOAT BORE, OD8〃ID 2-13/16〃LENGTH 900 MM BIT SUB
BIT SUB 4-1/2 REG BOX × 4-1/2 IF BOX WITH FLOAT BORE, OD6-1/2〃ID 2-13/16〃LENGTH 900 MM BIT SUB
7-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG6-5/8REG WITHOUT FLOAT BORE BIT SUB
6-5/8REG4-1/2IF WITHOUT FLOAT BORE BIT SUB
4-1/2IF4-1/2IF WITHOUT FLOAT BORE BIT SUB
3-1/2IF*3-1/2IF WITHOUT FLOAT BORE BIT SUB
LIFTING SUB 7-5/8″ REG PIN BOTTOM CONNECTION 5″ OD NECK-UP
ODCP 241.3 MM OVERALL LENGTH 1,000 MM LIFTING SUB
LIFTING SUB 6-5/8″ REG PIN BOTTOM CONNECTION 5″ OD NECK-UP
ODCP 209.6 MM OVERALL LENGTH 1,000 MM LIFTING SUB
LIFTING SUB 4-1/2″ REG PIN BOTTOM CONNECTION 5″ OD NECK-UP
ODCP 152.4 MM OVERALL LENGTH 1,000 MM LIFTING SUB
LIFTING SUB 3-1/2″ REG PIN BOTTOM CONNECTION 3-1/2″ OD NECK-UP
ODCP 121 MM OVERALL LENGTH 1,000 MM LIFTING SUB
LIFTING SUB FOR 11″ DRILL COLLAR: NOMINAL DRILL PIPE ELEVATOR SIZE 5″ – 6 1/2″ OD TOP AND 11″ OD BOTTOM SHOULDER – 18 DEGREE TAPER SHOULDER CONNECTIONS – 3″ ID – 7 5/8″ REG PIN DOWN CONNECTION. 36″ LENGTH LIFTING SUB
LIFTING SUB FOR 4 1/8″ DRILL COLLAR: NOMINAL DRILL PIPE ELEVATOR SIZE 2 7/8″ – 4 1/8″ OD TOP AND 4 1/8″ BOTTOM SHOULDER – 18 DEGREE TAPER SHOULDER CONNECTIONS – 2″ ID – 2 7/8″ IF PIN DOWN CONNECTION. 36″ LENGTH LIFTING SUB
LIFTING SUB FOR 3 1/8″ DRILL COLLAR: NOMINAL DRILL PIPE ELEVATOR SIZE 2 7/8″ – 4 1/8″ OD TOP AND 3 1/8″ BOTTOM SHOULDER – 18 DEGREE TAPER SHOULDER CONNECTIONS – 1 1/4″ ID – 2 3/8″ REG PIN DOWN CONNECTION. 36″ LENGTH LIFTING SUB
LIFTING SUBS FOR 9-1/2″ DC LIFTING SUB
LIFTING SUBS FOR 8″ DC LIFTING SUB
LIFTING SUBS FOR 6-1/2″ DC LIFTING SUB
FULL OPEN SAFETY VALVE OD 7-1/2″ WITH 5-1/2 FH(ODΦ190MM IDΦ76.2 MMLENGTH 830MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD6-1/2″ WITH 4-1/2 IF(ODΦ165MM IDΦ71.4MM LENGTH 720MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD 6-1/4″ WITH4 IF (ODΦ159MM IDΦ71.4MM LENGTH 720MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD 5-1/4″ WITH4 IF (ODΦ133MM IDΦ60MM LENGTH 800MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD 5 WITH3-1/2 IF(ODΦ127MM IDΦ50.8MM LENGTH 640MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD 4-3/4″ WITH3-1/2 IF(ODΦ121MM ID Φ50.8MM LENGTH 650MM ) FULL OPEN SAFETY VALVE
FULL OPEN SAFETY VALVE OD 3-1/2″” WITH2-3/8 IF(ODΦ89MM IDΦ30MM LENGTH 520MM ) FULL OPEN SAFETY VALVE
CUP TYPE TESTER CONNECTION 4-1/2 IF FOR 20″ CASING CUP TESTER
CUP&SEALS FOR 20″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION 4-1/2 IF FOR 13-3/8″ CASING,61-68 PPF CUP TESTER
CUP&SEALS FOR 13-3/8″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION 4-1/2 IF FOR 10-3/4″ CASING CUP TESTER
CUP&SEALS FOR10-3/4″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION 4-1/2 IF FOR 9-5/8″ CASING CUP TESTER
CUP&SEALS FOR 9-5/8″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION3-1/2 IF FOR 7″ CASING CUP TESTER
CUP&SEALS FOR 7″ CASING CUP TESTER
CUP&SEALS FOR 7-5/8″ CASING CUP TESTER
CUP&SEALS FOR 8-5/8″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION 2-7/8 IF FOR 5-1/2″ CASING CUP TESTER
CUP&SEALS FOR 5-1/2″ CASING CUP TESTER
CUP TYPE TESTER CONNECTION2-3/8 IF FOR 4-1/2″ CASING CUP TESTER
CUP&SEALS FOR 4-1/2″ CASING CUP TESTER
FLAT MILL SHOE FOR 6″ HOLE (OD 5 1/8″,connection 2-7/8REG)
FLAT MILL SHOE FOR 8 1/2″ HOLE (OD 8″,connection 4-1/2REG)
FLAT MILL SHOE FOR 12 1/4″ HOLE (OD 11″,connection 6-5/8REG)
FLAT MILL SHOE FOR 17 1/2″ HOLE (OD 14″,connection 7-5/8REG)
8 1/4″ OD FLAT MILL W/4-1/2″ REG , DRESSED WITH CRUSHED SINTERED TUNGSTEN CARBIDES FOR OPERATION INSIDE 8 1/2″ HOLE SIZE AND FURNISHED WITH 4 1/2″ REGULAR PIN TOP CONNECTION
5 3/4″ OD FLAT MILL W/3-1/2″ REG , DRESSED WITH CRUSHED SINTERD TUNGSTEN CARBIDE AND FURNISHED WITH 3 1/2″ REGULAR PIN TOP CONNECTION
5-1/4″ FLAT BOTTOM MILL
7-1/2″ FLAT BOTTOM MILL
11″ FLAT BOTTOM MILL
OD 15″
OD 12″
OD 8-1/8″
OD 5-1/4″
7-5/8 REG BOX (FOR HOLE SIZE 28″ 28OD Φ508MM FISHING OD Φ241MM LENGTH 650MM)
7-5/8 REG BOX (FOR HOLE SIZE 22″OD Φ457MM FISHING OD Φ241MM LENGTH 650MM)
7-5/8 REG BOX (FOR HOLE SIZE 17-1/2″OD Φ406MM FISHING OD Φ241MM LENGTH 650MM)
7-5/8 REG BOX (FOR HOLE SIZE 17″OD Φ356MM FISHING OD Φ241MM LENGTH 580MM)
7-5/8 REG BOX (FOR HOLE SIZE 16-1/2″OD Φ343MM FISHING OD Φ241MM LENGTH 580MM)
6-5/8 REG BOX (FOR HOLE SIZE 16″OD Φ311MM FISHING OD Φ203MM LENGTH 610MM)
6-5/8 REGBOX (FOR HOLE SIZE 12-1/4″OD Φ280MM FISHING OD Φ203MM LENGTH 610MM)
4-1/2 REG BOX (FOR HOLE SIZE 8-1/2″OD Φ203MM FISHING OD Φ159MM LENGTH 530MM)
2-7/8 REG BOX (FOR HOLE SIZE 8″OD Φ165MM FISHING OD Φ111MM LENGTH 530MM)
2-7/8 REG BOX (FOR HOLE SIZE 6-1/8″OD Φ130MM FISHING OD Φ111MM LENGTH 530MM)
FISHING MAGNET FOR 6″ HOLE( 5″OD connection 3-/2REG)
FISHING MAGNET FOR 8 1/2″ HOLE( 8″OD connection 4-1/2IF)
FISHING MAGNET FOR 10 3/4″ HOLE( 10″OD connection 6-5/8REG)
FISHING MAGNET FOR 12 1/4″ HOLE( 11″OD connection 6-5/8REG)
FISHING MAGNET 16″ X 7-5/8″ REG PIN UP
FISHING MAGNET 11-1/2″ X 6-5/8″ REG PIN UP
FISHING MAGNET 7-1/4″ X 4-1/2″ REG PIN UP
FISHING MAGNET 5″ X 3-1/2″ REG PIN UP
3-1/2″ FISHING MAGNET( connection 2-3/8 IF)
7″ FISHING MAGNET( connection 4-1/2 IF)
8-1/2″ FISHING MAGNET( connection 4-1/2 IF)
13-3/8″ FISHING MAGNET( connection 6-5/8REG)
JUNK SUBS FOR 17 1/2″ HOLE( 12-7/8″OD connection 7-5/8″ REG)
JUNK SUBS FOR 12 1/4″ HOLE( 9-5/8″OD connection 6-5/8″ REG)
JUNK SUBS FOR 8 1/2″ HOLE( 6-5/8″OD connection 4-1/2″ REG)
JUNK SUBS FOR 6″ HOLE( 5″OD connection 3-1/2″ REG)
JUNK SUB FOR 9-1/2″ DRILL COLLAR STRING 7-5/8″ REG PIN UP 7-5/8″ REG BOX DOWN( 12-7/8″OD connection 7-5/8″ REG)
JUNK SUB FOR 8-1/4″ DRILL COLLAR STRING 6-5/8″ REG PIN UP 6-5/8″ REG BOX DOWN( 9-5/8″OD connection 6-5/8″ REG)
JUNK SUB FOR 6-3/4″ DRILL COLLAR STRING 4-1/2″ REG PIN UP 4-1/2″ REG BOX DOWN( 6-5/8″OD connection 4-1/2″ REG)
JUNK SUB FOR 4-3/4″ DRILL COLLAR STRING 3-1/2″ REG PIN UP 3-1/2″ REG BOX DOWN( 5-3/4″OD connection 3-1/2″ REG)
FISHING CUP( 5″OD connection 3-1/2″ REG)
FISHING CUP( 6-5/8″OD connection 4-1/2″ REG)
FISHING CUP( 7″OD connection 4-1/2″ REG)
FISHING CUP( 10-3/4″OD connection 6-5/8″ REG)
FISHING CUP( 13-3/8″OD connection 7-5/8″ REG)
JUNK SUBS FOR 17 1/2″ HOLE( 12-7/8″OD connection 7-5/8″ REG)
JUNK SUBS FOR 12 1/4″ HOLE( 9-5/8″OD connection 6-5/8″ REG)
JUNK SUBS FOR 8 1/2″ HOLE( 6-5/8″OD connection 4-1/2″ REG)
JUNK SUBS FOR 6″ HOLE( 5″OD connection 3-1/2″ REG)
JUNK SUB FOR 9-1/2″ DRILL COLLAR STRING 7-5/8″ REG PIN UP 7-5/8″ REG BOX DOWN( 12-7/8″OD connection 7-5/8″ REG)
JUNK SUB FOR 8-1/4″ DRILL COLLAR STRING 6-5/8″ REG PIN UP 6-5/8″ REG BOX DOWN( 9-5/8″OD connection 6-5/8″ REG)
JUNK SUB FOR 6-3/4″ DRILL COLLAR STRING 4-1/2″ REG PIN UP 4-1/2″ REG BOX DOWN( 6-5/8″OD connection 4-1/2″ REG)
JUNK SUB FOR 4-3/4″ DRILL COLLAR STRING 3-1/2″ REG PIN UP 3-1/2″ REG BOX DOWN( 5-3/4″OD connection 3-1/2″ REG)
FISHING CUP( 5″OD connection 3-1/2″ REG)
FISHING CUP( 6-5/8″OD connection 4-1/2″ REG)
FISHING CUP( 7″OD connection 4-1/2″ REG)
FISHING CUP( 10-3/4″OD connection 6-5/8″ REG)
FISHING CUP( 13-3/8″OD connection 7-5/8″ REG)
GZ86-1 NC26(2A10) 16 39～67
GZ86-2 NC26(2A10) 20 54～77
GZ95-1 NC26(2A10) 25 68～89
GZ105-1 NC31(210) 20 54～77
GZ105-2 NC31(210) 25 72～90
GZ105-3 NC31(210) 15 43～87
GZ105-4 NC31(210) 25 76～100
GZ105-5 NC31(210) 8 30～76
GZ121 NC38(310) 16 45～67
GZ121 NC38(310) 20 55～89
GZ121 NC38(310) 20 88～103
GZ159 NC50（410） 25 88～103
GZ159 NC50（410） 25 112～108
LT-T89 89 60.3 47.6 NC26 4600 LT-T194 194 159 141 NC50
LT-T92 92 73 63.5 NC26 4600 LT-T200 200 159 141 NC50
LT-T95 95 76.2 66.6 NC26 4600 LT-T206 206 178 163 NC50
LT-T102 102 73 60.3 NC26 5500 LT-T206A 206 168 152 NC50
LT-T105 105 85.7 73 NC31 5500 LT-T219 219 178 159 NC50
LT-T114 114 89 75 NC31 6100 LT-T232 232 203 187 NC50
LT-T117 117 89 78 NC31 6100 LT-T244 244 206 184 6 5/8REG
LT-T127 127 95 80 NC38 6500 LT-T260 260 219 200 6 5/8REG
LT-T143 143 120.6 102 NC38 6900 LT-T270 270 228.6 209.6 6 5/8REG
LT-T152 152 128 111 NC38 7200 LT-T273 273 241.3 216 6 5/8REG
LT-T168 168 127 114 NC50 8900 LT-T286 286 244.5 225.4 6 5/8REG
LT-T168B 168 139.7 120.6 NC50 8900 LT-T298A 298 257 238.1 6 5/8REG
LT-T181 181 146 127 NC50 10500 LT-T340 340 286 260 6 5/8REG
PUP JOINT
5 1/2″
PUP JOINT 5 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: 5 1/2″FH
-LENGTH RANGE: 5 FEET
5 1/2″
PUP JOINT 5 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION: 5 1/2″FH
-LENGTH RANGE: 10 FEET
5 1/2″
PUP JOINT 5 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: 5 1/2″FH
-LENGTH RANGE: 15 FEET
5″
PUP JOINT 5″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC50 (4 1/2″ IF)
-LENGTH RANGE: 5 FEET
5″
PUP JOINT 5″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION: NC50 (4 1/2″ IF)
-LENGTH RANGE: 10 FEET
5″
PUP JOINT 5″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC50 (4 1/2″ IF)
-LENGTH RANGE: 15 FEET
4 1/2″
PUP JOINT 4 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC46 (4″ IF)
-LENGTH RANGE: 5 FEET
4 1/2″
PUP JOINT 4 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION: NC46 (4″ IF)
-LENGTH RANGE: 10 FEET
4 1/2″
PUP JOINT 4 1/2″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION:NC46 (4″ IF)
-LENGTH RANGE: 15 FEET
4″
PUP JOINT 4″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC46 (4″ IF)
-LENGTH RANGE: 5 FEET
4″
PUP JOINT 4″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION: NC46 (4″ IF)
-LENGTH RANGE: 10 FEET
4″
PUP JOINT 4″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION:NC46 (4″ IF)
-LENGTH RANGE: 15 FEET
3 1/2″
PUP JOINT 3-1/2” PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH: 5 FEET
3 1/2″
PUP JOINT 3-1/2” PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH: 10 FEET
3 1/2″
PUP JOINT 3-1/2” PUP JOINT
-GRADE: 4137 ALLOY STEEL
-NTEGRAL TYPE
-CONNECTION: NC38 (3 1/2″ IF)
-LENGTH: 15 FEET
2 7/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC31 (2 7/8″ IF)
-LENGTH RANGE: 5 FEET
2 7/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION: NC31 (2 7/8″ IF)
-LENGTH RANGE: 10 FEET
2 7/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC31 (2 7/8″ IF)
-LENGTH RANGE: 15 FEET
2 3/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC26 (2 3/8″ IF)
-LENGTH RANGE: 5 FEET
2 3/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
– INTEGRAL TYPE
-CONNECTION:NC26 (2 3/8″ IF)
-LENGTH RANGE: 10 FEET
2 3/8″
PUP JOINT 2 7/8″ PUP JOINT
-GRADE: 4137 ALLOY STEEL
-INTEGRAL TYPE
-CONNECTION: NC26 (2 3/8″ IF)
–LENGTH RANGE: 15 FEET